Specific determination of 20 primary aromatic amines in aqueous food simulants by liquid chromatography-electrospray ionization-tandem mass spectrometry

A multi-analyte method without any pre-treatment steps using reversed-phase liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) was developed and applied for the determination of 20 primary aromatic amines (PAA) associated with polyurethane (PUR) products or azo-colours. The method was validated in-house for water and 3% acetic acid food simulants using spiked migrates from plastic laminates. Detection limits ranged from 0.27 to 3 microg amine/L food simulants, and RSD values of within-laboratory reproducibility at the 2 microg PAA/L level ranged from 3.9 to 19%. PAA migration from plastic laminates and black nylon cooking utensils were determined with the method, and high levels of 4,4'-methylenedianiline and aniline were found in migrates from about half of the tested cooking utensils. The method fulfils present legislative demands in the EU for screening and verification of PAA migration from food contact materials.     

Cascade cyclizations via N,4-didehydro-2-(phenylamino)pyridine biradicals/zwitterions generated from enyne-carbodiimides

Thermolysis of the enyne-carbodiimides 7 having the central carbon-carbon double bond incorporated as part of the cyclopentene ring favors the formation of the corresponding N,4-didehydro-2-(phenylamino)pyridine intermediates, either as the sigma,pi-biradicals 8 or as the zwitterions 8', for subsequent synthetic elaborations. By placing appropriate substituents at the acetylenic terminus, a variety of the intramolecular decay routes are available for the initially formed sigma,pi-biradicals/zwitterions, leading to the 5,6-dihydrobenzo[c][1,8]naphthyridine 21, the 1,2,3,4-tetrahydro[1,8]naphthyridine 24 and related compounds 25 and 26, the 5,6-dihydrobenz[f]isoquinoline 28, and the benzofuro[3,2-c]pyridine 30. Surprisingly, the use of the dimethylamino group of the 2-(dimethylamino)phenyl substituent to capture the carbocationic center in the zwitterion 8e' furnished the 5H-pyrido[4,3-b]indole 32 in only 14% yield. The majority of the products were the 1H-pyrrolo[2,3-b]quinolines 34 and 35, isolated in 48 and 7% yields, respectively. However, it was possible to redirect the reaction toward 32 by conducting thermolysis of the enyne-carbodiimide 7e in the presence of 5 equiv of dimethylphenylsilyl chloride. Under this reaction condition, the 2-pyridone imine 37 was isolated in 86% yield, which on exposure to silica gel was converted to 32 in essentially quantitative yield. Thermolysis of the enyne-carbodiimide 42 having a methoxymethyl substituent at the acetylenic terminus led to the formation of 46' as a pyridine analogue of ortho-quinone methide imine. An intramolecular hetero-Diels-Alder reaction of 46' then furnished the tetrahydro[1,8]naphthyridino[2,1-c][1,4]benzoxazine 47.     

Microwave—optical double resonance in the A1A2 excited state of thioformaldehyde

Microwave—optical double resonance experiments have been carried out on the 4_o¹ band of the $\text{A}$¹A₂$\text{X}$¹A₁ system of thioformaldehyde (H₂CS). More than 100 microwave and radiofrequency transitions have been observed in the $\text{A}$¹A₂ excited state. Many of these transitions are magnetically sensitive. Some of the excited state levels are perturbed by triplet levels and others by high vibrational levels of the ground state.     

Synthesis and structural characterization of [SiMe2(C5H4)2][(C5Me5) Zr(μ-S)]2. a dinuclear zirconocenophane complex with a skewed dimethylsilyl-bridged bis(cyclopentadienyl) ligand

The reaction of [SiMe₂(C₅H₄)₂][(C₅Me₅)ZrMe₂]₂ with H₂S at 110°C proceeds with the formation of [SiMe₂(C₅H₄)₂][(C₅Me₅)Zr(-S)]₂]₂. The molecular structure of this dinuclear zirconocenophane compound features a non-planar four-membered Zr₂(-S)_{2 2} ring with two symmetrically-bridging sulfido groups. The bridging dimethylsilyl-bridged bis(cyclopentadienyl) ligand adopts a skewed orientation to accommodate the long Zr ... Zr separation of 3.611(1) Å. This compound crystallizes in the centrosymmetric space group P1 with refined lattice parameters ofa = 10.905(1) Å,b = 10.939(2) Å,c = 14.621(2) Å, = 106.32(1)°, = 91.25(1)°, = 111.25(1)°,V = 1545.1(8) ų, _calc. = 1.512g/cm³,Z=2. Full-matrix refinement converged with final discrepancy indices of R(F _o = 0.045 andR(F _o) = 0.079 with GOF= 1.60 for 4403 data withF _o > 3(F _o).This paper is dedicated to Professor Larry Dahl, a valued friend and mentor, on the occasion of his 65th birthday and in recognition of his significant fundamental contributions to the field of metal cluster chemistry. May the Goddess Fortuna continue to bring distinction and honor to him and his research endeavors.     

Synthesis and characterization of Di-π-cyclopentadienyl- metal pentasulfides of titanium(IV) and vanadium (IV):an operational test of the influence of an unpaired electron on the molecular geometry

Our preparation of Ti(h⁵?C₅H₅)₂ S₅ by the reaction of elemental sulfur with Ti(h⁵?C₅H₅)₂(CO)₂ in hexane and of V(h⁵?C₅H₅)₂S₅?$\text{1}\text{2}$ H₂O by the reacti of V(h⁵?C₅H₅)₂ Cl₂ with Na₂S₅ in THF and structural analyses by single crystal X-ray diffraction (together with infrared, solution EPR, and temperaturedependent magnetic susceptibility measurements) represent an extension of our previous work on M(h⁵?C₅H₅)₂ (SC₆H₅)₂ (M = Ti, V). The crystallographic results provide further support of our previous conclusions that the Ballhausen—Dahl model is not valid for M(h⁵?C₅H₅)₂L₂ systems. The structuralfeatures of the chair-like titanium and vanadium pentasulfide molecules are compared to the corresponding phenylmercapto analogs and to the chair-like cyclohexasulfur molecule in rhombohedral sulfur. Ti(h⁵?C₅H₅)₂S₅ was isolated as a mixture of monoclinic and orthorhombic Crystalline phases-which were both characterized by preliminary X-ray data. A complete Structural determination and refinement of the monoclinic phase, which contains two independent molecules in a cell of dimensions a 22.843(2), b 7.958(1), c 14.465(1) Å, β 90.074(4)° and symmetry P2₁/c, yielded R₁ 5.3 % and R₂ 5.9 % for 2168 independent diffractometry-collected data with I≥ 2.5o(I). V(h⁵?C₅H₅)₂S₅-$\text{1}\text{2}$ H₂O contains four V(h⁵?C₅H₅)₂S₅ molecules and two water molecules of hydration (of crystallographic site symmetry C₂-2) in onorthorhombic unit cell of symmetry P2₁2₁2 and of dimensions a 13.491(1), b 12.748(1), c 7.715(1) Å. Least-squares refinement of 750 diffractometry data with I≥2.0σ(I) gave R₁ 2.4% and R₂ 3.0% Both of these compounds were independently synthesized and Spectroscopically characterized by Köpf and co-workers, and-a Complete X-ray diffraction study was performed by Epstein and Bernal on a different monoclinic phase of Ti(h⁵?C₅H₅)₂S₅ (isolated by-Köpf). An extraction of V(h⁵?C₅H₅)₂S₅ with re fluxing benzene under nitrogen atmosphere in a Soxhlet apparatus led to the formation of the previously reported [V₂ (h⁵?C₅H₅)₂S₅]_n compound which was characterized by physical measurements including a preliminary X-ray diffraction study.     

Synthesis and Spectroscopic Characterization of N2-(N-Acetyl-6-O-stearoyl-α-D-muramoyl)-L-alanyl-D-isoglutamine

Title compound 1 was synthesized by a published route which had to be modified (seven steps from readily obtainable starting materials). Characterization of 1 was achieved by spectroscopic means (FAB-MS, ¹H-NMR, including 2D-COSY). Furthermore, commercially available reference material purchased for comparison, was unequivocally established to be 10 , i.e. incompletely deprotected 1 .     

3',4'-trans-linked bicyclic nucleosides locked in S-type conformations

A novel class of 3',4'-trans-linked bicyclic nucleosides with locked S-type furanose conformations is introduced by synthesis of two model derivatives; one was obtained by cyclic ether formation and the other by ring-closing metathesis methodology.     

Capacitive-discharge-heated anisotropic pyrolytic graphite furnace used for atomic absorption spectrometry Part 2. Experimental Verification of Temperature Distribution of the Furnace Surface and of the Gas Phase

The predictions of a theoretical model, embodied in a computer program, describing the heating characteristics of the furnace surface and the gas phase of an anisotropic pyrolytic graphite furnace heated by the capacitive discharge technique are compared with the experimental results obtained by optical pyrometry and by two-line atomic absorption spectrometry, respectively. The surface temperature gradient around the circumference of the type 1 furnace and along the optical axis of the type 3 furnace are calculated and compared with the measured temperatures. The weighted-average of the theoretically predicted gas temperature is in reasonable agreement with the effective vapour temperature measured by two-line atomic absorption method. The heating rate of the furnace does not have a significant effect on the temperature distribution of either the furnace surface or the gas phase. The effect of the difference in the temperature distribution of the type 1 and type 3 furnaces on the atomic absorption signals is also discussed.     

Importance of the choice of assumptions and models in the estimation of analytical quality specifications

The validity of any model depends on its ability to imagine the situation or problem to which it is applied. Further, the assumptions made in relation to the model are determining for the actual outcome. Within the field of clinical biochemistry a lot of models for analytical quality specifications, based on a variety of concepts and ’clinical settings’, have been proposed. A hierarchical structure for application of these approaches and models has been agreed on at several occasions in 1999. In this hierarchy, the highest rank is given to evaluation of analytical quality specifications based on ’clinical settings’/’clinical outcome’ models, followed by specifications based on biological variation and on ’clinicians opinions’. This contribution, deals with the problems of combining random and systematic errors and the implications of application of different models to a variety of clinical settings. Received: 1 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium