Hydrolytic protein cleavage mediated by unusual mononuclear copper(II) complexes: X-ray structures and solution studies

The crystal structures and redox and UV-vis/EPR spectroscopic properties of two new mononuclear copper(II) complexes, [Cu(HL1)Cl2] (1) and [Cu(L1)Cl] (2), prepared through the reaction between copper(II) chloride and the ligand 2-[(bis(pyridylmethyl)amino)methyl]-4-methyl-6-formylphenol (HL1) under distinct base conditions, are reported along with solution studies. Also, we demonstrate that these CuII complexes are able to cleave unactivated peptide bonds from bovine serum albumin (BSA) and the thermostable enzyme Taq DNA polymerase at micromolar concentration, under mild pH and temperature conditions. The cleavage activity seems to be specific with defined proteolytic fragments appearing after protein treatment. The location of the specific cleavage sites was tentatively assigned to solvent-accessible portions of the protein. These are two of the most active Cu(II) complexes described to date, since their cleavage activity is detected in minutes and evidence is here presented for a hydrolytic mechanism mediating protein cleavage by these complexes.     

Nitrite catalyzes reductive nitrosylation of the water-soluble Ferri-Heme model FeIII(TPPS) to FeII(TPPS)(NO)

Quantitative investigation of the reaction of the ferri-heme model compound Fe(III)(TPPS)(H(2)O)(2) (1) to give Fe(II)(TPPS)(NO) (2) (TPPS = tetra(4-sulfonato-phenyl)porphinato) in buffered aqueous solution demonstrates a slow pH-independent reductive nitrosylation pathway in the pH range 4-6. The rate of this reaction is subject to modest general base catalysis. In the course of this study, a surprising catalytic pathway whereby nitrite ion (NO(2)(-)) strongly catalyzes the reduction of 1 to 2 under reductive nitrosylation conditions was demonstrated.     

Perchlorate interchange during the redox process of PPy/PVS films in an acetonitrile medium. a voltammetric and EDX study

Polypyrrole/poly(vinyl sulfonate) (PPy/PVS) films in acetonitrile containing 0.1 M LiClO4 were studied by cyclic voltammetry. Consecutive voltammograms pointed to a continuous increase in the charge involved in the process, suggesting a rise in the number of the electroactive participants involved in the redox process. However, voltammograms obtained for the PPy/ClO4 films in analogous conditions pointed to a steady-state behavior from the very early cycles. Theoretical studies based on the Nernst and Butler-Volmer equations indicated that perchlorate ions are involved during the oxidation/reduction process of the PPy/PVS films when the steady state is reached. This result was confirmed by "ex situ" energy-dispersive X-ray analysis of the films. In this regard, the electrochemical behavior of PPy/PVS polymers was similar to that of PPy/ClO4 films when a high number of cycles were carried out. The exchange of ClO4- during the redox reaction of the PPy/PVS films made it necessary to incorporate Li+ cations inside the polymer during the initial voltammetric cycles to compensate for the negative charges of PVS polyanions. Li+ cations are mainly stabilized inside the polymer by the ion pairs formed with the sulfonated groups of the PVS. An increase and shift of the voltammetric cycles indicated a restructuring of the polymeric chains with consecutive scans.     

Rapid spectrophotometric determination of chlorate with dimedone bisthiosemicarbazone monohydrochloride

Summary Dimedone bisthiosemicarbazone monohydrochloride has been examined to evaluate its usefulness as a reagent for rapid and sensitive Spectrophotometric determination of chlorate (0.5–5.0 ppm) by oxidation of the reagent in 70% perchloric acid medium and measurement of the yellow product. The molar absorptivity at 417 nm is 1.86×10⁴ l·mole^–1·cm^–1. The relative standard deviation is 1.6% for 2.5 ppm of chlorate.

---

Spektropbotometrische Bestimmung von Chlorat mit Dimedonbisthiosemicarbazon-monocblorhydrat (I)

Zusammenfassung Die Verwendbarkeit von I als Reagens für die rasche und empfindliche spektrophotometrische Bestimmung von 0,5–5,0 ppm Chlorat durch Oxydation von I in 70%iger Perchlorsäure und Messung des gelben Reaktionsproduktes wurde untersucht. Die molare Absorptivität bei 417 nm beträgt 1,86×10⁴ l·mol^–1·cm^–1. Die relative Standardabweichung beträgt 1,6% für 2,5 ppm Chlorat.

     

Metal-oxygen-metal arrays in lamellar hybrid materials: cobalt and manganese 4-cyclohexene-1,2-dicarboxylates

We have obtained three layered hybrid materials from the hydrothermal reaction of 4-cyclohexene-1,2-dicarboxylic acid with Co and Mn salts: Co(C(8)H(8)O(4))[1], Mn(H(2)O)(C(8)H(8)O(4))[2], and Mn(4)(H(2)O)(C(8)H(8)O(4))(4).0.3(H(2)O)[3]. The structures for all materials were solved by single-crystal XRD ([1]P1, a=4.805(2) A, b=6.650(3) A, c=12.960(6) A, alpha=98.285(7) degrees, beta=98.986(7) degrees, gamma=95.689(7) degrees, V= 401.6(3) A(3), R(1)= 0.0438; [2] P2(1)/c, a=11.151(2) A, b=11.330(2) A, c=7.6560(15) A, beta=108.813(3) degrees , V=915.6(3) A(3), R(1)=0.0412; [3] P1, a= 11.412(3) A, b=12.136(4) A, c=13.809(4) A, alpha=104.703(6) degrees, beta=103.207(6) degrees, gamma=92.468(5) degrees, V=1790.6(9) A(3), R(1)=0.1056). While all three structures are two-dimensional overall, the metal-oxygen-metal dimensionality within the layers varies from isolated metal atoms in the case of [1] to 1D ribbons of vertex sharing MnO(6) octahedra [2] and 2D arrays of edge- and vertex-sharing polyhedra in [3].     

99Ru Mössbauer spectra of quaternary ruthenium(V) oxides with the hexagonal barium titanate structure

⁹⁹Ru Mössbauer spectra have been recorded at 4.2 K for the quaternary oxides Ba₃Ru₂MO₉ (M = Mg, Ca, Sr; Co, Ni, Cu, Zn; and Cd), all of which crystallize with the hexagonal barium titanate structure. The Ca, Sr, and Cd compounds give sharp symmetrical singlets with chemical isomer shifts typical of ruthenium in the +5 oxidation state. The absence of magnetic hyperfine splitting is consistent with the published interpretation of magnetic susceptibility data in terms of binuclear intracluster spin pairing which leads to an S = 0 ground state. In contrast, magnetic hyperfine splitting is seen for the Mg, Zn, Co, Ni, and Cu compounds; this can be interpreted only in terms of long-range magnetic order and the absence of such an S = 0 ground state at 4.2 K. This differs from the published interpretation of the magnetic susceptibility data for Ba₃Ru₂MgO₉ in the low-temperature region. The magnetic flux densities at the ruthenium nuclei in the magnetically ordered compounds (32.5–51.6 T) are lower than those normally associated with ruthenium(V), and the spectra cannot be curve fitted satisfactorily with single hyperfine patterns having the natural linewidth. Possible reasons for these observations are discussed.     

Excess magnitudes for the benzene + n-dodecane system at 298.15 and 323.15 K

The vapor pressures for benzene + n-dodecane mixtures have been measured using a static apparatus. Values for the excess Gibbs energy have been calculated using a modified form of Barker's method and fitted to a Padé approximant equation. Selection of the most adequate approximant is made according to objective criteria. The results are compared with those corresponding to other benzene + n-alkane systems. The values for the activity coefficient of benzene at infinite dilution calculated from these data agrees very well with the values obtained by gas-liquid chromatography.     

Phototoxic effects of Hypericum extract in cultures of human keratinocytes compared with those of psoralen

Extracts of Hypericum perforatum (St. John's wort) are used in the treatment of depression. They contain the plant pigment hypericin and hypericin derivates. These compounds have light-dependent activities. In order to estimate the potential risk of phototoxic skin damage during antidepressive therapy, we investigated the phototoxic activity of hypericin extract using cultures of human keratinocytes and compared it with the effect of the well-known phototoxic agent psoralen. The absorbance spectrum of our Hypericum extract revealed maxima in the whole UV range and in parts of the visible range. We cultivated human keratinocytes in the presence of different Hypericum concentrations and irradiated the cells with 150 mJ/cm2 UVB, 1 J/cm2 UVA or 3 h with a white light of photon flux density 2.6 mumol m-2 s-1. The determination of the bromodeoxyuridine incorporation rate showed a concentration- and light-dependent decrease in DNA synthesis with high hypericin concentrations (> or = 50 micrograms/mL) combined with UVA or visible light radiation. In the case of UVB irradiation a clear phototoxic cell reaction was not detected. We found phototoxic effects even with 10 ng/mL psoralen using UVA with the same study design as in the case of the Hypericum extract. These results confirm the phototoxic activity of Hypericum extract on human keratinocytes. However, the blood levels that are to be expected during antidepressive therapy are presumably too low to induce phototoxic skin reactions.     

An ab initio 4-21G gradient study of clavulanic acid

The structure of five conformations of the-lac inhibitor clavulanic acid have been optimized using ab initio gradient methods at the 4-21G level. The conformations of lowest energy possess an intramolecular H bond and also have the lowest pyramidization of N1. Different side-chain conformations lead to (i) differences in anomeric interactions and variations of the hydroxyethylidene geometry and (ii) changes in the geometry of the ring skeleton, which are smaller in the four- than in the five-membered ring.On leave from Universidad de Santiago de Compostela, Departamento de Química Física, Facultad de Química, Galicia (Spain).