飞行器供配电系统地面通用测试接口设计

供配电地面测试负责为飞行器提供模拟供电、控制状态切换、采集并传输系统状态信息,配合完成全飞行器全周期的综合测试任务。本文首先简要介绍了供配电地面测试系统的基本功能和设备组成,然后对供电、控制、测量的接口设计进行分析,最后提出接口通用化设计方案。本文为电气系统地面通用化测试研究提供了有益尝试。     

基于二维直方图和模糊熵准则的阈值化方法

图像分割是图像分析、识别和理解的基础。图像分割主要是指将图像分成各具特性的区域并提取出感兴趣目标的技术,其研究多年来一直受到人们的高度重视;阈值化法是图像分割的一种重要方法,在图像处理与识别中广为应用;针对图像分割中细节往往被忽略导致后续处理困难的问题,基于模糊关系和最大模糊熵原理提出了一种阈值化方法,对二维直方图进行模糊分割;为了获得图像分割中的细节,提出的方法根据最大熵原则自动确定模糊区域和门限,进而获得二维模糊熵和遗传算法最优解,最后获得图像细节;通过对不同灰度水平和颜色类型图像进行实验比较,实验结果表明提出的方法优于二维非模糊方法和一维模糊熵分割法,得到该方法在图像分割中获得细节的结论。     

小型轻便式流速仪检定系统设计

为满足FP系列流速仪的计量检定需求,提出了一种小型便携式流速仪检定系统的设计方案。根据匀速运动时间等约束条件确定了环形水槽的几何参数。采用FPGA和上位机作为数据处理和控制核心,实现了对伺服电机转速的精确控制。设计了光电编码器和无线摄像机与上位机之间的通信方式,实现了检定装置标准流速值和被检仪器示值的数据读取。对测试数据的处理方法和测控软件的结构框架进行了分析。同时,对实验装置的测量误差进行了分析。结果表明,标准流速值的扩展不确定度为1.28×10-3m/s,检定装置符合量值传递要求,可作为FP系列流速仪计量检定的标准装置。     

An asymmetric imidazole derivative as potential fluorescent chemosensor for Fe in aqueous solution

A novel conjugated molecule, L, based on 2,4,5-triphenylimidazole and 6-phenyl-2,2′-bipyridine (HC^∧N^∧N) was synthesized in two steps. The molecule can recognize Fe³⁺ in aqueous solution (THF/H₂O, 1/1, v/v) by the appearance of new emission bands at 416 and 442 nm, which can be attributed to the emission of the newly formed L-Fe³⁺ complex. The binding constant of the complex was calculated to be (6.6±0.39)×10³ M⁻¹, and its formation was also confirmed by the appearance of isosbestic points at 312 and 381 nm in the UV-visible spectral titration experiment. While other transition and rare-earth metal ions, such as Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Eu³⁺ and Nd³⁺, can only cause some decrease of L's fluorescence, alkali and alkaline earth metal ions, such as Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺, almost have no effect on L's fluorescence. The fluorescence of L can be recovered by the addition of EDTA to the L-Fe³⁺ system just due to EDTA's stronger chelating ability than that of L.     

Anisotropic partial differential equation noise-reduction algorithm based on fringe feature for ESPI

Noise reduction is one of the most exciting problems in electronic speckle pattern interferometry. We present a new anisotropic partial differential equation noise-reduction algorithm based on fringe orientation for interferometric fringe patterns. The proposed equation performs diffusion along the two directions of fringe gradient and isophote line, which are extracted accurately according to fringe feature. By restriction of diffusion in the gradient direction of fringe patterns, this method can provide optimal results in denoising but does not destroy fringe edges. The experimental results show that this technique is more capable of significantly improving the quality of the fringe patterns than the classical anisotropic diffusion equation proposed by Perona and Malik. Based on our filtered fringe patterns, the phase map obtained by phase-shifting technique can be extracted more accurately. It is an effective pre-processing method for electronic speckle pattern interferometry.     

Improved biological performance of low modulus Ti-24Nb-4Zr-7.9Sn implants due to surface modification by anodic oxidation

Dental implants are usually made from commercially pure titanium or titanium alloys. The purpose of this study was to evaluate the influence of surface treatment to low modulus Ti-24Nb-4Zr-7.9Sn (TNZS) on cell and bone responses. The TNZS alloy samples were modified using anodic oxidation (AD). Surface oxide properties were characterized by using various surface analytic techniques, involving scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS), X-ray diffractometry (XRD) and surface profilometer. During the AD treatment, porous titanium oxide layer was formed and Ca ions were incorporated into the oxide layer. The viability and morphology of osteoblasts on Ca-incorporated TNZS were studied. The bone responses of Ca-incorporated TNZS were evaluated by pull-out tests and morphological analysis after implantation in rabbit tibiae. The non-treated Ti and TNZS samples were used as the control. Significant increases in cell viability and pull-out forces (p < 0.05) were observed for Ca-incorporated TNZS implants compared with those for the control groups. Porous structures supplied positive guidance cues for osteoblasts to attach. The enhanced cell and bone responses to Ca-incorporated TNZS implants could be explained by the surface chemistry and microtopography.     

Synthesis of intrinsic fluorescent polypyrrole nanoparticles by atmospheric pressure plasma polymerization

Intrinsic fluorescent polypyrrole (ppy) nanoparticles with different shapes were fabricated by atmospheric pressure plasma polymerization. Gradient electrical field and polarization of active particles in the plasma induce change of shape of nanoparticles from spherical to rod, when the plasma power varied from 5 W to 10 W. Both X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) results suggest that the atmospheric pressure plasma polymerization process (APPP) at the power of 5 W and 10 W can help to preserve the integrity of the structure of monomer due to the predominant role of radical polymerization in APPP at these powers. However, when the plasma power increased to 20 W, the ring structure of some pyrroles was destroyed, owing to existence of higher energy species. The polypyrrole nanoparticles exhibit the peak fluorescence around 415 nm. Fluorescent results show that the fluorescent properties of polypyrrole nanoparticles are related to the particle size of the polymer. The bigger particles would have more enlarged room for exciton diffusion, resulting in lower fluorescence intensity and red shift of the fluorescent peak.     

Surface analysis of long-distance oxygen plasma sterilized PTFE film

The influence of long-distance oxygen plasma sterilization on surface properties of substrate material, i.e., medical poly(tetrafluoroethylene) (PTFE), and aging effect of these sterilized PTFE film surfaces were investigated by contact angle measurement, mass loss determination, scanning electron microscopy (SEM) as well as bacterial adhesion and platelet adhesion measurements in vitro, respectively. The changes in chemical structure of sterilized PTFE film were followed using X-ray photoelectron spectroscopy (XPS). As a result of plasma sterilization oxygen-containing functional groups (such as CO and CO), especially the CO group are introduced into PTFE surfaces, and thus pronounced increases of surface free energy and surface wettability are presented when the sample positions are within 0-40 cm. The film surface wettability degrades little as the aging time continued as long as 190 days. At the same time, the minimal surface degradation and damage occur on the sterilized PTFE when the sample position is at 40 cm. Moreover, the antibacterial adhesion and blood compatibility of sterilized PTFE surface are enhanced and the optimal effects are also obtained at 40 cm. The essential reason may be due to the optimal equilibrium between surface wettability and surface damage, which is achieved at 40 cm. Overall, of the surface properties of long-distance oxygen plasma sterilized PTFE analyzed, the sterilization at 40 cm is optimal.     

Microstructure evolution in the rapidly quenched Fe78Si9B13 ribbons

We report microstructure evolution in as-spun Fe₇₈Si₉B₁₃ ribbons under various wheel speeds (s), which was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). With decreasing s, the volume fraction of the residual amorphous phase (V_a) in the as-spun ribbons decreases gradually, and the total exothermic heat of the crystallization in the DSC curves also decreases, but the ratio of the exothermic heat of the second crystallization to the first one is on the contrary. α-Fe is found in the ribbon with s of 32.9 m/s, while α-Fe, eutectic α-Fe+Fe₂B, and Fe₃Si phases are found in ribbons with s of 25.6 and 18.3 m/s. The phase precipitating behavior in cooling processes is well consistent with the annealing process in the literatures.     

Preparation of In2S3 nanopraricle by ultrasonic dispersion and its tribology property

In this paper, we describe a facile and rapid method for preparing In2S3 nanoparticles via ultrasound dispersion. This method allows us to prepare In2S3 nanoparticles from bulk indium and sulfur with ease and without using expensive agents and in a short time. The possible growing mechanism of the In2S3 nanoparticles was presented. In addition, we provide detailed characterizations including TEM, XRD, TG-DTA, and XPS to study the shape, composition and structure of In2S3 nanoparticles. We also studied the tribology property of In2S3 nanoparticles made using this novel recipe.