蒙脱土表面键合配位体固相萃取填料的制备及其对重金属离子的吸附性能

通过酸洗、硅烷偶联剂表面活化、键合苯甲酰异硫氰酸酯对蒙脱土进行改性,制得新型固相萃取(SPE)材料。 采用红外光谱、扫描电子显微镜、X射线光电子能谱表征了改性蒙脱土的结构和形貌。 考察了制备的SPE填料对水中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺的吸附性能,确定了最佳固相萃取条件,对6种金属离子吸附容量分别为10.83、11.92、12.67、10.43、10.01及10.54 mg/g。 通过SPE与电感耦合等离子体质谱联用测定了样品中As³⁺、Bi³⁺、Cu²⁺、Sb³⁺、Sn²⁺和Pb²⁺ 6种重金属离子的含量,检出限分别为0.024、0.013、0.075、0.037、0.011和0.064 μg/L。     

Determination of the sulfur components of gasoline streams by capillary column gas chromatography with sulfur chemiluminescence detection

A method using a sulfur chemiluminescence detector (SCD) has been developed for the qualitative and quantitative determination of sulfur components in stabilized gasoline-range process streams, including blended gasolines containing between 1 and > 4000 ppm total sulfur. The detection limit per sulfur component was approximately 50 ppb. On-column injection was employed for optimum precision and accuracy. A new probe material was found which did not soften under FID operating conditions. A new method, using a hydrogen sulfide permeation tube, was developed for rapid alignment of the probe in the FID.     

Adsorption modes of cysteine on Au(111): thiolate, amino-thiolate, disulfide

The adsorption of cysteine on the (111) surface of gold has been studied by means of periodic supercell density-functional theory calculations. A number of different adsorption modes are examined, including adsorption through the thiol group in either thiolate or disulfide form, and adsorption through both the thiol and amino functional groups. We find that at intermediate coverage densities the latter mode of adsorption is favored, followed by thiolate adsorption at the bridge (slightly displace toward fcc) site. The N-Au and S-Au bond strengths in the amino-thiolate adsorption are estimated to be of the order of 6 and 47 kcal/mol, respectively. The electronic structure of the different systems is analyzed, with focus on the total and projected density of states, as well as on the detailed character of the electronic states at the interface. States near the Fermi energy are found to have a metal-molecule antibonding character, whereas metal-molecule bonding states mostly occur near the lower edge of the Au-d band.     

Electron traps on oxide surfaces: (H+)(e-) pairs stabilized on the surface of 17O enriched CaO.

(H+)(e-) pairs generated at the surface of polycrystalline CaO are analyzed for the first time in terms of the interaction of the unpaired electron spin with the nuclear spin of the 17O anions of the surface. CaO crystals enriched in the 17O isotope are prepared and the corresponding hyperfine coupling constants are measured in electron paramagentic resonance (EPR) spectra. The results are analyzed on the basis of cluster model density functional theory calculations. The computed hyperfine coupling constants for (H+)(e-) pairs formed on the edge, corner, and reverse corner sites of the CaO surface allow a tentative assignment of two observed spectral features to specific morphological surface sites.     

Speciation of sulfur-containing compounds in diesel by comprehensive two-dimensional gas chromatography

Sulfur-containing compounds in diesel have been speciated by comprehensive two-dimensional gas chromatography (GCxGC) with a sulfur chemiluminescence detector (SCD). The advantages of GCxGC technique are higher resolution and greater sensitivity. GCxGC-SCD can achieve the class separation of sulfur-containing compounds with an appropriate separation column combination. The major classes of sulfur-containing compounds in diesel are benzothiophenes and dibenzothiophenes. Relative concentration of each class as well as each carbon number family can be quantitated by the summation of the integrated areas corresponding to the individual group(s) in the GCxGC space. In practical applications, GCxGC-SCD can be used to characterize different diesels and to reflect desulfurization process efficiency. In this study, GCxGC-SCD has demonstrated its value in speciation of sulfur-containing compounds classes, which is difficult to accomplish by any other single technique.     

3—Mercaptopropionic Acid Capped Gold Nanoclusters：Quantized Capacitance in Aquesous Media

3-Mercaptopropionic acid monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electorn microscopy,UV-Vis spectroscopy,X-ray photoelectron spectroscopy and Fourler transform infrared spectroscopy.The exact value of quantized double-layer capacitance of MPCs in aqueous media was obtained by differential pulse voltammograms.     

Determination of radium isotopes in mineral and environmental water samples by alpha-spectrometry

Summary A method for the determination of low-level radium isotopes in mineral and environmental water samples by alpha-spectrometry has been developed. Radium-225, which is in equilibrium with its mother ²²⁹Th, was used as a yield tracer. Radium were preconcentrated from water samples by coprecipitation with BaSO₄and iron (III) hydroxide at pH 8-9 using ammonia solution, then isolated from uranium, thorium and iron using a Microthene-TOPO chromatography column at 8M HCl, separated from barium in a cation-exchange resin column using 0.05M 1,2-cyclohexylenedinitrilotetraacetic acid monohydrate at pH 8.5 as an eluant, and finally electrodeposited on a stainless steel disc in a medium of 0.17M (NH₄)₂C₂O₄at pH 2.6 and current density of 400 mA^. cm^-2, and counted bya-spectrometry. Optimum experimental conditions for radium separation, purification and electrodeposition have been studied and discussed in the paper. The lower limits of detection of the method are 0.11 mBq^. l^-1for ²²⁶Ra, ²²⁸Ra and ²²⁴Ra, respectively, if 2 l of water are analyzed. The method has been checked with a certified reference material IAEA-Soil-6 supplied by the International Atomic Energy Agency and reliable results were obtained. Eighteen water samples collected in Italy have been analyzed with the method, the mean radiochemical yields for radium were 86.2±6.5%. The obtained radium concentrations were in the range of 0.50-60.8 mBq^. l^-1for ²²⁶Ra, of 0.10-25.7 mBq^. l^-1for ²²⁸Ra, and of￡LLD-7.97 mBq^. l^-1for ²²⁴Ra. The ²²⁸Ra/²²⁶Ra and ²²⁴Ra/²²⁶Ra ratios were in the range of 0.189-4.45 and￡LLD-0.941, respectively.     

Preparation and Characterization of Three-dimensionally Ordered Crystalline Macroporous CeO2

Three-dimensional ordered macroporous (3DOM) materials are of great potential importance in catalysis, selective separation, sensor arrays and communications with optical band gaps1. Many results in the synthesis of 3DOM materials have been reported, such as closed-packed silica spheres or polystyrenes (PS) templating routes for silica2, metal oxides1-6 and metals7. Recently, poly(methyl methacrylate) (PMMA) colloidal crystal templates have been used to prepare 3DOM materials of metals8,…     

Origin of visible-light-driven photocatalysis: A comparative study on N/F-doped and N-F-codoped TiO2 powders by means of experimental characterizations and theoretical calculations

An overall comparative study was carried out on N-doped, F-doped, and N-F-codoped TiO₂ powders (NTO, FTO, NFTO) synthesized by spray pyrolysis in order to elucidate the origin of their visible-light-driven photocatalysis. The comparisons in their experimentally obtained characteristics were based on the analysis of XPS, UV-Vis, PL, NH₃-TPD and ESR spectra. The comparisons in their theoretically predicted properties were based on the analysis of the calculated electronic structures. As the results, N-doping into TiO₂ resulted in not only the improvement in visible-light absorption but also the creation of surface oxygen vacancies. F-doping produced several beneficial effects including the creation of surface oxygen vacancies, the enhancement of surface acidity and the increase of Ti³⁺ ions. Doped N atoms formed a localized energy state above the valence band of TiO₂, whereas doped F atoms themselves had no influence on the band structure. The photocatalytic tests indicated that the NFTO demonstrated the highest visible-light activity for decompositions of both acetaldehyde and trichloroethylene. This high activity was ascribed to a synergetic consequence of several beneficial effects induced by the N-F-codoping.     

Fluorine-doped TiO2 powders prepared by spray pyrolysis and their improved photocatalytic activity for decomposition of gas-phase acetaldehyde

F-doped TiO₂ (FTO) powders were synthesized by spray pyrolysis (SP) from an aqueous solution of H₂TiF₆. The resulting FTO powders possessed spherical particles with a rough surface morphology and a strong surface acidity. The fluorine concentrations in the FTO powders calculated from XPS spectra significantly depended on SP temperature and ranged from 2.76 to 9.40 at.%. The FTO powder prepared at SP temperature of 1173 K demonstrated the highest photocatalytic activity for the decomposition of gas-phase acetaldehyde under both ultraviolet (UV) and visible light (vis) irradiations, and it was higher than that of commercial P 25. This high photocatalytic activity was ascribed to several beneficial effects produced by F-doping: enhancement of surface acidity, creation of oxygen vacancies, and increase of active sites. It was interesting to point out that the vis photocatalytic activity of FTO powders was achieved by the creation of surface oxygen vacancies rather than the improvement of optical absorption property of bulk TiO₂ in vis region.