In-house validation for analytical methods and quality control for risk evaluation of chlordecone in food

Chlordecone was used until 1993 as a pesticide in the banana plantation of Martinique and Guadeloupe (French Antilles) against the root borer. This organochlorine pesticide was lipophilic, remnant, and toxic for human beings with both acute and chronic effects. Chlordecone was strongly absorbed and stored in soil and weakly decomposed in environment. Surveys conducted in 2001 revealed its presence in soil, rivers, and domestic food products. Local food (fruits and vegetables, cattle, poultry, and fish) was growing on soils, widely contaminated by chlordecone, used in the past as banana plantations. In 2003, French Administration asked for a risk evaluation for the Antilles population. The French Agency for Food Safety, proposed a Provisional Tolerable Daily Intake of 0.0005?mg?kg^?1?b.w.?day^?1, and an Acute Reference Dose of 0.01?mg?kg^?1?b.w.?day^?1, based on a toxicological risk assessment. The French National Reference Laboratory for pesticides has carried out two analytical methods, one for food of animal origin and another for food of fruit and vegetable origin. These methods were validated in the reference laboratory and dispatched to 13 laboratories for a proficiency test before the launch of two studies on Martinique and Guadeloupe food. About 900 samples from Martinique were sent to the network of laboratories for analysis of chlordecone. Performance parameters obtained through the proficiency test were briefly reported. The quality control test proposed in this study was discussed to shed light on the true variability achievable by intra-laboratory and inter-laboratory analysis. The limits of conventional quality-control procedures were discussed, and a process was proposed in order to get better confidence in analytical results.     

Optimization Strategy for Isocratic Separation of α-Aspartame and Its Breakdown Products by Reversed Phase Liquid Chromatography

α-Aspartame (L-α-aspartyl-L-phenylalanine methyl ester) is increasingly being used in wide variety of commonly consumed food products. This structure contains ester and peptide bonds. The ester linkage may hydrolyze to produce L-α-aspartyl-L-phenylalanine or cyclohydrolyze to produce the corresponding diketopiperazine ring. This ring can open to form L-α-aspartyl-L-phenylalanine and ultimately this compound can hydrolyze to L-phenylalanine and L-aspartic acid. The pH, buffer type, concentration, the presence of water and temperature are other important factors affecting its stability. Because α-aspartame can lose its sweetness under these conditions determination of aspartame and its breakdown products is extremely important for diet foods quality. The optimum mobile phase for the chromatographic separation was found to be acetonitrile-water (20:80, ν/ν) with 5.10^?3 M hexanesulfonic acid and a pH of 2.6.     

Extraction-ability and -selectivity of tetra-aza-crown ethers for transition metal cations

In order to investigate the relative effects of the differences between the structures and lipophilicities of 1, 10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TA-18-crown-6) and the tetrabenzyl derivative of 1,10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TBTA-18-crown-6) on their extraction-abilities and -selectivities for transition metal cations, constants of the overall extraction (logK _ex) of 1:1 (M:L) complexes, the distribution (K _D) for two diluents (CH₂Cl₂ and CHCl₃) with different dielectric constants have been determined at 25 ± 0.1 °C. The magnitude of logK _ex is largely determined by that of K _D. The equilibrium constants of TA-18-crown-6 have been compared with those of TBTA-18-crown-6. It is found that:(i) logK _ex sequences of TA-18-crown-6 and TBTA-18-crown-6 for transition metals in CH₂Cl₂ lie in order: Fe³⁺ > Cu²⁺ > Mn²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ and Fe³⁺ > Cu²⁺ > Co²⁺ > Mn²⁺ > Ni²⁺ > Cd²⁺ > Zn²⁺ respectively; (ii) the stability sequences of two types of tetra-aza-crown ethers with the transition metal cations in CHCl₃ are the same as follows: Fe³⁺ > Ni²⁺ > Cu²⁺ > Co²⁺ > Zn²⁺ > Cd²⁺ > Mn²⁺, and (iii) unusual selectivities are observed for transition metal-tetra-aza-crowns, e.g. the high Fe³⁺/M ⁿ⁺ selectivity factors (S_f) of TA-18-crown-6, except for the competitive-extractions for the special case in CHCl₃ of TBTA-18-crown-6, it was found that the Mn²⁺/M ⁿ⁺ values were relatively higher according to the other transition metal cations. A systematic sequence in these two types of solvents is not found for a given transition metal cation in terms of the variation of selectivity with the tetra-aza-crown ethers. The results provide alternatives for the rational design of other specific ligands on the transition metal cations.     

A Study of Adsorption of Water Vapour on Wool under Static and Dynamic Conditions

Adsorption of water vapour on wool provides not only textile comfort, but also convenience in transportation due to increase in its bulk density. The adsorption and desorption isotherms of water vapour for wool were determined by both volumetric technique using a Coulter Omnisorp 100CX instrument and gravimetric method employing a Cahn 2000 electronic microbalance. Adsorption isotherm fitting to B.E.T. model and hysteresis on desorption was observed. The average effective diffusion coefficient of water in wool was found to be 8.4 × 10^-14 m²s^-1 at 25°C from gravimetric data. The effects of packing height and air velocity on the breakthrough curves were also investigated in the wool packed columns. For pseudo first order model, k values changing between 0.33 × 10^-6 – 69 × 10^-6 s^-1 was obtained for 2.2–6.4 cm s^-1 air velocity and 0.05–0.20 m packing height ranges.     

The Synthesis of Novel Crown Ethers, Part VII [1]. Coumarin Derivatives of Benzocrowns and Cation Binding from Fluorescence Spectra

4-[3-(1-benzopyran-2-one)] derivativesof benzo[12]crown-4, benzo[15]crown-5 andbenzo-[18]crown-6 were synthesized from4-[3-(1-benzopyran-2-one)]-1,2-dihydroxy-benzenereacting with bis-ethyleneglycol dihalides orpentaethylene glycol ditosylate in alkali carbonate/DMF/water. The original products were identified byhigh resolution EI-mass spectra as well as IR,¹H-NMR and ¹³C-NMR spectroscopy. The 1 : 1binding constants of Mg²⁺, Li⁺, Na⁺ andK⁺ with the coumarin-benzocrowns were estimated usingfluorescence emission spectroscopy in acetonitrile.The complexing enhanced quenching fluorescence spectra(CEQFS) and complexing enhanced fluorescence spectra(CEFS) exhibited the ion binding powers due tocationic recognition rules of the macrocycles.     

Synthesis and proton conductivity studies of polystyrene‐based triazole functional polymer membranes

In this study, poly(vinylbenzylchloride) (PVBC) was produced by free‐radical polymerization of 4‐vinylbenzylchloride, and then it was functionalized with 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). The composition of the polymers was verified by elemental analysis, and the structure was characterized by Fourier transform infrared and ¹³C‐nuclear magnetic resonance spectra. PVBC was modified by ATri with 68% and Tri with 50% yield. The polymers were doped with trifluoromethanesulfonic acid (TA) at various molar ratios, X = 0.5, 1, 2, and 3 with respect to aminotriazole and triazole units. Proton transfer from TA to the triazole rings was proved with Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the samples are thermally stable up to approximately 200 °C. Differential scanning calorimetry results illustrated the homogeneity of the materials. Under anhydrous conditions, PVBCATri3TA and PVBCTri3TA showed highest proton conductivity of 0.086 and 0.042 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Sol–gel synthesis of IPTES and D10H consisting fluorinated silane system for hydrophobic applications

In this study, new fluorinated silane system was prepared by adding hydroxyl terminated Fluorolink D10H oligomer to 3-isocyanatopropyltrietoxysilane. The obtained silane system was independently composed with 3-Glycidyloxypropyltrimethoxysilane and 3-Glycidyloxy-propyltriethoxysilane. Then the prepared two different coating solutions were applied to glass surface by spin-coating method. The chemical bonding between groups in system was investigated by FTIR analysis. The elemental composition of coatings was determined by using EDX analysis. Their structure and surface properties were analyzed by scanning electron microscopy, atomic force microscopy, contact angle measurement and UV–vis spectrophotometer. The amounts of fluorine on the coatings prepared with IPTES-D10H-GLYEO and IPTES-D10H-GLYMO were 33 and 34 %wt, respectively. Transparent coatings with smooth surface and uniform thickness were obtained. The coatings had nanoscale roughness. The contact angles of coatings for water were range from 103° to 110°, and for n-hexadecane were range from 59° to 62°.     

Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Ruthenium(II) complexes derived from 2‐phenylthiazoline‐4‐carboxylic acid: structure and catalytic activity for transfer hydrogenation reaction

Piano‐stool ([(p‐cymene)Ru(thz)Cl], 2 ) and six‐coordinated ([Ru(thz)₂(PPh₃)₂], 3 ) ruthenium complexes derived from 2‐phenylthiazoline‐4‐carboxylic acid (Hthz, 1 ) were synthesized for the first time, and fully characterized using conventional methods. Also, the molecular structure of complex 3 was determined using X‐ray analysis. These complexes were evaluated as catalysts for transfer hydrogenation of carbonyl compounds in the presence of isopropyl alcohol and KO^tBu. Complex 2 was found to be more active than 3 in transfer hydrogenation. Copyright © 2016 John Wiley & Sons, Ltd.