Structure Recovery and Recycling of Used LiCoO2 Cathode Material

A large number of lithium batteries have been retiring from the market of energy storage. Thus, recycling of the used electrode materials is becoming urgent. In this study, an industrial machinery processing was used to recover the crystal structure of the waste LiCoO₂ materials with the combination of small-scale equipment repair technology. The results show that the crystal parameters of the repaired LiCoO₂ material become small, the unit cell volume is reduced, and the crystal structure tends to be stable. The Co−O bond length of 1.9134 nm, O−Co−O bond angle of 94.72°, the (003) interplanar spacing of 0.467 nm indicate the excellent recovery level of the repaired LiCoO₂. In addition, the electrochemical performance of the repaired LiCoO₂ material is greatly improved, compared with the waste material. The capacity of the repaired electrode material can be maintained at 120 mAh g⁻¹ after 100 cycles at the current density of 0.2C. The promising rate performance of the repaired electrode material demonstrates the stable structure. This research work provides a large-scale method for the direct recovery of LiCoO₂ with the reduction of unnecessary energy and reagent consumption, which will be beneficial to the environmental protection.     

La-Mn-Ni-O催化剂组成、结构、还原性能及氧化活性

用硝酸盐分解法合成了LaMn_(1-x)Ni_xO_3(0≤2≤1.0), 研究了组成、晶体结构及其与还原性能、CO和CH_3OH催化氧化活性的关系。XRD证实在0.0≤x≤1.0范围内, 本体系都生成单一钙钛矿结构: 0.0≤x≤0.4, 0.8相似文献   

香草醛异烟酰腙与钴、镍、铜、锌和镉配合物的合成和性质研究

本文合成了香草醛异烟酰腙(H₂L^Ⅰ)和邻香草醛异烟酰腙(H₂L^Ⅱ)与钴(Ⅱ)、镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)和镉(Ⅱ)的九个新配合物:M(HL^Ⅰ)₂·nH₂O[M(Ⅱ)=Co、Ni、Cu、Zn和Cd,n=0,2]和M(HL^Ⅱ)₂·nH₂O[M(Ⅱ)=Co、Ni、Cu和Zn,n=0-3]。采用     

单次碰撞条件下，反应Ba+C2H5Br、n-C3H7Br、1,2-C2H4Br2、1,3-C3H6Br2的动力学研究

Under single-collision beam-gas scattering conditions the reactions Ba+ C_2H, Br、n-C_3H_7Br、1, 2-C_2H_4Br_2、1,3-C_3H_6Br_2 have been studied using laser induced fluore-scence to detect the BaBr X~2∑~+ product. The vibrational distributions, the fractions of the available energy going into vibrational and rotational energy of the BaBr products have been calculated by means. of computer simulation. It has been found that the average vibrationel energies of the BaBr products can be described as a linear function of the mass factors for the reactions Ba+CH_3Br、C_2H_5Br、n-C_3H_7Br、1,3-C_3H_6Br, and that the potential energy surfaces for these reactions are similar. For the reactions Ba+CH_3Br、C_2H_5Br、n-C_3H_7Br, the vibrational increae, but for the reactions Ba+CH_2Br_2、1,2-C_2H_4Br_2、1,3-C_3H_6Br_2, the vibrational excitations of the BaBr products decrease greatly when the number of the carbons increase.     

石油亚砜与N,N—二（仲辛基）乙酰胺协同萃淋树脂分离富集金和钯

本文报导了石油亚砜与N,N-二(仲辛基)乙酰胺二元协同萃淋树脂吸萃金和钯的性能。该树脂的饱和吸萃容量为148mg Au/g干树脂。用0.5％硫脲可有效地洗脱柱床上的金和钯。     

Direct, facile aldehyde and ketone alpha-selenenylation reactions promoted by L-prolinamide and pyrrolidine sulfonamide organocatalysts

[reaction: see text] A new catalytic method for direct alpha-selenenylation reactions of aldehydes and ketones has been developed. The results of exploratory studies have demonstrated that L-prolinamide is an effective catalyst for alpha-selenenylation reactions of aldehydes, whereas pyrrolidine trifluoromethanesulfonamide efficiently promotes reactions of ketones. Under optimized reaction conditions, using N-(phenylseleno)phthalimide as the selenenylation reagent in CH2Cl2 in the presence of L-prolinamide (2 mol %) or pyrrolidine trifluoromethanesulfonamide (10 mol %), a variety of aldehydes and ketones undergo this process to generate alpha-selenenylation products in high yields. Mechanistic insight into the L-proline and L-prolinamide catalyzed alpha-selenenylation reactions of aldehydes with N-(phenylseleno)phthalimide has come from theoretical studies employing ab initio methods and density functional theory. The results reveal that (1) the rate-limiting step of the process involves attack of the enamine intermediate at selenium in N-(phenylseleno)phthalimide and (2) the energy of the transition state for the reaction catalyzed by prolinamide is lower than that promoted by proline. This result is consistent with experimental observations. The role of hydrogen bond interactions in stabilizing the transition states for this process is also discussed.     

Investigation of the crystallization process in 2 nm CdSe quantum dots

Investigation of the growth of CdSe nanocrystals ( approximately 160 atoms) to the uniquely stable size of 2 nm allows the monitoring of the crystallization process in semiconductor quantum dots. By using a combination of optical techniques, high-resolution transmission electron microscopy (HRTEM), and powder X-ray diffractometry (XRD), new phenomena were explored during the CdSe nanocrystal growth process, which involved significant morphological reconstruction and crystallization of the initially formed amorphous nanoparticles. During the crystallization, the absorption onset of the CdSe quantum dots blue shifted toward higher energies at 3 eV (414 nm), while the photoluminescence red shifted to lower energies. Furthermore, an apparent increasing Stokes shift was observed during the formation of small CdSe nanoparticles. On the other hand, the photoluminescence excitation spectra showed constant features over the reaction time. Additionally, results from HRTEM and XRD studies show that the CdSe nanoparticles were amorphous at early reaction stages and became better crystallized after longer reaction times, while the particle size remained the same during the crystallization process. These observations demonstrate the important role of the surface on the optical properties of small CdSe quantum dots and facilitated the spectroscopic monitoring of the crystallization process in quantum dots.     

Determination of oleanolic acid and ursolic acid in cornel by cyclodextrin-modified micellar electrokinetic chromatography

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method was established for the determination of oleanolic acid and ursolic acid in cornel. The two components were separated in the running buffer of 40 mmol/L sodium borate containing 5% methanol, 25 mmol/L SDS and 15 mmol/L hydroxypropyl-beta-cyclodextrin (HP-beta-CD). The applied voltage was 24 kV. The wavelength of detection was 200 nm. The temperature was kept at 25 C. Cinnamic acid was used as the internal standard. The analytical performance of the method was tested with respect to linearity, precision and recovery. The calibration curves were linear in the range of 10.15-243.6 microg/mL, r=0.9993 (oleanolic acid) and 10.07-241.7 microg/mL, r=0.9994 (ursolic acid); the intra-day precision (RSD) was less than 3.7% (oleanolic acid) and 4.1% (ursolic acid); the inter-day precision (RSD) was less than 4.2% (oleanolic acid) and 4.9% (ursolic acid). The limits of detection were 1.6 microg/mL for both components. The method proved to be sensitive, rapid, accurate and suitable for the determination of oleanolic acid and ursolic acid in cornel.