Feedback stabilization of snap-through buckling in a preloaded two-bar linkage with hysteresis

We study a linearly damped preloaded two-bar linkage that exhibits hysteresis due to the presence of multiple attracting equilibria. The dynamics at the unstable equilibrium, through which a snap-through buckle occurs, are not linearizable due to a solution-dependent singularity. We stabilize the unstable equilibrium using two distinct non-linear controllers. The feedback-linearization controller requires knowledge of the linkage parameters, whereas the robust version of the intrinsic non-linear proportional-derivative controller requires only an upper bound on the stiffness.     

Synthesis and polymerization of a new nitrogen‐containing bis‐ortho‐diynylarene monomer

This study focuses on the preparation, characterization, and optical properties of new bis(3,4‐diphenylethynylphenyl)phenylamine. This is the first nitrogen‐containing bis‐ortho‐diynylarene (BODA) monomer having a nitrogen atom as the spacer group. BODA monomers are usually prepared from common bisphenols, thereby providing great synthetic versatility and the opportunity to develop a wide array of novel polyarylene thermosets by varying the aromatic spacer group. The new bis(3,4‐bisphenylethynylphenyl)phenylamine was synthesized in five steps. This compound emits an intense blue color (λ = 438 nm) upon irradiation by UV light and may be suitable for use as an emitting layer in electroluminescent devices. Bis‐(3,4‐bisphenylethynylphenyl)phenylamine and its polymer have photoluminescence quantum yields 34 and 38%, respectively, and long excited‐state lifetimes of 3.2 and 3.6 ns, respectively. The structure of the monomer and its polymer were characterized using spectroscopic techniques including Ultraviolet–visible Spectrophotometer, Photoluminescence Spectrophotometer, Fourier Transform infrared spectroscopy, and Gel Permeation Chromatography. The polymerizations were studied by Differential Scanning Calorimeter. The amount of weight loss and the thermostability of the nitrogen‐containing polymer were determined from thermogravimetric analysis. The electrical conductivity of neat HCl‐doped BODA‐derived polymer film was measured according to the standard four‐point probe technique. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6988–6996, 2006     

Crystallization of Arthrobacter sp. strain 1C N-(1-D-carboxyethyl)-L-norvaline dehydrogenase and its complex with NAD+

The novel NAD+-linked opine dehydrogenase from a soil isolate Arthrobacter sp. strain 1C belongs to an enzyme superfamily whose members exhibit quite diverse substrate specificites. Crystals of this opine dehydrogenase, obtained in the presence or absence of co-factor and substrates, have been shown to diffract to beyond 1.8 ? resolution. X-ray precession photographs have established that the crystals belong to space group P21212, with cell parameters a = 104.9, b = 80.0, c = 45.5 ? and a single subunit in the asymmetric unit. The elucidation of the three-dimensional structure of this enzyme will provide a structural framework for this novel class of dehydrogenases to enable a comparison to be made with other enzyme families and also as the basis for mutagenesis experiments directed towards the production of natural and synthetic opine-type compounds containing two chiral centres.     

Electrical characteristics of a small active volume (1 cm3) discharge-pumped XeCl laser

Through the use of a PFL (pulse-forming line) of conveniently changeable output impedance Z_O, the electrical characteristics of a small volume-discharge of standard XeCl laser gas mix was studied. The impedance Z_D from a 2×0.5×1(=1) cm³ discharge was found to be about 10. A PFL of very low impedance is therefore rather inefficient in driving the discharge, because of the impedance mismatch and the slower current rise time. The data presented will be useful for the design of excimer lasers of small discharge volume, which find applications in serving as master oscillator or in high repetition rate operation.     

Mass spectrometry analysis of synthetically myristoylated peptides

Myristoylpeptides were synthesized in order to determine if a neutral loss of 210 Da, C14H26O (the mass of the myristoyl moiety), was universal and observable by both liquid chromatography electrospray ionization quadrupole ion trap (LC-ESI-QIT) and matrix-assisted laser desorption/ionization time-of-flight time-of-flight (MALDI-ToF/ToF) mass spectrometry. Myristoylation was successfully introduced on the N-terminus, internally on the amino group of lysine and arginine. Larger peptides and the arginine compounds needed elevated temperatures for myristoylation. To our knowledge, this is the first report of a chemically-synthesized myristoylated arginine in a peptide. Collision energy studies for the LC-ESI-QIT instrument showed that modified peptides and a loss of 210 Da could be detected under commonly used conditions (energy level between 30 and 42%) with picomole amounts of sample. The loss of myristoyl moiety is observed on the MALDI-Tof/Tof mass spectrometer as well. Due to the hydrophobic properties of the myristoyl moiety, it is not surprising that the modified peptides all formed at least dimers, and in some cases trimers. We were also able to distinguish a mixture of two mono-myristoylated peptides. MS3 data from the LC-ESI-QIT instrument on a di-myristoylated peptide indicates the loss of 210 Da at either the N-terminus or lysine. We were also able to analyze a mixture of modified and unmodified peptides on the MALDI-ToF/ToF instrument. The data presented in this paper demonstrates the constant neutral loss of the 210 Da, C14H26O, from both N-terminally and internally myristoylated peptides can be identified unambiguously using LC-ESI-QIT or MALDI-ToF/ToF mass spectrometers. This will be a useful tool in determining the myristoylation status of candidate proteins after enzyme digestion, and in elucidating the modification sites of internal myristoyl proteins.     

Bis(1,2-bis(diphenylphosphino)ethane)tungsten(0) Complexes Containing Electron-Saturated Metal Centers and Singly-Coordinated Bridging Ligands

Reaction of 1,4-diisocyanobenzene or 4-isocyanobenzonitrile with trans-W(N(2))(2)(DPPE)(2) (DPPE = 1,2-bis(diphenylphosphino)ethane) produced cis-WL(2)(DPPE)(2), where L = 1,4-diisocyanobenzene or 4-isocyanobenzonitrile. cis-(CNC(6)H(4)NC)(2)W(DPPE)(2) crystallizes in the triclinic space group P&onemacr;, with a = 12.848(3) ?, b = 13.596(3) ?, c = 19.072(3) ?, alpha = 78.99(2) degrees, beta = 70.66(2) degrees, gamma = 65.26(2) degrees, V = 2849.8(11) ?(3), and Z = 2. cis-(NCC(6)H(4)NC)(2)W(DPPE)(2) crystallizes in the triclinic space group P&onemacr;, with a = 12.712(3) ?, b = 13.700(3) ?, c = 19.109(3) ?, alpha = 77.91(2) degrees, beta = 70.63(2) degrees, gamma = 64.76(2) degrees, V = 2830.7(13) ?(3), and Z = 2. Both compounds possess a distorted octahedral geometry about the metal center, with the two isocyanide ligands cis to one another. The isocyanide ligands are substantially bent along the CNC axis of the isocyanide group coordinated to tungsten. For the complex containing the symmetric ligand, CNC(6)H(4)NC, the mean CNC angle for the coordinated end of the isocyanide is 139.1(11) degrees, the average W-C bond length is 1.86(1) ?, and the C&tbd1;N bond lengths have a mean value of 1.30(2) ?. These data indicate substantial back-donation from an electron-saturated tungsten atom. This is supported spectroscopically, with substantial shifts to lower wavenumbers for the C-N stretching frequencies of the coordinated isocyanide groups. Similar trends are observed in cis-(NCC(6)H(4)NC)(2)W(DPPE)(2). Both compounds contain electron-rich metals surrounded by large ligands which apparently protect the metals from atmospheric oxidation. The isocyanide ligands in both complexes contain a second coordinating group pointing away from the metal into the environment surrounding the molecules, providing the potential for polymetallic complexes containing metals in a variety of oxidation states.     

Structural isomerism of mono- and sesquiterpenoid skeletons

A generator of chemical structures (CONGEN) has been utilized to investigate two aspects of the structural isomerism of mono- and sesquiterpenoid skeletons: (1) the scope of possible isomers under various structural constraints; and (2) the scope of possible isomers based on a mechanistic model which allows interactive exploration of reactions of formation and interconversion. The possibilities, even under severe constraints, are many more than the structural types commonly encountered in natural. These results indicate the potential danger of structural assignment based in part on biogenic grounds.     

Internal rotation and pyramidal inversion in triacylphosphines

MO calculations predict a P-C rotation barrier in triformylphosphine of less than 6 kcal/mol, and an inversion barrier of ca 14 kcal/mol.     

Polymers for catalytic cation radical chemistry

Cation radical polymers which have cation radical functions at up to 5% of the poly(styrene) monomer sites have been prepared, and their effectiveness in catalyzing the cation radical Diels-Alder reaction is demonstrated.