The real solution to scalar field equation in 5D black string space

After the nontrivial quantum parameters Ω _n and quantum potentials V _n obtained in our previous research, the circumstance of a real scalar wave in the bulk is studied with the similar method of Brevik and Simonsen (Gen. Rel. Grav. 33:1839, 2001). The equation of a massless scalar field is solved numerically under the boundary conditions near the inner horizon r _e and the outer horizon r _c . Unlike the usual wave function Ψ_ωl in 4D, quantum number n introduces a new functions Ψ_{ωl n} , whose potentials are higher and wider with bigger n. Using the tangent approximation, a full boundary value problem about the Schrödinger-like equation is solved. With a convenient replacement of the 5D continuous potential by square barrier, the reflection and transmission coefficients are obtained. If extra dimension does exist and is visible at the neighborhood of black holes, the unique wave function Ψ_{ωl n} may say something to it.     

Langmuir-Blodgett self-assembly and electrochemical catalytic property of FePt magnetic nano-monolayer

Dispersed-well FePt nanoparticles with particle size ~5 nm have been prepared by hydrazine hydrate reduction of H₂PtCl₆·6H₂O and FeCl₂·4H₂O in ethanol–water system. By employing as-synthesized FePt nanoparticles, the monolayer can be formed by LB Technique. The structural, magnetic properties and electrochemical properties of FePt monolayer were respectively studied by XRD, TEM, VSM and CHI 820 electrochemical workstation. The as-synthesized particle has a chemically disordered fcc structure and can be transformed into chemically ordered fct structure after annealing treatment above 400°C. The coercivity of ordered fct FePt phase can be up to 2515Oe. CVs of 0.5 M H₂SO₄/0.5M CH₃OH on GCE modified with FePt nanoparticles monolayer films illustrate that the as-synthesized FePt is a kind of active electrochemical catalyst.     

Initial-state parton shower kinematics for NLO event generators

We are developing a consistent method to combine tree-level event generators for hadron collision interactions with those including one additional QCD radiation from the initial-state partons, based on the limited leading-log (LLL) subtraction method, aiming at an application to NLO event generators. In this method, a boundary between non-radiative and radiative processes necessarily appears at the factorization scale (μ_F). The radiation effects are simulated using a parton shower (PS) in non-radiative processes. It is therefore crucial in our method to apply a PS which well reproduces the radiation activities evaluated from the matrix-element (ME) calculations for radiative processes. The PS activity depends on the applied kinematics model. In this paper we introduce two models for our simple initial-state leading-log PS: a model similar to the ’old’ PYTHIA-PS and a p_T-prefixed model motivated by ME calculations. PS simulations employing these models are tested using W-boson production at LHC as an example. Both simulations show a smooth matching to the LLL subtracted W+1 jet simulation in the p_T distribution of W bosons, and the summed p_T spectra are stable against a variation of μ_F, despite that the p_T-prefixed PS results in an apparently harder p_T spectrum.     

Adiabatic Theorems for Quantum Resonances

We study the adiabatic time evolution of quantum resonances over time scales which are small compared to the lifetime of the resonances. We consider three typical examples of resonances: The first one is that of shape resonances corresponding, for example, to the state of a quantum-mechanical particle in a potential well whose shape changes over time scales small compared to the escape time of the particle from the well. Our approach to studying the adiabatic evolution of shape resonances is based on a precise form of the time-energy uncertainty relation and the usual adiabatic theorem in quantum mechanics. The second example concerns resonances that appear as isolated complex eigenvalues of spectrally deformed Hamiltonians, such as those encountered in the N-body Stark effect. Our approach to study such resonances is based on the Balslev-Combes theory of dilatation-analytic Hamiltonians and an adiabatic theorem for nonnormal generators of time evolution. Our third example concerns resonances arising from eigenvalues embedded in the continuous spectrum when a perturbation is turned on, such as those encountered when a small system is coupled to an infinitely extended, dispersive medium. Our approach to this class of examples is based on an extension of adiabatic theorems without a spectral gap condition. We finally comment on resonance crossings, which can be studied using the last approach.     

Evaluation of nanoparticle emission for TiO<Subscript>2</Subscript> nanopowder coating materials

In this study, nanoparticle emission of TiO₂ nanopowder coated on different substrates including wood, polymer, and tile, was evaluated in a simulation box and measured with a Scanning Mobility Particle Sizer (SMPS) for the first time. The coating process for the substrate followed the instructions given by the supply company. In the simulation box, UV light, a fan, and a rubber knife were used to simulate the sun light, wind, and human contacting conditions. Among the three selected substrates, tile coated with TiO₂ nanopowder was found to have the highest particle emission (22 #/cm³ at 55 nm) due to nanopowder separation during the simulation process. The UV light was shown to increase the release of particle below 200 nm from TiO₂ nanopowder coating materials. The results show that, under the conditions of UV lamps, a fan and scraping motion, particle number concentration or average emission rate decreases significantly after 60 and 90 min for TiO₂/polymer and TiO₂/wood, respectively. However, the emission rate continued to increase after 2 h of testing for TiO₂/tile. It is suggested that nanoparticle emission evaluation is necessary for products with nanopowder coating.     

Semileptonic B<Subscript>c</Subscript> decays and charmonium distribution amplitude

In this paper we study the semileptonic decays of the B_c meson in the light-cone sum rule (LCSR) approach. The result for each channel depends on the corresponding distribution amplitude (DA) of the final meson. For the case of B_c decaying into a pseudoscalar meson, to twist-3 accuracy only the leading twist distribution amplitude is involved if we start from a chiral current. If we choose a suitable chiral current in the vector meson case, the main twist-3 contributions are also eliminated and we can consider the leading twist contribution only. The leading twist distribution amplitudes of the charmonium and other heavy mesons are given by a model approach in a reasonable way. Employing this charmonium distribution amplitude we find a cross section that is consistent with Belle and BaBar data. Based on this model, we calculate the form factors for various B_c decay modes in the corresponding regions. Extrapolating the form factors to the whole kinetic regions, we get the decay widths and branching ratios for various B_c decay modes including their τ modes when they are kinematically accessible. PACS 13.20.He; 13.20.Fc; 11.55.Hx     

All-optical switching in silicon photonic crystal waveguides by use of the plasma dispersion effect

Silicon photonic crystals offer new ways of controlling the propagation of light as well as new tools for the realization of high-density optical integration on monolithic substrates. However, silicon does not possess the strong nonlinearities that are commonly used in the dynamic control of optical devices. Such dynamic control is nevertheless essential if silicon is to provide the higher levels of functionality that are required for optical integration. We demonstrate that the combination of the refractive index change caused by the presence of photoexcited carriers, or so-called plasma dispersion, and photonic crystal properties such as photonic bandgaps, constitutes a powerful tool for active control of light in silicon integrated devices. We show close to 100% modulation depth near the photonic crystal band edge.     

Bridgework ahead! Innovation ecosystems vis-à-vis responsible innovation

Public funding agencies largely support academic research as an effort to stimulate future product commercialization and foster broader societal benefits. Yet, translating research nurtured in academic settings into such outcomes is complex and demands functional interactions between government, academic, and industry, i.e., “triple helix,” organizations within an innovation ecosystem. This article argues that in the spirit of responsible innovation, research funding should build bridges that extend beyond the triple helix stakeholders to connect to peripheral organizations. To support that argument, evidence from agent network analysis gathered from two case studies reveals strong and weak connections, as well as gaps within innovation ecosystems in Switzerland and metropolitan Phoenix, USA. This article offers insights on how innovation ecosystems are aligned or misaligned with responsible innovation.     

A horn ridge waveguide DFB laser with reduced spatial hole burning for high-speed modulation

In this paper, we propose a DFB laser with a horn ridge waveguide (HRW) to suppress the longitudinal spatial hole burning (LSHB) effect in the lasers cavity, thus to reduce the rolloff at low frequency. The simulation result shows that HRW DFB lasers could significantly suppress the LSHB effect and its modulation bandwidth is increased by 14% comparing with the conventional straight ridge waveguide (RW) DFB lasers when the normalized coupling coefficient (κL) is 3.0. The calculated eye diagrams of HRW DFB lasers under direct 25 Gbps modulation have clearer opening than that of the conventional RW DFB lasers. These superior properties are due to the suppression of the LSHB effect by the HRW structure.