Reversible Immobilization of Urease by Using Bacterial Cellulose Nanofibers

In this work, bacterial cellulose nanofibers were produced by using the Gluconacetobacter hansenii HE1 strain. These nanofibers were derivatized with dye affinity ligand Reactive Green 5, and these newly synthesized dye-attached nanofibers were used for affinity adsorption of urease. Reactive Green 5-attached nanofibers were characterized by Fourier transform infrared spectroscopy, SEM, and energy-dispersive x-ray spectroscopy analysis. Some adsorption conditions which significantly affect the adsorption efficiency were investigated. The maximum urease adsorption capacity was found to be 240 mg/g nanofiber in pH 6.0 and at room temperature. Dye-free plain nanofibers also used for studying nonspecific urease adsorption onto plain nanofibers and nonspecific adsorption were found to be negligible (3.5 mg/g nanofiber). Prepared dye-attached nanofibers can be used in five successive adsorption/desorption steps without any decrease in their urease adsorption capacity. The desorption rate of the adsorbed urease was found to be 98.9 %. The activity of the urease was also investigated, and it was found that free and desorbed urease from the dye-attached nanofibers showed similar specific activity.     

A Novel Chronoimpedimetric Glucose Sensor in Real Blood Samples Modified by Glucose‐imprinted Pyrrole‐Aminophenylboronic Acid Modified Screen Printed Electrode

In this study, a molecularly imprinted sensor technology is engineered to detect glucose in real blood samples by chronoimpedimetrically. The imprinting process of glucose (Glc) was carried out by electrochemical polymerization of aminophenylboronic acid (APBA) and pyrrole (Py) by performing cyclic voltammetry (CV). Afterwards, glucose molecule was removed from imprinted surface by 5 % acetic acid to reveal glucose imprinted cavities. Electrochemical Impedance Spectroscopy (EIS) was used to characterize sensor modification steps and glucose removal. Glucose monitoring process was carried out chronoimpedimetrically(CI) for the first time in real blood samples. Calibration curve was prepared between 20–800 mg/dL. The standard deviations of the 18 calibration curves R² were calculated as 0.9866±0.0066 to assess reproducibility. Recovery was calculated by using 105 mg/dL Glc Serum Sample, which was monitored by auto analyzer and into this sample 50 mg/dL Glc added and our sensor response was 147.92±2.43 mg/dL, 98.6±1.62 % (n=5). Non‐imprinted (NIP) sensor gave no signal for the glucose concentration.     

Structure determination of gas-phase niobium and tantalum carbide nanocrystals via infrared spectroscopy

Niobium and tantalum carbide clusters have been isolated in the gas phase and irradiated with intense tunable infrared (IR) light. Stable neutral clusters are selectively ionized and subsequently detected in a mass spectrometer. By tuning the IR frequency, infrared multiphoton absorption spectra are obtained for a whole range of clusters. These mass-selective IR spectra lead to insights into the structures of small niobium and tantalum carbide clusters and nanocrystals.     

Microcionamides A and B, bioactive peptides from the philippine sponge Clathria (Thalysias) abietina

Microcionamides A (1) and B (2) have been isolated from the Philippine marine sponge Clathria (Thalysias) abietina. These new linear peptides are cyclized via a cystine moiety and have their C-terminus blocked by a 2-phenylethylenamine group. Their total structures, including absolute stereochemistry, were determined by a combination of spectral and chemical methods. Compound 1 was shown to slowly isomerize about the C-36/C-37 double bond when stored in DMSO. Microcionamides A (1) and B (2) exhibited significant cytotoxicity against the human breast tumor cells lines MCF-7 and SKBR-3 and displayed inhibitory activity against Mycobacterium tuberculosis H(37)Ra.     

Proton source size measurements in the eA-->e'ppX reaction

Two-proton correlations at small relative momentum q were studied in the eA(3He,4He,C,Fe)-->e(')ppX reaction at E(0)=4.46 GeV using the CLAS detector at Jefferson Lab. The enhancement of the correlation function at small q was found to be in accordance with theoretical expectations. Sizes of the emission region were extracted, and proved to be dependent on A and on the proton momentum. The size of the two-proton emission region for He was measured in eA reactions for the first time.     

Poly(p‐phenylene methylene)‐based block copolymers by mechanistic transformation

The synthesis of poly(p‐phenylene methylene) (PPM)‐based block copolymers such as poly(p‐phenylene methylene)‐b‐poly(ε‐caprolactone) and poly(p‐phenylene methylene)‐b‐polytetrahydrofuran by mechanistic transformation was described. First, precursor PPM was synthesized by acid‐catalyzed polymerization of tribenzylborate at 16 °C. Then, this polymer was used as macroinitiators in either ring‐opening polymerization of ε‐caprolactone or cationic ring‐opening polymerization of tetrahydrofuran to yield respective block copolymers. The structures of the prepolymer and block copolymers were characterized by GPC and ¹H NMR investigations. The composition of block copolymers as determined by ¹H NMR and TGA analysis was found to be in very good agreement. The thermal behavior and surface morphology of the copolymers were also investigated, respectively, by differential scanning calorimetry and atomic force microscopy measurements, and the contribution of the major soft segment has been observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

On the ionic conductivity of polymer electrolytes in terms of hole fraction

A theoretical model to interpret the conductivity of ions through polymer electrolytes is established in terms of the temperature and pressure‐dependent hole fraction computed from Simha‐Somcynsky hole theory. The model successfully linearizes the logarithm of PPG and PEG conductivity data with NaCF₃SO₃ in a 20:1 ratio for a broad range of temperature and pressure. The conductivity parameter and transmission coefficient with an additive hole fraction constant are discussed and compared for both species. The derivative of the logarithm of conductivity with respect to the hole fraction decreases inversely with the hole fraction and saturates at about 0.08 and 0.12 hole fractions for PPG and PEG, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2249–2254, 2008     

Cloning of the Orange Light‐Producing Luciferase from Photinus scintillans—A New Proposal on how Bioluminescence Color is Determined

Unlike the enchanting yellow‐green flashes of light produced on warm summer evenings by Photinus pyralis, the most common firefly species in North America, the orange lights of Photinus scintillans are infrequently observed. These Photinus species, and likely all bioluminescent beetles, use the same substrates beetle luciferin, ATP and oxygen to produce light. It is the structure of the particular luciferase enzyme that is the key to determining the color of the emitted light. We report here the molecular cloning of the P. scintillans luc gene and the expression and characterization of the corresponding novel recombinant luciferase enzyme. A comparison of the amino acid sequence with that of the highly similar P. pyralis enzyme and subsequent mutagenesis studies revealed that the single conservative amino acid change tyrosine to phenylalanine at position 255 accounted for the entire emission color difference. Additional mutagenesis and crystallographic studies were performed on a H‐bond network, which includes the position 255 residue and five other stringently conserved beetle luciferase residues, that is proximal to the substrate/emitter binding site. The results are interpreted in the context of a speculative proposal that this network is key to the understanding of bioluminescence color determination.     

Simulating listener errors in using genetic algorithms for perceptual optimization

The genetic algorithm (GA) was previously suggested for fitting hearing aid or cochlear implant features by using listener's subjective judgment. In the present study, two human factors that might affect the outcome of the GA when used for perceptual optimization were explored with simulations. Listeners with varying sensitivity in discriminating sentences of different intelligibility and with varying error rates in entering their judgment to the GA were simulated. A comparison of the simulation results with the results from human subjects reported by Ba?kent et al. Ear Hear. 28(3) 277-289 (2007) showed that these factors could reduce the performance of the GA considerably.     

Forced Folding of a Disordered Protein Accesses an Alternative Folding Landscape

Intrinsically disordered proteins (IDPs) are involved in diverse cellular functions. Many IDPs can interact with multiple binding partners, resulting in their folding into alternative ligand‐specific functional structures. For such multi‐structural IDPs, a key question is whether these multiple structures are fully encoded in the protein sequence, as is the case in many globular proteins. To answer this question, here we employed a combination of single‐molecule and ensemble techniques to compare ligand‐induced and osmolyte‐forced folding of α‐synuclein. Our results reveal context‐dependent modulation of the protein′s folding landscape, suggesting that the codes for the protein′s native folds are partially encoded in its primary sequence, and are completed only upon interaction with binding partners. Our findings suggest a critical role for cellular interactions in expanding the repertoire of folds and functions available to disordered proteins.