Fluorescence spectroscopy for monitoring deterioration of extra virgin olive oil during heating

The potential of fluorescence spectroscopy for characterizing the deterioration of extra virgin olive oil (EVOO) during heating was investigated. Two commercial EVOO were analysed by HPLC to determine changes in EVOO vitamin E and polyphenols as a result of heating at 170°C for 3 h. This thermal oxidation of EVOO caused an exponential decrease in hydroxytyrosol and vitamin E (R²=0.90 and 0.93, respectively) whereas the tyrosol content was relatively stable. At the same time, amounts of preformed hydroperoxides (ROOH), analysed by an indirect colorimetric method, decreased exponentially during the heating process (R²=0.94), as a result of their degradation into secondary peroxidation products. Fluorescence excitation spectra with emission at 330 and 450 nm were recorded to monitor polyphenols and vitamin E evolution and ROOH degradation, respectively. Partial least-squares calibration models were built to predict these indicators of EVOO quality from oil fluorescence spectra. A global approach was then proposed to monitor the heat charge from the overall fluorescence fingerprint. Different data pretreatment methods were tested. This study indicates that fluorescence spectroscopy is a promising, rapid, and cost-effective approach for evaluating the quality of heat-treated EVOO, and is an alternative to time-consuming conventional analyses. In future work, calibration models will be developed using a wide range of EVOO samples.     

Synthesis and properties of amphiphilic vinyl acetate triblock copolymers prepared by copper mediated living radical polymerisation

Polymerisation of vinyl acetate by conventional free radical polymerisation using a diazo initiator followed by copper mediated living radical polymerisation with a range of monomers was studied. This method led to the synthesis of triblock copolymers. We have thus successfully prepared several new ABA triblock copolymers where B is poly(vinyl acetate) and A is (dimethylamino)ethyl methacrylate (DMAEMA), (polyethylene glycol) methyl ether methacrylate (MeO(PEG)MA) or solketal methacrylate (SMA). The sequential conventional/living radical polymerisation approach provided an efficient route to synthesis of new block copolymers. The properties of these amphiphilic polymers have been subsequently investigated by ¹H NMR, fluorescence spectroscopy, tensiometry and dynamic light scattering to investigate their behaviour as potential surfactants.     

Collective behavior of Franck-Condon excited states and energy transfer in DNA double helices

Absorption of UV radiation by DNA bases is known to induce carcinogenic mutations. The lesion distribution depends on the sequence around the hotspots, suggesting cooperativity between bases. Here we show that such cooperativity may intervene at the very first step of a cascade of events by formation of Franck-Condon states delocalized over several bases and subsequent energy transfer faster than 100 fs. Our study focuses on the double helix poly(dA).poly(dT), whose fluorescence, induced by femtosecond pulses at 267 nm, is probed by the upconversion technique and time-correlated single photon counting, over a large time domain (100 fs to 100 ns). The time-resolved fluorescence decays and fluorescence anisotropy decays are discussed in relation with the steady-state absorption and fluorescence spectra in the frame of exciton theory.     

Preparation of Protected β2‐ and β3‐Homocysteine, β2‐ and β3‐Homohistidine,and β2‐Homoserine for Solid‐Phase Syntheses

The Ser, Cys, and His side chains play decisive roles in the syntheses, structures, and functions of proteins and enzymes. For our structural and biomedical investigations of β‐peptides consisting of amino acids with proteinogenic side chains, we needed to have reliable preparative access to the title compounds. The two β³‐homoamino acid derivatives were obtained by Arndt–Eistert methodology from Boc‐His(Ts)‐OH and Fmoc‐Cys(PMB)‐OH (Schemes 2–4), with the side‐chain functional groups' reactivities requiring special precautions. The β²‐homoamino acids were prepared with the help of the chiral oxazolidinone auxiliary DIOZ by diastereoselective aldol additions of suitable Ti‐enolates to formaldehyde (generated in situ from trioxane) and subsequent functional‐group manipulations. These include OH→O^tBu etherification (for β²hSer; Schemes 5 and 6), OH→STrt replacement (for β²hCys; Scheme 7), and CH₂OH→CH₂N₃→CH₂NH₂ transformations (for β²hHis; Schemes 9–11). Including protection/deprotection/re‐protection reactions, it takes up to ten steps to obtain the enantiomerically pure target compounds from commercial precursors. Unsuccessful approaches, pitfalls, and optimization procedures are also discussed. The final products and the intermediate compounds are fully characterized by retention times (t_R), melting points, optical rotations, HPLC on chiral columns, IR, ¹H‐ and ¹³C‐NMR spectroscopy, mass spectrometry, elemental analyses, and (in some cases) by X‐ray crystal‐structure analysis.     

Additivity of forward masking

Masked thresholds for a 1000-Hz sinusoidal signal were measured as a function of masker level in both forward and simultaneous masking for two types of maskers: a 1000-Hz sinusoid and a narrowband noise, 60-Hz wide, centered at 1000 Hz. In forward masking, the noise masker produced much steeper growth-of-masking functions than the sinusoid. Presenting a contralateral broadband noise "cue" with the forward masker dramatically reduced the slope of masking for the noise masker but did not influence results for the sinusoidal masker. The noise remained the more effective masker. The amount of masking produced by combinations of equally effective narrowband-noise and sinusoidal maskers was compared to that produced by each masker individually with and without the contralateral cue. No additional masking beyond that predicted by energy summation was measured for forward masking. Additional masking beyond energy-sum predictions was measured for analogous conditions in simultaneous masking. Comparisons of results obtained with and without the contralateral cue suggest that signal thresholds in the presence of narrowband-noise forward maskers can reflect nonperipheral auditory processes.     

A New Total Synthesis of D-threo-L-talo-Octose

A new approach to the total, asymmetric synthesis of D -threo-L -talo-octose ((?)- 1 ) and its derivatives is presented. It is based on the chemoselective Wittig-Horner monoolefination of a 5-deoxy-D -ribo-hexodialdose derivative 4 obtained by selective reduction of (?)-5-deoxy-2.3-O-isopropylidene-/β-D -ribo-hexofuranurono-6,1-lactone ((?)- 3 ). Allylic bromination of the resulting methyl (E)-oct-6-enofuranuronate (+)- 5 followed by intramolecular nucleophilic displacement of the so-obtained bromides gave a 13.3:1 mixture of (?)-methyl (E)-l,4-anhydro-6,7-dideoxy-2,3-O-isopropylidene-β-L -talo-oct-6-enopyranuronate ((?)- 8 ) and methyl (E)-l,4-anhydro-6,7-dideoxy-2,3-O-isopropylidene-α-D -allo-oct-6-enopyranuronate ( 9 ). The double hydroxylation of the enoate (?)- 8 followed Kishi's rule and gave the corresponding D -threo-β-L -talo-octopyranuronate derivative (?)- 11 with a good diastereoselectivity. Reduction of ester (?)- 11 and deprotection led to pure (?)- 1 .     

Characterization of surfactant complex mixtures using Raman spectroscopy and signal extraction methods: Application to laundry detergent deformulation

This paper presents the analysis of surfactants in complex mixtures using Raman spectroscopy combined with signal extraction (SE) methods. Surfactants are the most important component in laundry detergents. Both their identification and quantification are required for quality control and regulation purposes. Several synthetic mixtures of four surfactants contained in an Ecolabel laundry detergent were prepared and analyzed by Raman spectroscopy. SE methods, Independent Component Analysis and Multivariate Curve Resolution, were then applied to spectral data for surfactant identification and quantification. The influence of several pre-processing treatments (normalization, baseline correction, scatter correction and smoothing) on SE performances were evaluated by experimental design. By using optimal pre-processing strategy, SE methods allowed satisfactorily both identifying and quantifying the four surfactants. When applied to the pre-processed Raman spectrum of the Ecolabel laundry detergent sample, SE models remained robust enough to predict the surfactant concentrations with sufficient precision for deformulation purpose. Comparatively, a supervised modeling technique (PLS regression) was very efficient to quantify the four surfactants in synthetic mixtures but appeared less effective than SE methods when applied to the Raman spectrum of the detergent sample. PLS seemed too sensitive to the other components contained in the laundry detergent while SE methods were more robust. The results obtained demonstrated the interest of SE methods in the context of deformulation.     

Asymmetric Carboxycyanation of Aldehydes by Cooperative AlF/Onium Salt Catalysts: from Cyanoformate to KCN as Cyanide Source

Asymmetric 1,2-additions of cyanide yield enantioenriched cyanohydrins as versatile chiral building blocks. Next to HCN, volatile organic cyanide sources are usually used. Among them, cyanoformates are more attractive on technical scale than TMSCN for cost reasons, but catalytic productivity is usually lower. Here, the development of a new strategy for cyanations is described, in which this activity disadvantage is overcome. A Lewis acidic Al center cooperates with an aprotic onium moiety within a remarkably robust bifunctional Al–F–salen complex. This allowed for unprecedented turnover numbers of up to 10⁴. DFT studies suggest an unexpected unique trimolecular pathway in which the ammonium bound cyanide attacks the aldehyde, which itself is activated by the carbonyl group of the cyanoformate binding to the Al center. In addition, a novel practical carboxycyanation method was developed that makes use of KCN as the sole cyanide source. The use of a pyrocarbonate as carboxylating reagent provided the best results.