Wood elastic characterization from a single sample by resonant ultrasound spectroscopy

The goal of this paper is to propose an experimental method allowing the identification of the complete elastic tensor of anisotropic biological materials such as wood using only one sample. To do so, two complementary methods are used. First, the wood eigen-directions are defined from a sample of spherical shape that is then cut into a cube in a way to perform resonant ultrasound spectroscopy (RUS). The method is successfully applied on a reference beech sample with known orthotropic directions. A comparison of the identified elastic constants with those from the literature and some inferred from ultrasonic transmission measurements is given.     

Contribution to the research on cellulose diacetate as a solid state track detector

Abstract

While having a similar composition to Cellulose Triacetate, Cellulose Diacetate is a less sensible heavy ions detector. With a 0.9 N potash etching at 20°C, ions which have higher Z than Carbon are not recorded and the Etch Rate Ratio is about 1 to 2 for Cu and Kr ions. The study of the infrared absorption spectra shows a decrease of the v(O-H) band intensity at 3500 cm^?1 for CDA, when it increases for CTA.     

Invariant Mass Spectroscopy of 23O via the (p, p′) Reaction in Inverse Kinematics

The neutron-rich oxygen isotope ²³O has been investigated via proton inelastic scattering on a liquid hydrogen target at 63.5 MeV/nucleon. The invariant mass method in inverse kinematics was employed to reconstruct the energy spectrum. A sharp resonance state was observed at 42(5) keV above the neutron threshold. A comparison of the differential cross section leading to this state with a microscopic DWBA calculation allowed a J ^π assignment of 5/2⁺ for this state.     

Between Ni(mnt)2 and Ni(tfd)2 dithiolene complexes: the unsymmetrical 2-(trifluoromethyl)acrylonitrile-1,2-dithiolate and its nickel complexes

A novel 1,2-dithiolate ligand, that is, the 2-(trifluoromethyl)acrylonitrile-1,2-dithiolate, abbreviated here as tfadt, is prepared from the corresponding cyclic dithiocarbonate. This ligand, substituted with both a CN and a CF(3) group, is compared with the well-known maleonitrile- and bis(trifluoromethyl)ethane-1,2-dithiolates. The preparation, electrochemical properties, and X-ray crystal structures of the square-planar nickel complexes, in both their dianionic diamagnetic [Ni(tfadt)(2)](2)(-) and their monoanionic paramagnetic [Ni(tfadt)(2)](*)(-) forms, are reported, as n-Bu(4)N(+), PPh(4)(+), and (18-crown-6)Na(+) salts, respectively. In the [(18-crown-6)Na](2)[Ni(tfadt)(2)] salt, each CN moiety of the [Ni(tfadt)(2)](2)(-) dianion is coordinated to a (18-crown-6)Na(+) cation through a CN...Na interaction [N...Na = 2.481(3) A], affording an "axle with wheels" model where two MeOH molecules act as axle caps. On the other hand, in [(18-crown-6)Na][Ni(tfadt)(2)], each (18-crown-6)Na(+) cation is coordinated on both sides by the CN groups of two monoanionic [Ni(tfadt)(2)](*)(-) complexes with N...Na(+) distances at 2.434(5) and 2.485(4) A, giving rise to heterobimetallic chains with alternating (18-crown-6)Na(+) and [Ni(tfadt)(2)](*)(-) ions. These two examples demonstrate the attractive ability of the CN moieties in the [Ni(tfadt)(2)](2)(-)(,)(*)(-) complexes to coordinate metallic cationic centers. The paramagnetic salts of the anionic [Ni(tfadt)(2)](*)(-) complex follow Curie-type law in the 2-300 K temperature range, indicating the absence of intermolecular magnetic interactions in the solid state. The complexes are found in their trans form in all crystal structures, while density functional theory calculations establish that both forms have essentially the same energy. A cis-trans interconversion process is observed by variable-temperature NMR on the dianionic [Ni(tfadt)(2)](2)(-) complex with a coalescence temperature T(c) of 260 K and a free energy of activation of 51-53 kJ mol(-)(1).     

f-State occupancy at the gamma-alpha phase transition of Ce-Th and Ce-Sc alloys

Resonant inelastic x-ray scattering spectra were measured for a series of Ce solid solutions (Ce-Th and Ce-Sc) across the gamma-alpha phase transition. They reveal a well-defined feature associated with the 4f2 configuration when the incident energy is tuned to the Ce L3 preedge region. This component is normally hidden in x-ray absorption spectra because of lifetime broadening. The f1/f2 ratio estimated by resonant inelastic x-ray scattering presents a sharp drop across the gamma-alpha transition and hysteresis as a function of temperature that closely resemble the magnetization loop. These measurements confirm recent dynamical mean-field theory calculations that unexpectedly predict significant double occupancy of f orbitals in the ground state.     

Crown-annelated oligothiophenes as model compounds for molecular actuation

Crown-annelated quater- (4T) and sexithiophenes (6T) with oligooxyethylene chains of various lengths attached at the 3-positions of the terminal thiophene rings have been synthesized. Analysis of the cation-binding properties of the macrocycles by (1)H NMR and UV-vis spectroscopy reveals the formation of a 1:1 complex with Ba(2+), Sr(2+), or Pb(2+) and shows that cation complexation results in a conformational transition in the pi-conjugated system. Theoretical analysis of this process by density functional methods predicts that this conformational transition results in a narrowing of the highest occupied-lowest unoccupied molecular orbital gap of the conjugated system with a decrease of the redox potentials (E(0)(1) and E(0)(2)) associated with the formation of the 4T cation radical and dication. Cyclic voltammetry shows that, depending on the binding constant, the presence of metal cation produces a negative or a positive shift of E(0)(1) while E(0)(2) always shifts negatively. This unusual behavior is discussed in terms of interplay between electrostatic interactions and conformational changes associated with cation binding.     

Etude cinétique des effets de fluence énergétique,de débit de fluence,et d'effacement induits par des ions lourds et des photons γ dans le triacétate de cellulose

The kinetic interpretation of the damage produced by heavy ions (Kr and Cl from 1 MeV/amu) and γ radiation in cellulose triacetate leads to an exponential dependence on the ion fluence. A comparison of the fading effect produced by heavy ions and γ rays shows that the heavy ions, unlike γ rays, cause irreversible damage. Finally, a nonlinear dependence on the flux of ions and γ rays is found in the kinetics of radiation damage. This result is contrary to the usual assumption that heavy-ion flux, like γ-ray flux, is additive, at least for the fluxes of 10⁹?2 × 10¹⁰ ions/cm²s and dose rates of 10³–10⁴ Gy/h used in this work.     

Electrochromatography in poly(dimethyl)siloxane microchips using organic monolithic stationary phases

This paper shows the in situ synthesis of an hexyl acrylate monolith in PDMS microfluidic devices and its subsequent use as stationary phase for electrochromatography on chip. To overcome the ability of PDMS material to absorb organic monomers, surface modification of the enclosed channels was realized by UV-mediated graft polymerization. This grafting procedure is based on the preliminary adsorption of a photoinitiator onto the PDMS surface and polymerization of charged monomers. Next, hexyl acrylate monoliths were cast in situ using photopolymerization process. The chromatographic behavior of the monolithic column was confirmed by the successful separation of derivatized catecholamines in the PDMS device using a 30 mm effective separation length (100 microm x 100 microm section). Efficiencies reached up to 200,000 plates per meter.     

Optimization of in-situ monolithic synthesis for immunopreconcentration in capillary

Poly(glycidyl methacrylate-co-ethylene dimethacrylate) monoliths have been synthetized in fused-silica capillary. The monomer mixture composition, initiation mode and porogen composition were optimized in order to provide a monolith with an homogeneous morphology and able to generate an electroosmotic flow via the incorporation of a small percentage of monomers possessing sulfonate group. Anti-ochratoxin A antibodies were immobilized through a single step on the epoxy groups leading to a miniaturized immunoextraction column. In order to evaluate the specificity of the analyte-antigen interaction on this immunosorbent, the retention of ochratoxin A was examined on this support but also on two complementary sorbents: one constituted by the non-bonded monolith and another one bonded with non-specific antibodies. Only the monolith bonded with anti-ochratoxin A antibodies lead to retention, showing the specificity of the interactions involved. This affinity phase based on a monolithic polymer support exhibits a high potential for specific preconcentration of small molecules.