Group motions in the glassy state of some substituted polystyrenes and poly(vinyl benzoates)

Mechanical damping measurements were carried out in the range of 10³–10⁵ cps and between 60°K. and the softening point on some substituted Polystyrenes and poly(vinyl benzoates) containing different substituents (methyl groups, methoxy groups, and halogen atoms) either in the ring or in the main chain. The ortho and meta ring-substituted polystyrenes do not show any secondary mechanical relaxation in the glassy state, although all the other substituted polystyrenes, exhibit a low-temperature damping peak (δ process) (which is in some way connected with ring motions) whose height and temperature location depend on nature, position, and number of substituents. Substituents in the para position of the ring or in the α position in the backbone chain shift the δ peak of the unsubstituted polystyrene towards higher temperatures; this shift is accompanied by an increase of the apparent activation energy E^*. Substitution in the β position, on the contrary, does not affect the δ peak. Analogous results are obtained for substituted poly(vinyl benzoates), which exhibit, in addition, a β relaxation effect, associated with carboxyl group motions. A very good correlation is found between the values of E* and the limiting relaxation time τ for the δ relaxation of polystyrenes and poly(vinyl benzoates), similarly substituted in the ring, indicating that the δ relaxation leads to absorption curves in the mechanical relaxation spectrum which are characteristic of the structure of the aromatic side chain.     

Practical synthesis of unsymmetrical ureas from isopropenyl carbamates

A very convenient method for the synthesis of unsymmetrical ureas is described, based on isopropenyl carbamates. The synthetic efficiency of traditional methods for urea formation, such as use of phosgene or alkyl and aryl carbamates, is limited by the formation of symmetrical urea side products or reaction reversibility. Isopropenyl carbamates react with amines cleanly and irreversibly and give unsymmetrical ureas in high yield and purity. This method is ideal for the rapid synthesis of compound libraries.     

Heat of dilution of monomethylurea in aqueous solutions at 25°C

The enthalpies of dilution of monomethylurea were determined by a flow microcalorimeter at 25°C. The data were combined with osmotic data to give the thermodynamic excess functions. The behavior of monomethylurea is compared to that of urea and other alkylureas, alkylamides, etc. in water. Enthalpy predominates at low concentrations, and entropy at higher concentrations. Hence monomethylurea falls within the group of substances whose behavior, according to Rowlinson, is “not peculiar in water”, for m<1. On the other hand, it must be considered a “peculiar aqueous” solute, for m>1. An analysis of the sign of the virial coefficients of the excess thermodynamic functions shows that the properties of MMU in solution are particular. These properties are briefly discussed on the basis of models proposed by Friedman and Krishnan for the aqueous solutions of predominantly hydrophobic solutes and by Frank and Franks for aqueous solutions of urea. Some preliminary data were presented at the International Conference on Chemical Thermodynamics held in Montpellier, 1975.     

Photocatalytic degradation of actual textile industrial wastewater in aqueous suspensions of polycrystalline TiO2

Heterogeneous photocatalytic oxidation of contaminants present in wastewater produced by a textile industry was carried out. The samples were withdrawn from the plant before and after a traditional biological treatment. The effluents were named A and A' (before the biological treatment), B and B' (after the biological treatment). Polycrystalline TiO2 (Degussa P25) was used as the catalyst in a batch photoreactor with immersed lamp. An almost complete decolorization was observed after about 0.5 divided by 1 hours for both kinds of effluents, but the decrease of the total organic carbon (TOC) concentration occurred more slowly. The influence of some chemical oxidants, i.e. ozone, hydrogen peroxide and peroxydisulfate on the photo-oxidation rate was also investigated. After addition of H2O2 or S2O8(2-) TOC decreased more quickly only for B and B'. The runs performed by using O3 as bubbling gas showed a mineralization rate higher than that observed in the presence of O2.     

Chiral recognition in aqueous solutions: On the role of urea in hydrophilic and hydrophobic interactions of unsubstituted α-amino acids

Calorimetric and nuclear relaxation time measurements were carried out at 25°C on concentrated aqueous solutions of urea containing the L and D forms of the following -aminoacids: alanine, -aminobutyric acid, norvaline, and norleucine. Glycine was also studied under the same experimental conditions. The enthalpic interaction coefficients were rationalized according to the preferential configuration model. The trends of the homochiral coefficients at increasing concentration of urea underline an interaction mechanism not different from that occurring in water. Chiral recognition is the quantity more affected by the nature of the solvent. Among the amino acids studied, only norleucine presents this effect, which vanishes at the highest concentrations of urea because the attenuated electrostatic interactions cannot impose preferential configurations.     

Elemental Bromine Production by TiO2 Photocatalysis and/or Ozonation

Significant production of elemental bromine (Br₂) was observed for the first time when treating bromide containing solutions at acidic pH, with TiO₂ photocatalyst, ozone, or a combination thereof. Br₂ selectivities up to approximately 85 % were obtained and the corresponding bromine mass balance values satisfied. The process is general and may be applied at a laboratory scale for green bromination reactions, or industrially as a cheap, safe, and environmentally sustainable alternative to the currently applied bromine production methods.     

Metal-Promoted Heterocyclization: A Heterosynthetic Approach to Face a Pandemic Crisis

The outbreak of SARS-CoV-2 has drastically changed our everyday life and the life of scientists from all over the world. In the last year, the scientific community has faced this worldwide threat using any tool available in order to find an effective response. The recent formulation, production, and ongoing administration of vaccines represent a starting point in the battle against SARS-CoV-2, but they cannot be the only aid available. In this regard, the use of drugs capable to mitigate and fight the virus is a crucial aspect of the pharmacological strategy. Among the plethora of approved drugs, a consistent element is a heterocyclic framework inside its skeleton. Heterocycles have played a pivotal role for decades in the pharmaceutical industry due to their high bioactivity derived from anticancer, antiviral, and anti-inflammatory capabilities. In this context, the development of new performing and sustainable synthetic strategies to obtain heterocyclic molecules has become a key focus of scientists. In this review, we present the recent trends in metal-promoted heterocyclization, and we focus our attention on the construction of heterocycles associated with the skeleton of drugs targeting SARS-CoV-2 coronavirus.