Folate-targeted optical and magnetic resonance dualmodality PCL-<Emphasis Type="Italic">b</Emphasis>-PEG micelles for tumor imaging

A biodegradable tumor targeting nano-probe based on poly（ε-caprolactone）-b-poly（ethylene glycol）block copolymer（PCL-b-PEG）micelle functionalized with a magnetic resonance imaging（MRI）contrast agent diethylenetriaminepentaacetic acid-gadolinium(DTPA-Gd³⁺)on the shell and a near-infrared（NIR）dye in the core for magnetic resonance and optical dual-modality imaging was prepared.The longitudinal relaxivity（r₁）of the PCL-b-PEG-DTPA -Gd³⁺micelle was 13.4（mmol/L）^-1s^-1,three folds of that of DTPA-Gd³⁺,and higher than that of many polymeric contrast agents with similar structures.The in vivo optical imaging of a nude mouse bearing xenografted breast tumor showed that the dual-modality micelle preferentially accumulated in the tumor via the folic acid-mediated active targeting and the passive accumulation by the enhanced permeability and retention（EPR）effect.The results indicated that the dualmodality micelle is a promising nano-probe for cancer detection and diagnosis.     

Synthesis and photovoltaic properties of alternating conjugated polymers derived from indolo[3,2-<Emphasis Type="Italic">b</Emphasis>]carbazole and thiophene/thieno[3,2-<Emphasis Type="Italic">b</Emphasis>]thiophene-cored benzoselenadiazole

Two alternating narrow band gap (NBG) copolymers derived from 5,11-di(N-9-heptadecanyl)-indolo[3,2-b]carbazole (ICZ) and 4,7-di(thien-2-yl)-2′,1′,3′-benzoselenadiazole (DSeBT) or 4,7-di(thieno[3,2-b]thien-2-yl)-2′,1′,3′-benzoselenadiazole (DTSeBT), were synthesized and named PICZ-DSeBT and PICZ-DTSeBT, respectively. The PICZ-DSeBT shows good solubility in common organic solvent, and the PICZ-DTSeBT is soluble in hot o-dichlorobenzene (ODCB) and not good soluble in chloroform, toluene etc. The chemical structure, molecular weight and fundamental physical properties of the copolymers were characterized by ¹H NMR, gel permeation chromatography (GPC), cyclic voltammetry (CV), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) etc. Potential application of the copolymers to be employed as electron donor material and PC61BM ([6,6]-phenyl-C₆₁ butyric acid methyl ester) for photovoltaic solar cells (PSCs), were investigated. PSCs based on the blends of PICZ-DSeBT/PC₆₁BM (w: w; 1: 2) or PICZ-DTSeBT/PC₆₁BM (w: w; 1: 2) with devices configuration as ITO/PEDOT: PSS/blend/Al, show the power conversion efficiencies (PCEs) of 1.06% and 1.52%, with the open circuit voltage (V _oc) of 0.75 V and 0.70 V, short circuit current densities (J _sc) of 3.45 mA/cm² and 5.30 mA/cm² under an AM1.5 simulator (100 mW/cm²) and the photocurrent response on-set wavelength extending up to 760 nm and 800 nm, respectively. It indicates that the NBG copolymers are viable electron donor materials for PSCs.     

‘Fixed charge’ chemical derivatization and data dependant multistage tandem mass spectrometry for mapping protein surface residue accessibility

Protein surface accessible residues play an important role in protein folding, protein-protein interactions and protein-ligand binding. However, a common problem associated with the use of selective chemical labeling methods for mapping protein solvent accessible residues is that when a complicated peptide mixture resulting from a large protein or protein complex is analyzed, the modified peptides may be difficult to identify and characterize amongst the largely unmodified peptide population (i.e., the ‘needle in a haystack’ problem). To address this challenge, we describe here the development of a strategy involving the synthesis and application of a novel ‘fixed charge’ sulfonium ion containing lysine-specific protein modification reagent, S,S′-dimethylthiobutanoylhydroxysuccinimide ester (DMBNHS), coupled with capillary HPLC-ESI-MS, automated CID-MS/MS, and data-dependant neutral loss mode MS³ in an ion trap mass spectrometer, to map the surface accessible lysine residues in a small model protein, cellular retinoic acid binding protein II (CRABP II). After reaction with different reagent:protein ratios and digestion with Glu-C, modified peptides are selectively identified and the number of modifications within each peptide are determined by CID-MS/MS, via the exclusive neutral loss(es) of dimethylsulfide, independently of the amino acid composition and precursor ion charge state (i.e., proton mobility) of the peptide. The observation of these characteristic neutral losses are then used to automatically ‘trigger’ the acquisition of an MS³ spectrum to allow the peptide sequence and the site(s) of modification to be characterized. Using this approach, the experimentally determined relative solvent accessibilities of the lysine residues were found to show good agreement with the known solution structure of CRABP II.     

Biosynthesis of Indigo Dye by Newly Isolated Naphthalene-Degrading Strain <Emphasis Type="Italic">Pseudomonas s</Emphasis>p. HOB1 and its Application in Dyeing Cotton Fabric

Indigo is one of the oldest dyes manufactured chemically and is mostly used in textile, food, and pharmaceutical industries. However, owing to the environmental hazards posed by the chemical production, the present scenario in the field stipulates a biosynthesis alternative for indigo production. The present study describes an indigenously isolated naphthalene-degrading strain Pseudomonas sp. HOB1 producing a blue pigment when indole was added in the growth medium. This blue pigment was analyzed by high-pressure thin-layer chromatography and other spectroscopic techniques which revealed it to be the indigo dye. Pseudomonas sp. HOB1 showed ability to produce 246 mg indigo liter⁻¹ of the medium. The K _m for the enzyme naphthalene dioxygenase which is involved in indigo formation is 0.3 mM, and V _max was as high as 50 nmol min⁻¹ mg dry biomass⁻¹. The bacterial indigo dye was further successfully applied for dyeing cotton fabrics. The high indigo productivity of Pseudomonas sp. HOB1 using naphthalene as growth substrate and its applicability on cotton fabrics, therefore, stems the probability of using this culture for commercial indigo production.     

Optically transparent superhydrophobic TEOS-derived silica films by surface silylation method

Optically transparent silica films were prepared at room temperature (~27°C) by keeping the molar ratio of TEOS:MeOH:H₂O (0.001 M NH₄F) constant at 1:19.29:6.20, respectively. A surface chemical modification of the films was done with alkylchlorosilanes at different concentrations from 0 to 1 vol. % and aging times varied from half to 2 h. The DMCS and TMCS surface modified silica films showed the static water contact angle of 146° and 162°, respectively. When the DMCS and TMCS modified films were cured at temperatures higher than 240 and 275°C, respectively, the films became superhydrophilic. Further, the humidity study was carried out at a relative humidity of 90% at 30°C temperature over 60 days. We characterized the water repellent silica films by Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, % of optical transmission, humidity tests and contact angle measurements.     

Single-Chain Fv Antibody Fragments Retain Binding Properties of the Monoclonal Antibody Raised Against Peptide P1 of the Human Prion Protein

Prion diseases are incurable neurodegenerative diseases that affect both humans and animals. The infectious agent is a pathogenic form of the prion protein that accumulates in brain as amyloids. Currently, there is neither cure nor reliable preclinical diagnostics on the market available. The growing number of reports shows that passive immunisation is one of the most promising strategies for prion disease therapy, where antibodies against prions may prevent and even cure the infection. Since antibodies are large molecules and, thus, might not be suitable for the therapy, different antibody fragments are a good alternative. Therefore, we have designed and prepared single-chain antibody fragments (scFvs) derived from the PrP^Sc-specific murine monoclonal antibody V5B2. Using a new expression vector pMD204, we produced scFvs in two opposing chain orientations in the periplasm of Escherichia coli. Both recombinant antibody fragments retained the specificity of the parent antibody and one of these exhibited binding properties comparable to the corresponding murine Fab fragments with the affinity in nM range. Our monovalent antibody fragments are of special interest in view of possible therapeutic reagents for prion diseases as well as for development of a new generation of diagnostics.     

DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils

Suspensions of commercial refined beech pulp (RBP) were further processed through mechanical disintegration (MD-RBP), chemical modification (CM-RBP) and through chemical modification followed by mechanical disintegration (CM-MD-RBP). Nanocomposites were prepared by compounding a poly(vinyl acetate) (PVAc) latex adhesive with increasing contents of the different types of nanofibrils, and the resulting nanocomposites were analyzed by dynamic mechanical analysis (DMA). Also, the suitability of using the CM-RBP fibrils to formulate PVAc adhesives for wood bonded assemblies with improved heat resistance was studied. The presence of cellulose nanofibrils had a strong influence on the viscoelastic properties of PVAc latex films. For all nanocomposites, increasing amounts of cellulose nanofibrils (treated or untreated) led to increasing reinforcing effects in the glassy state, but especially in the PVAc and PVOH glass transitions. This reinforcement primarily resulted from interactions between the cellulose fibrils network and the hydrophilic PVOH matrix that led to the complete disappearance of the PVOH glass transition (tan δ peak) for some fibril types and contents. At any given concentration in the PVOH transition, the CM-MD-RBP nanofibrils provided the highest reinforcement, followed by the MD-RBP, CM-RBP and the untreated RBP. Finally, the use of the CM-RBP fibrils to prepare PVAc reinforced adhesives for wood bonding was promising since, even though they generally performed worse in dry and wet conditions, the boards showed superior heat resistance (EN 14257) and passed the test for durability class D1.     

1,7′-dimethyl-2′-propyl-1<Emphasis Type="Italic">H</Emphasis>,3′<Emphasis Type="Italic">H</Emphasis>-2,5′-bibenzo[<Emphasis Type="Italic">d</Emphasis>]imidazole as a corrosion inhibitor of mild steel in 1 M HCl

Inhibition effect of imidazole derivative 1,7′-dimethyl-2′-propyl-1H,3′H-2,5′-bibenzo[d]imidazole (DPBI) against mild steel corrosion in 1 M HCl solutions was evaluated using the conventional mass loss method, potentiodynamic polarization, linear polarization, and electrochemical impedance spectroscopy. The mass loss results showed that DPBI is an excellent corrosion inhibitor; electrochemical polarizations data revealed the mixed mode of inhibition; and the results of electrochemical impedance spectroscopy showed that the change in the impedance parameters, charge transfer resistance, and double layer capacitance with the change in the concentration of the inhibitor is due to the adsorption of the molecule leading to the formation of a protective layer on the surface of mild steel. The inhibition action of this compound was assumed to occur via adsorption on the steel surface through the active centers of the molecule.     

Synthesis of a fluorescein–porphyrin hybrid and its supramolecular self-assembly with amino-porphyrinatocopper(II) by hydrogen bonding

A fluorescein–porphyrin hybrid (Fl-PTPP) has been synthesized and characterized by UV/Vis, IR, ¹H NMR, ES-MS and elemental analysis. The supramolecular self-assembly of Fl-PTPP with the copper(II) complex of 5-(p-amino-phenyl)-10,15,20-triphenylporphyrin, (CuAPTPP), by hydoxyl-amino type hydrogen bonding was studied using vapor pressure osmometry (VPO) measurements, ES-MS, UV/Vis, ¹H NMR and fluorescence spectroscopic titration. The data indicate formation of a (Fl-PTPP)–CuAPTPP supramolecular complex. Fluorescence strengthening character was observed in a spectroscopic titration experiment for the Fl-PTPP/CuAPTPP system. The association constant of the supramolecular complex was calculated from the fluorescence titration data, and found to be less than that of a carboxyl–carboxyl type hydrogen-bonding system.     

Computational modelling of amperometric biosensors in the case of substrate and product inhibition

In this paper the response of an amperometric biosensor at mixed enzyme kinetics and diffusion limitations is modelled in the case of the substrate and the product inhibition. The model is based on non-stationary reaction–diffusion equations containing a non-linear term related to non-Michaelis–Menten kinetics of an enzymatic reaction. A numerical simulation was carried out using a finite difference technique. The complex enzyme kinetics produced different calibration curves for the response at the transition and the steady-state. The biosensor operation is analysed with a special emphasis to the conditions at which the biosensor response change shows a maximal value. The dependence of the biosensor sensitivity on the biosensor configuration is also investigated. Results of the simulation are compared with known analytical results and with previously conducted researches on the biosensors.