Permanently oriented antibody immobilization for digoxin determination with a flow-through fluoroimmunosensor

This paper reports a new flow-through fluoroimmunosensor, the function of which is based on antibodies immobilized on an inmunoreactor of controlled-pore glass (CPG), for determination of digoxin, used in the treatment of congestive heart failure and artery disease. The immunosensor has a detection limit of 1.20 microg L(-1) and provides high reproducibility (RSD=4.5% for a concentration of 0.0025 mg L(-1), and RSD=6.7% for 0.01 mg L(-1)). The optimum working concentration range was found to be 1.2 x 10(-3)-4.0 x 10(-2) mg L(-1). The lifetime of the immunosensor was about 50 immunoassays; if stored unused its lifetime can be extended to three months. A sample speed of about 10-12 samples per hour can be attained. Possible interference from substances with structures similar to digoxin (morphine, heroin, tebaine, codeine, pentazocine and narcotine) was investigated. No cross-reactivity was seen at the highest digoxin: interferent ratio studied (1:100). The proposed fluoroimmunosensor was successfully used to determine digoxin concentrations in human serum samples.     

Determination of beta-carotene in supplements and raw materials by reversed-phase high pressure liquid chromatography: collaborative study

Twelve laboratories representing 4 countries participated in an interlaboratory study conducted to determine all-trans-veta-carotene and total beta-carotene in dietary supplements and raw materials. Thirteen samples were sent as blind duplicates to the collaborators. Results obtained from 11 laboratories are reported. For products composed as softgels and tablets that were analyzed for total beta-carotene, the reproducibility relative standard deviation (RSDR) ranged from 3.35 to 23.09% and the HorRat values ranged from 1.06 to 3.72. For these products analyzed for trans beta-carotene, the reproducibility relative standard deviation (RSDR) ranged from 4.28 to 22.76% and the HorRat values ranged from 0.92 to 3.37. The RSDr and HorRat values in the analysis of a beadlet raw material were substantial and it is believed that the variability within the material itself introduced significant variation in subsampling. The method uses high pressure liquid chromatography (LC) in the reversed-phase mode with visible light absorbance for detection and quantitation. If high levels of alpha-carotenes are present, a second LC system is used for additional separation and quantitation of the carotene species. It is recommended that the method be adopted as an AOAC Official Method.     

Spins of resonances in the 12C + 16O system

The spins of resonances appearing at 22 MeV c.m. entrance channel energy in the ¹²C + ¹⁶O system are determined. Several inelastic transitions are used and a value of J^π = 15^? is deduced. This value disagrees with a previous J^π = 14⁺ assignment based on elastic scattering, but agrees with the J^π = 15^? value predicted at this energy by a recent microscopic calculation of ¹²C + ¹⁶O scattering.     

Gamma-ray transitions from the lowest f = 2 states of 24Na and 28Al

Using a DWBA code which exactly includes finite-range and recoil effects, calculations are shown for ¹²C(¹⁶O, ¹²O)¹⁶O, ⁴⁰Ca(¹⁶O, ¹²C)⁴⁴Ti and ⁴⁰Ca(⁶Li, d)⁴⁴Ti which seem to be in quantitative agreement with the assumption that these reactions proceed via the simple one-step transfer of an α-particle.     

Size limitations for the formation of ordered striped nanoparticles

A combination of immiscible molecules in the ligand shell of a gold nanoparticle (NP) has been shown to phase separate into a rippled structure; this phase separation can be used to direct the assembly of the NPs into chains. Here we demonstrate that only NPs within a certain size range can form chains, and we conclude that the rippled morphology of the ligand shell also exists only within that given size range. We corroborate this result with simulations of the ligand arrangement on NPs of various sizes.     

Estimation and measurement of flat or solenoidal coil inductance for radiofrequency NMR coil design

The inductance of a radiofrequency coil determines its compatibility with a given NMR probe circuit. However, calculation (or estimation) of inductance for radiofrequency coils of dimensions suitable for use in an NMR probe is not trivial, particularly for flat-coils. A comparison of a number of formulae for calculation of inductance is presented through the use of a straightforward inductance measurement circuit. This technique relies upon instrumentation available in many NMR laboratories rather than upon more expensive and specialized instrumentation often utilized in the literature. Inductance estimation methods are suggested and validated for both flat-coils and solenoids. These have proven very useful for fabrication of a number of new coils in our laboratory for use in static solid-state NMR probes operating at (1)H frequencies of 300 and 600MHz. Solenoidal coils with very similar measured and estimated inductances having inner diameters from 1 to 5mm are directly compared as an example of the practical application of inductance estimation for interchange of coils within an existing solid-state NMR probe.     

Determination of vitamin A (retinol) in infant formula and adult nutritionals by liquid chromatography: First Action 2011.15

During the "Standards Development and International Harmonization: AOAC INTERNATIONAL Mid-Year Meeting," held on June 29, 2011, an Expert Review Panel (ERP) reviewed the method for the "Determination of Vitamins A (Retinol) and E (alpha-Tocopherol) in Foods by Liquid Chromatography: Collaborative Study," published by Jonathan W. DeVries and Karlene R. Silvera in J. AOAC Int. in 2002. After evaluation of the original validation data, an ERP agreed in June 2011 that the method meets standard method performance requirements (SMPRs) for vitamin A, as articulated by the Stakeholder Panel on Infant Formula and Adult Nutritionals. The ERP granted the method First Action status, applicable to determining vitamin A in ready-to-eat infant and adult nutritional formula. In an effort to achieve Final Action status, it was recommended that additional information be generated for different types of infant and adult nutritional formula matrixes at varied concentration levels as indicated in the vitamin A (retinol) SMPR. Existing AOAC LC methods are suited for specific vitamin A analytical applications. The original method differs from existing methods in that it can be used to assay samples in all nine sectors of the food matrix. One sector of the food matrix was powdered infant formula and gave support for the First Action approval for vitamin A in infant and adult nutritional formula. In this method, standards and test samples are saponified in basic ethanol-water solution, neutralized, and diluted, converting fats to fatty acids and retinol esters to retinol. Retinol is quantitated by an LC method, using UV detection at 313 or 328 nm for retinol. Vitamin concentration is calculated by comparison of the peak heights or peak areas of retinol in test samples with those of standards.     

Determination of insoluble, soluble, and total dietary fiber (CODEX definition) by enzymatic-gravimetric method and liquid chromatography: collaborative study

A method for the determination of insoluble (IDF), soluble (SDF), and total dietary fiber (TDF), as defined by the CODEX Alimentarius, was validated in foods. Based upon the principles of AOAC Official Methods 985.29, 991.43, 2001.03, and 2002.02, the method quantitates water-insoluble and water-soluble dietary fiber. This method extends the capabilities of the previously adopted AOAC Official Method 2009.01, Total Dietary Fiber in Foods, Enzymatic-Gravimetric-Liquid Chromatographic Method, applicable to plant material, foods, and food ingredients consistent with CODEX Definition 2009, including naturally occurring, isolated, modified, and synthetic polymers meeting that definition. The method was evaluated through an AOAC/AACC collaborative study. Twenty-two laboratories participated, with 19 laboratories returning valid assay data for 16 test portions (eight blind duplicates) consisting of samples with a range of traditional dietary fiber, resistant starch, and nondigestible oligosaccharides. The dietary fiber content of the eight test pairs ranged from 10.45 to 29.90%. Digestion of samples under the conditions of AOAC 2002.02 followed by the isolation, fractionation, and gravimetric procedures of AOAC 985.29 (and its extensions 991.42 and 993.19) and 991.43 results in quantitation of IDF and soluble dietary fiber that precipitates (SDFP). The filtrate from the quantitation of water-alcohol-insoluble dietary fiber is concentrated, deionized, concentrated again, and analyzed by LC to determine the SDF that remains soluble (SDFS), i.e., all dietary fiber polymers of degree of polymerization = 3 and higher, consisting primarily, but not exclusively, of oligosaccharides. SDF is calculated as the sum of SDFP and SDFS. TDF is calculated as the sum of IDF and SDF. The within-laboratory variability, repeatability SD (Sr), for IDF ranged from 0.13 to 0.71, and the between-laboratory variability, reproducibility SD (SR), for IDF ranged from 0.42 to 2.24. The within-laboratory variability Sr for SDF ranged from 0.28 to 1.03, and the between-laboratory variability SR for SDF ranged from 0.85 to 1.66. The within-laboratory variability Sr for TDF ranged from 0.47 to 1.41, and the between-laboratory variability SR for TDF ranged from 0.95 to 3.14. This is comparable to other official and approved dietary fiber methods, and the method is recommended for adoption as Official First Action.     

Classification of Structural Motifs in Porphyrinic Coordination Polymers Assembled from Porphyrin Building Units, 5,10,15,20-Tetrapyridylporphyrin and Its Derivatives

Abstract  In this review, we classify 1D, 2D, and 3D structural motifs found in porphyrinic coordination polymers assembled from 5,10,15,20-tetrapyridylporphyrin (TPyP) and its derivatives. The classifications are based on dimensionality, metal-to-porphyrin linkage, porphyrin type, and metal-to-porphyrin ratio. 1D porphyrin polymers often share the same connectivity (or structural motifs) with analogous 2D and 3D polymers. We identify interrelationships among 1D, 2D, and 3D coordination polymers and examine the connectivity of such interrelated structures. We also discuss the broad similarities and differences of the synthetic methods of all structures presented here. Graphical Abstract  We classify 1D, 2D, and 3D structural motifs found in porphyrinic coordination polymers assembled from 5,10,15,20-tetrapyridylporphyrin (TPyP) and its derivatives. The classifications are based on dimensionality, metal-to-porphyrin linkage, porphyrin type, and metal-to-porphyrin ratio. We identify interrelationships among 1D, 2D, and 3D coordination polymers and examine the connectivity of such interrelated structures.