On the synthesis of geometric isomers of 2-methyl (or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones

Several Z-2-methyl(or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones 3Z, 4Z were prepared. The results obtained were compared by diazomethane insertion and condensation procedure. In order to synthesize E-2-phenyl-4-[α-arylethylidene]-5(4H)-oxazolones 4E hydrogen bromide isomerization in dry benzene was used.     

On-line high-performance liquid chromatographic diode array spectrophotometric analysis of steroidal hormones in illegal preparations

An on-line high-performance liquid chromatographic diode array spectroscopic analytical method for the identification of more than 60 different steroidal compounds is described. For the chromatographic separation, a gradient elution that could distinguish the esterified and non-esterified steroids in the same run on a reversed-phase C18 column, using methanol as modifier, was developed. For both types of compound an internal standard was chosen to establish reproducible relative retention times that could be used as one element of the identification; the second element is the UV spectrum, which is recorded on-line during the separation. The combination of chromatographic and UV spectroscopic recordings selects only a few probable steroids, which could be the unknown. This approach has been applied to forensic analysis of illicit preparations used in cattle-breeding, some examples of which are shown. For those steroids that are very difficult to distinguish using this procedure, because of their chromatographic and spectroscopic similarity on this system, other solvent mixtures are used in place of methanol as modifier, namely acetonitrile or tetrahydrofuran, or both, with the same solvent strength, as proposed by Snyder. In this way totally different elution patterns and separations are obtained, providing complementary information for identification, as shown by the systematic analysis on two other isoeluotropic solvent systems.     

Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.     

The key elements of traceability in chemical measurement: agreed or still under debate?

 Talking about "traceability" means talking about a "property of the result of a measurement", about "the value of a standard", about "stated references" and about an "unbroken chain of comparisons". It describes by which comparison, and to which other value, the result of a measurement has been obtained, i.e. is "traceable to". It is about the underlying structure of the measurement process of the result of a measurement and therefore about the authority of the result. Since values carried by (certified) reference materials have also been obtained by measurement, the definition of traceability equally applies. Traceability in the context of reference materials is also about the authority of the values carried by the (certified) reference materials and is, therefore, of key importance for the authority of the reference materials themselves. Hence, values of results of measurements constitute part of the traceability chain and their uncertainties are an intrinsic accompanying phenomenon. Uncertainties need a traceability chain against which they can be evaluated, and a traceability chain is an a priori requirement for evaluating the uncertainty budget of a measurement result. An attempt has been made to exemplify "traceability" chains in some types of chemical measurement and to identify the degree of international agreement on the key elements of "traceability". It is concluded that there is less than universal agreement on this issue. The debate should continue in order to arrive at the international understanding and agreement needed, as "traceability" is now being incorporated in the International Organization for Standardization (ISO), the International Laboratory Accreditation Co-operation (ILAC) and in other "guiding" or regulatory documents. It is also the reason why the Institute for Reference Materials and Measurements (IRMM) has taken up the study of the concept in its core programme on Metrology in Chemistry, and why it sponsored the Workshop in Bratislava.

     

A New and Efficient Synthetic Method and Antibacterial Activities of Oxazolidinone Analogues

A series of novel oxazolidinone analogues were prepared by a new and efficient synthetic method and their antibacterial activities were determined. These compounds wer echaracterized by LC-MS and ^1H NMR.     

Optimization of culture medium and conditions for penicillin acylase production by Streptomyces lavendulae ATCC 13664

The culture medium for Streptomyces lavendulae ATCC 13664 was optimized on a shake-flask scale by using a statistical factorial design for enhanced production of penicillin acylase. This extracellular enzyme recently has been reported to be a penicillin K acylase, presenting also high hydrolytic activity against penicillin V and other natural aliphatic penicillins such as penicillin K, penicillin F, and penicillin dihydroF. The factorial design indicated that the main factors that positively affect penicillin acylase production by S. lavendulae were the concentration of yeast extract and the presence of oligoelements in the fermentation medium, whereas the presence of olive oil in the medium had no effect on enzyme production. An initial concentration of 2.5% (w/v) yeast extract and 3 microg/mL of CuSO4 x 5H2O was found to be best for acylase production. In such optimized culture medium, fermentation of the microorganism yielded 289 IU/L of enzyme in 72 h when employing a volume medium/volume flask ratio of 0.4 and a 300-rpm shaking speed. The presence of copper, alone and in combination with other metals, stimulated biomass as well as penicillin acylase production. The time course of penicillin acylase production was also studied in the optimized medium and conditions. Enzyme production showed catabolite repression by different carbon sources such as glucose, lactose, citrate, glycerol, and glycine.     

(2+2)-cycloaddition of triazolinediones to strained bicycloalkenes

Substituted norbornenes and dibenzobarrelene react under forced conditions with $\text{N}$-methyl-1,2,4-triazolin-3,5-diones to afford urazoles via (2+2)-cycloaddition.     

High-speed liquid and thin-layer chromatography of polychlorinated biphenyls.

High-speed liquid chromatography in the system silica gel/dry n-hexane and ultraviolet spectrometry have been used to study the composition of various types of commercially available mixtures of chlorinated biphenyls. Special attention has been paid to the analysis of highly chlorinated products. In addition to data previously published, retention times are recorded for 11 individual polychlorinated biphenyls. The results of high-speed liquid chromatography are compared with those obtained in several normal and reversed-phase thin-layer chromatographic systems.     

Conformation and chiroptical properties of mandelic acids

Using CD data (solution, solid state, various temperatures), X-ray data and MO calculations for a number of substituted mandelic acids (phenylglycolic acids) an attempt was made to explain the different results for the relation between sign of the ¹L_b CD band and substitution pattern as described in the literature for various types of aromatic compounds. Moreover the reported sector rule has been reconsidered taking into account the sign and magnitude of the spectroscopic moments. It has been found that in any explanation of the signs of the ¹L_b CD bands of substituted aromatic compounds both the conformational behaviour and the spectroscopic moments should be taken into account.