A minimal multiconfigurational technique

A direct minimization method previously presented by the authors is applied here to biconfigurational wave functions. A very moderate increasing in the time by iteration with respect to the one-determinant calculation and good convergence properties have been found. So qualitatively correct studies on singlet systems with strong biradical character can be performed with a cost similar to that required by Hartree-Fock calculations.     

Aromatic protonation—4: On the 1H-2H exchange of three 9-n-alkylanthracenes on reaction with CF3CO2[2H] and FSO3[2H]

The reactions of 9-methyl-, 9-ethyl- and 9-propyl-anthracene with CF₃CO₂[²H] in C[²H]Cl₃ and with FSO₃[²H] in SO₂ClF have been investigated. Using 4 equivalents of CF₃CO₂[²H] at 50° ¹H-²H exchange was observed only for the 10-H and the side-chain α-hydrogens, and on using 8 and 12 equivalents at 50° also for the aromatic α-hydrogens. Treatment of the substrates with FSO₃[²H] at -60° leads to the stable 9-alkyl-[10-²H]-10-anthracenium ions. On warming up to ?25° a slow ¹H-²H exchange of only the 10-¹H of these anthracenium ions is observed. A mechanism for the ¹H-²H exchange of the aromatic and the side-chain α-hydrogens of the 9-alkylanthracenes is presented.     

Spectroscopic Studies on the Interaction of Tetramethylpyridylporphyrins and Cationic Clays

In the present work, the interaction between5,10,15,20-tetrakis(1-methyl-4-pyridyl)-21H,23H-porphine (TMPyP) and its metallated form(CoTMPyP) with three cationic clays was investigatedby X-ray diffraction (XRD), UV-VIS and resonance Ramanspectroscopies. Sodium montmorillonites K10 and KSFand a synthetic fluorohectorite (FHT) containingdifferent macrocycle loadings, were prepared by an ionexchange reaction. In nonsaturated KSF and FHT, theCoTMPyP molecule assumes a flat orientation, relativeto the host layers, giving rise to at least twoabsorption bands in the Soret region (ca. 445 and 465 nm)assigned to adsorbed and intercalated CoTMPyP,respectively. For the delaminated K10 sample, a broadband centered around 456 nm, indicates a majorcontribution from the metalloporphyrin on the clayexternal surfaces. The electronic spectra of FHTsamples containing increasing amounts of CoTMPyPshow bands red shifted even when a small amount ofporphyrin is used, suggesting that the electroniclevels of the macrocycle are more affected by theinteraction with the clay than by the metalloporphyrindistortion inside the galleries. The resonance Ramanspectra obtained for all CoTMPyP samples presentedonly minor shifts in peak positions and band width,with the exception of the FHT saturated sample, wherethe bands are clearly broader when compared to otherloadings, suggesting that porphyrin aggregation isoccurring. In the case of TMPyP, the bands at ca. 430and 468 nm were assigned to nonprotonated andprotonated molecules, respectively. This assignment issupported by resonance Raman spectroscopy, which alsoshowed the ₂ mode (ca. 1550 cm^-1) to bethe most sensitive peak to protonation.     

Reversible pressure deformation of a thermophilic cytochrome P450 enzyme (CYP119) and its active-site mutants

The pressure stability of the thermophilic CYP119 from Sulfolobus solfataricus and its active-site Thr213 and Thr214 mutants was investigated. At 20 degrees C and pH 6.5, the protein undergoes a reversible P450-to-P420 inactivation with a midpoint at 380 MPa and a reaction volume change of -28 mL/mol. The volume of activation of the process was -9.5 mL/mol. The inactivation transition was retarded, and the absolute reaction volume was decreased by increasing temperature or by mutations that decrease the size of the active-site cavity. High pressure affected the tryptophan fluorescence yield, which decreased by about 37% at 480 MPa. The effect was reversible and suggested considerable contraction of the protein. Aerobic decomposition of iron-aryl complexes of the CYP119 T213A mutant under increasing hydrostatic pressure resulted in variation of the N-arylprotoporphyrin-IX regioisomer (N(B):N(A):N(C):N(D)) adduct pattern from 39:47:07:07 at 0.1 MPa to 23:36:14:27 at 400 MPa. Preincubation of the protein at 400 MPa followed by complex formation and decomposition gave the same regioisomer distribution as untreated protein. The results indicate that the protein is reversibly inactivated by pressure, in contrast to the irreversible inactivation of P450(cam) and other P450 enzymes, and that this inactivation process is modulated by changes in the active-site cavity dimensions.     

A dedicated NAA method to determine the neutron spectrum monitor elements Co,Au and Lu with high accuracy in alloyed wires and foils

A dedicated NAA calibration method was developed for the determination of the neutron spectrum monitor elements Co, Au and Lu in alloyed wires and foils, with an accuracy of better than 1%. The method does not require quantitative micropipetting for preparing the standards, and leads to vanishing errors caused by flux inhomogeneities and by differences in counting geometry and gamma attenuation. Its performance was tested by analysing various NIST, IRMM and RX aluminium-based materials with certified or specified Co, Au or Lu content.     

Binding of hexacyanoferrate(II) by aliphatic amines in aqueous solution

The stability of hexacyanoferrate(II)-amine(methylamine, ethylenediamine, diethylenetriamine and tetraethylenepentamine) was determined potentiometrically. Species Fe(CN)₆(A)H _j ^(j–4) (A=amine) are formed in all the systems investigated, with j=1...n+2 (n=number of aminogroups). Some other complexes Fe(CN)₆(A)_iH_j (with i>1) were also found. The stability of these complexes is fairly high: the full protonated amine species, show for the reaction Fe(CN)₆ ^4- + H_nAⁿ⁺ = Fe(CN)₆(A)H_n ^(n-4) an equilibrium constant given by logK=0.686+2.10n. Factors affecting the stability are discussed in comparison with similar systems, together with the importance of interferences.     

lα-hydroxy previtamin D3, and its selective formation from 1-keto previtamin D3

An efficient method for the preparation of crystalline α-hydroxy previtamin D₃ is described. Also the stereoselective reduction of 1-keto previtamin $\text{9}$ is discussed; it was observed that with aluminum hydride $\text{7}$ is the most abundant product. This stands in contrast with previously reported LiAlH₄ and NaBH₄ mediated reductions.     

Crystal Structures and Magnetic Studies of Naphthalene Derivatives Containing Nitronly Nitroxides

Crystal structures of new nitronyl nitroxide derivatives 1, 2 and 3 were determined with X‐ray diffraction analysis: 1, monoclinic, C₂/c, a = 1.2404(5) nm, b = 0.9730(5) um, c = 2.7049(10) ran, β = 98.189(15)°, V = 3.2315(24) nm³, Z = 8; 2, or‐thorhombic, Pbca, a = 0.61262(2) nm, b = 1.11426(6) nm, c = 2.30543(13) nm, V = 1.57373(13) nm³, Z = 4; 3, monoclinic, P2(1)/n, a=0.64253(4) nm, b=2.55003(17) nm, c = 1.15497(6) nm, β = 95.000(3)°, V = 1.8852(2) nm³, Z = 4. Their magnetic properties were measured with SQUID and analyzed based on their crystal structures with simple singlet‐triplet, modified one dimensional antiferromagnetic chain and modified singlet‐triplet models respectively: 1, J/k_b= ?2.5 K; 2, J/k_b = 7.8 K, θ = 2.8 K; 3, J/k_b = ?0.96 K, θ = 0.21 K.     

Differentiation between dexamethasone and betamethasone in a mixture using multiple mass spectrometry

Direct gas chromatographic methods to analyse phenylurea pesticides are discouraged by the thermal instability of these compounds, that in conventional hot splitless inlet systems leads to extensive and irreproducible formation of isocyanates and amines. However a careful control of the operating conditions, like the inlet temperature, the pressure and the presence of suitable chemical additives (as acetic acid, low-molecular-mass amines, organic anhydrides) can either: (i) minimise the thermal decomposition enabling the direct GC-MS analysis of phenylureas, or (ii) lead to reproducible conversion to isocyanates. Experimental design was employed to study the effect of the experimental variables on the thermal transformation of phenylurea pesticides in splitless inlet system. Two strategies were alternatively optimised: (i) the minimisation of degradation reactions to increase the signal of phenylureas; (ii) the maximisation of the degradation to isocyanates that are in turn determined. The maximal yields in isocyanate were obtained with high inlet temperatures, low carrier flows in the injection phase and the presence of acetic anhydride. By contrast, the use of relatively low inlet temperatures, high carrier flows during the injection and the presence of an amine maximise the response of the parent compounds.