MECO超导磁体支撑和冷屏的热流体计算

μ介子转化为电子实验装置(MECO)是美国能源部目前在建的一个高能物理项目。本文提出了MECO中的PS、TS1、TS2、DS四个超导螺线管磁体支撑和冷屏新的冷却方案,设计了支撑和冷屏的冷却结构。采用三维仿真方法,计算得到新方案下磁体冷质量的热负荷,并计算了50K冷却氦流质量流量、压降的大小以及冷屏上温度分布。从而为冷却结构设计和制定的新方案提供可靠的理论依据。     

水波聚焦的研究

利用水波槽装置观察到了水波聚焦现象,并利用流体力学中的表面波理论,借用光学中对折射率的定义,推出了与光线通过薄透镜聚焦完全对应的水波聚焦理论公式,以及焦距随水深变化的关系曲线,从而将水波的几何特性与光波的几何特性统一起来。     

基于14 MeV中子的烧氚历史诊断模拟研究

针对直接测量16.7 MeV进行烧氚历史诊断所需聚变产额高的情况,模拟研究了利用14 MeV中子与副靶作用产生的非弹伽马进行烧氚历史诊断的情况,计算了几种材料14 MeV中子作用产生的次级伽马能谱以及切伦科夫辐射阈能之上的非弹伽马数目,对副靶材料和厚度进行了选择。计算了14 MeV中子产生的切伦科夫光子时间谱,分析了光电转换器件处伽马、电子以及正电子等噪声信号,分析了气体切伦科夫系统测量统计涨落与聚变中子产额之间的关系,确定了气体切伦科夫系统所适用的最低聚变中子产额,通过测量14 MeV中子与副靶产生的非弹伽马进行烧氚历史诊断较直接测量16.7 MeV伽马可将测量所需聚变中子产额降低2个量级。     

二氢黄酮类化合物的核磁共振碳谱模拟研究

采用表征分子内部化学微环境的结构描述子原子电负性作用矢量(Atomic Electronegativity Interaction Vector, AEIV)对255个共振碳原子进行了结构表征,应用多元线性回归技术建立了结构描述子AEIV与这些碳原子的¹³C NMR化学位移的定量相关模型.该定量结构谱图关系(定量构谱关系/QSSR)模型的复相关系数达到R_MM=0.915,标准偏差为SD_MM=14.879. 采用留一法交互检验的结果为R_CV=0.909,SD_CV=15.324. 结果表明,模型具有良好的估计力和稳定性.     

Melting and resolidification of gold film irradiated by laser pulses less than 100 fs

The rapid melting and resolidification of gold films irradiated by laser pulses less than 100 fs are investigated using the dual-hyperbolic two-step model. The solid–liquid interfacial velocity in the ultrafast phase change process is obtained by coupling a hyperbolic interfacial energy balance equation and nucleation dynamics. The results are compared with the experimental data for the 28-fs laser. The effects of laser pulse widths and fluences on melting process are investigated. A phase chart of the variations of pulse widths and fluences is established. The relationship between the melting threshold and ablation threshold is also presented.     

Beam bending through compound structure with two subwavelength metallic slits in each period

To provide a more practical, easy-to-implement method to achieve directional modulation with a plasmonic lens, beam manipulation method via compound metallic gratings with two subwavelength slits filled with different dielectrics inside each period is proposed and numerically investigated by finite-difference time-domain (FDTD) method. Compared with conventional metal-grating based structures, phase retardation is tuned by the Fabry-Pérot (FP) resonant condition and light bending is achieved by constructing a carefully designed, curved phase front for the plasmonic lenses. Our designs have advantages in ease of fabrication and capability to perform in the far field. With these advantages, the designs are expected to be valuable in applications such as plasmonic circuits and photonic communication.     

Pose estimation for UAV aerial refueling with serious turbulences based on extended Kalman filter

In recent years, many pose estimation algorithms were developed, and have been successfully applied to solve unmanned aerial vehicle (UAV) aerial refueling pose estimation problems. This paper mainly focuses on solving this problem under serious turbulences circumstance. The extended Kalman filter is a set of mathematical equations to estimate the state of a process, which is able to support estimations of past, present, and even future states. In reference to previous papers and some simulations, we build up the noise models of refueling boom and atmospheric turbulence. Then, an extend Kalman filter is adopted to solve the pose estimation problem in UAV aerial refueling with serious turbulences. The experimental results demonstrate the feasibility and effectiveness of our proposed approach.     

A novel fiber optic ring-down interferometer for sensing

A ring-down interferometer (RDI) based on a modified Mach–Zehnder structure by incorporating a pair of mirrors with very high reflectivity into each of its two arms, respectively is proposed in this paper. Launching a coherent light pulse into the interferometer, in each arm, pulse ring-down occurs between its two mirrors and outputs a chain of pulses. The two chains of pulses from the two arms combine and interfere pulse by pulse at the detector and the difference of the light phase between the two arms will be enlarged linearly in proportion to the times of ring-down.     

Influence of Er-doped superfluorescent fiber source's spectrum-stability on the SNR of fiber optic gyroscopes

The output spectrum-stability of Er-doped superfluorescent fiber source (SFS) was measured by changing the temperature around the excited Er-doped fiber (EDF). With the experiment results, the influences of the SFS's spectrum-stability on the signal-to-noise ratio (SNR) of fiber optic gyroscope (FOG) were simulated. The simulated results demonstrate that the SNR of FOG will change no matter the power, mean wavelength or the spectral bandwidth of the light output from the Er-doped SFS is changing. The results show that the changing of SNR caused by the output power's variation is three orders of magnitude larger than that caused by the variation of mean wavelength or bandwidth. And the main factor influencing the stability of FOG's SNR is the temperature-stability of the output power of Er-doped SFS.