An approximate potential energy surface for HeI2 collisions

We have calculated the interaction potential for HeI₂ in T-shaped geometries using Hartree—Fock and Møller—Plesset third-order perturbation t     

Chromatographic competitive binding immunoassays: a comparison of the sequential and simultaneous injection methods

Two approaches for performing competitive binding immunoassays by HPLC and other flow-based systems are the simultaneous and sequential injection methods. Both these techniques make use of a column with a limited amount of antibody, onto which is injected a sample and a fixed amount of a labeled analyte analog. An indirect measure of the unlabeled analyte in the sample is then obtained by looking at the amount of analog in either the nonretained or retained peaks. In the simultaneous injection mode, the sample and labeled analog are applied at the same time to the column, while in the sequential mode the sample is injected first, followed by the analog. This results in a difference in the analytical characteristics of these two approaches. This study used chromatographic theory and previous data obtained for injections of human serum albumin (HSA) onto an anti-HSA antibody column to compare the response, detection limits, range, and sensitivity of these methods. Under equivalent conditions, it was found that the sequential method always provided the best lower limit of detection and sensitivity. However, the simultaneous mode had a broader dynamic range and higher upper limit of detection. From these observations, several guidelines were developed regarding the use and selection of such assays for new applications.     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

Enaminone‐Based Synthesis of Dipodazine Derivatives

A series of racemic dipodazine analogues 9 were prepared in 22–80% yield from (3Z,6RS)‐3‐[(dimethylamino)methylidene]‐6‐methyl‐1‐(phenylmethyl)piperazine‐2,5‐dione ( 7 ) (Scheme 1), which was prepared in four steps from (RS)‐alanine methyl ester hydrochloride. The preparation of nonracemic 7 from (S)‐alanine methyl ester hydrochloride failed, since the introduction of the enamino functionality at position 3 of the precursor 6 was accompanied by almost complete racemization.     

A three-component coupling process based on vicarious nucleophilic substitution (VNS(AR))-alkylation reactions: an approach to indoprofen and derivatives.

The intermediate anion derived from the vicarious nucleophilic substitution (VNS) of hydrogen reacts with a series of alkyl halides to generate the corresponding alpha-alkylated conventional VNS product in a one-pot process. This one-pot VNS-alkylation reaction offers a convenient route to a range alpha-substituted nitrobenzyl phosphine oxides, sulfones, and esters via a three-component coupling reaction. Reactions of alpha-chloroethyl phenyl sulfone (14) and ethyl 2-chloropropionate (16) with nitrobenzene followed by subsequent addition of an alkylating agent give a series of sulfones and esters bearing an alpha-aryl quaternary center. The VNS-alkylation protocol has been applied to the synthesis of derivatives of Indoprofen from nitrobenzene using readily available inexpensive starting materials. Indoprofen itself was prepared using the conventional VNS reaction in four steps and 24% overall yield from nitrobenzene.     

Nonaqueous biocatalytic synthesis of new cytotoxic doxorubicin derivatives: exploiting unexpected differences in the regioselectivity of salt-activated and solubilized subtilisin

Two enzymes, Mucor javanicus lipase and subtilisin Carlsberg (SC), catalyzed the nonaqueous acylation of doxorubicin (DOX). Compared to the untreated enzyme the rate of DOX acylation at the C-14 position with vinyl butyrate in toluene was 25-fold higher by lipase ion-paired with Aerosol OT (AOT) and 5-fold higher by lipase activated by 98% (w/w) KCl co-lyophilization (3.21 and 0.67 mumol/min g-lipase, respectively, vs 0.13 mumol/min g-lipase). Particulate subtilisin Carlsberg (SC) was nearly incapable of DOX acylation, but ion-paired SC (AOT-SC) catalyzed acylation at a rate of 2.85 mumol/min g-protease. The M. javanicus formulations, AOT-SC, and SC exclusively acylated the C14 primary hydroxyl group of DOX. Co-lyophilization of SC with 98% (w/w) KCl expanded the enzyme's regiospecificity such that KCl-SC additionally acylated the C4' hydroxyl and C3' amine groups. The total rate of DOX conversion with KCl-SC was 56.7 mumol/min g-protease. The altered specificity of KCl-SC is a new property of the enzyme imparted by the salt activation, and represents the first report of unnatural regioselectivity exhibited by a salt-activated enzyme. Using AOT-SC catalysis, four unique selectively acylated DOX analogues were generated, and KCl-SC was used to prepare DOX derivatives acylated at the alternative sites. Cytotoxicities of select derivatives were evaluated against the MCF7 breast cancer cell line (DOX IC50 = 27 nM) and its multidrug-resistant sub-line, MCF7-ADR (DOX IC50 = 27 muM). The novel derivative 14-(2-thiophene acetate) DOX was relatively potent against both cell lines (IC50 of 65 nM and 8 muM, respectively) and the 14-(benzyl carbonate) DOX analogue was as potent as DOX against the MCF7 line (25 nM). Activated biocatalysts and their novel regioselectivity differences thus enabled single-step reaction pathways to an effective collection of doxorubicin analogues.     

Determination of the total nitrogen content of hard, semihard, and processed cheese by the Kjeldahl method: collaborative study

The objective of this collaborative study was to determine interlaboratory performance statistics for a modified and optimized version of AOAC Method 920.123 for the determination of the total nitrogen content of hard, semihard, and processed cheese by Kjeldahl analysis. Details included addressing the issues of material homogeneity, test portion size (1 g), quantitative transfer (weighing on to filter paper), ensuring system suitability (nitrogen recoveries), and using AOAC Method 991.20 as the basis for nitrogen analysis. Fifteen laboratories tested 18 pairs of blind duplicate cheese materials with a crude protein content between 18 and 36%. Materials represented hard, semihard, and processed commercial cheeses with a wide range of composition. Statistical performance parameters expressed as crude protein (nitrogen x 6.38), g/100 g, with invalid and outlier data removed were mean = 26.461, repeatability standard deviation (Sr) 0.111, reproducibility standard deviation (S(R)) = 0.153, repeatability relative standard deviation (RSDr) = 0.42%, reproducibility relative standard deviation (RSDR) = 0.58%, repeatability (r) = 0.312, and reproducibility (R) = 0.428. The interlaboratory study results were acceptable and comparable to those for the milk Kjeldahl nitrogen method on a relative nitrogen basis. The Study Directors recommend that this modified method for the determination of total nitrogen in hard, semihard, and processed cheese by Kjeldahl analysis be adopted First Action as an improved method to replace Method 920.123.     

Pyridine N-alkylation by lithium, magnesium, and zinc alkyl reagents: synthetic, structural, and mechanistic studies on the bis(imino)pyridine system

The 2,6-bis(alpha-iminoalkyl)pyridines 2,6-[ArNC(CR(3))](2)C(5)H(3)N [R = H, D; Ar = 2,6-i-Pr(2)C(6)H(3) (DIPP), 2,6-Me(2)C(6)H(3) (DMP)] react with MeLi in Et(2)O to give a binary mixture of products: the pyridine N-methylated species 2,6-[ArNC(CR(3))](2)C(5)H(3)N(Me)Li(OEt(2)) and the deprotonated/dedeuterated species 2-[ArNC(CR(3))],6-[ArNC(=CR(2))]C(5)H(3)NLi(OEt(2)). For R = D, the product ratio is 2:1 in favor of the N-methylated product, while, for R = H, the deprotonated product is favored by 5:1, increasing to 8:1 in toluene solvent. Warming solutions of the N-methylated species leads to clean conversion to the thermodynamically preferred deprotonated species. Crossover experiments show that MeLi is re-formed and dissociates from the terdentate ligand before deprotonating the ketimine methyl unit. For MgR(2) (R = Et, i-Pr) and ZnR(2) (R = Et) reagents, N-alkylation products are formed exclusively, but derivatives containing bulky aryl substituents are found to undergo further rearrangement to 2-alkylated species, arising by migration of the alkyl group of the N-alkyl moiety to the adjacent ring carbon atom. The reversibility of the N-alkylation process has been probed using deuterio-labeled Mg alkyl reagents and mixed alkyl zinc species. A cationic zinc derivative is shown to undergo "reverse" alkyl migration, from the heterocycle nitrogen atom to the zinc center. EPR spectroscopy reveals a paramagnetic intermediate in which the unpaired electron is delocalized over the heterocycle and di-imine moieties of the ligand, indicating that the N-alkylation reactions proceed via single electron-transfer processes.     

Photophysical properties of anthanthrene-based tunable blue emitters

Anthanthrene (1) derivatives substituted at the 4,10 and 6,12 positions (2-6) were synthesized as promising candidates for organic light emitting diodes (OLEDs). The emission of these compounds can be manipulated in the blue region (lambda(max) = 437-467 nm) through structural modifications. Photophysical and electrochemical properties (phi(F) = 0.20-0.47; tau(F) = 2.97-6.06 ns; HOMO-LUMO energy gap = 2.25-2.56 eV) as well as geometry optimized structures of 1-6 are reported.     

Synthesis and characterization of monomers and polymers of acrylated phosphonate esters derived from glycerol,D-mannitol,D-sorbitol,pentaerythritol, and dipentaerythritol

Phosphonic acid ester derivatives of glycerol, D -mannitol, D -sorbitol, pentaerythritol, and dipentaerythritol have been synthesized by transacetalation reactions with diethyl 2,2-diethoxyethylphosphonate. These phosphonated derivatives of polyols and carbohydrates have been esterified to from the corresponding methacrylates. All these compounds have been characterized on the basis of their elemental analysis and spectroscopic (infrared including FT–IR, ¹H-, ¹³C-, ³¹P-NMR, and mass) methods. Transacetalation reactions with dialkyl 2,2-dialkoxyethylphosphonate lead to the synthesis of 1,3-dioxane derivatives in the case of D -mannitol, pentaerythritol, and dipentaerythritol, whereas a mixture of both 1,3-dioxane and 1,3-dioxolane derivatives is obtained with D -sorbitol and glycerol. The methacrylates of phosphonylated polyol derivatives show the capacity to dissolve and interact with metal salts such as bismuth bromide and uranyl nitrate. Some of the polymers obtained from these monomers have been characterized on the basis of their spectral and thermal (differential scanning calorimetry) properties.