PHOTOSENSITIZATION OF MURINE TUMOR, VASCULATURE and SKIN BY 5-AMINOLEVULINIC ACID-INDUCED PORPHYRIN

Abstract— The effects of topical and systemic administration of 5-aminolevulinic acid (ALA) were examined in several murine tumor systems with regard to porphyrin accumulation kinetics in tumor, skin and blood, vascular and tumor cell photosensitization and tumor response after light exposure. Marked, transient increases in porphyrin levels were observed in tumor and skin after systemic and topical ALA. Rapid, transient, dose-dependent porphyrin increases were also observed in blood; these were pronounced after systemic ALA injection and mild after topical application. They were highest within 1 h after ALA injection, thereafter declining rapidly. This matched the clearing kinetics of injected exogenous protoporphyrin IX (PpIX). Initially, vascular photosensitivity changed inversely to blood porphyrin levels, increasing gradually up to 5 h post-ALA, as porphyrin was clearing from the bloodstream. This pattern was again matched by injected, exogenous PpIX. After therapeutic tumor treatment vascular disruption of the tumor bed, while observed, was incomplete, especially at the tumor base. Minimal direct tumor cell kill was found at low photodynamic therapy (PDT) doses (250 mg/kg ALA, 135 J/cm² light). Significant, but limited (<1 log) direct photodynamic tumor cell kill was obtained when the PDT dose was raised to 500 mg/kg systemic ALA, followed 3 h later by 270 J/cm², a dose that was however toxic to the animals. The further reduction of clonogenic tumor cells over 24 h following treatment was moderate and probably limited by the incomplete disruption of the vasculature. Tumor responses were highest when light treatment was carried out at the time of highest tumor porphyrin content rather than at the time of highest vascular photosensitivity. Tumor destruction did not reach the tumor base, regardless of treatment conditions.     

Two-stage Off-Gel isoelectric focusing: protein followed by peptide fractionation and application to proteome analysis of human plasma

This paper presents the recently introduced Off-Gel electrophoresis (OGE) technology as a versatile tool to reproducibly fractionate intact proteins and peptides into discrete liquid fractions. The coupling of two stages of OGE, i.e., the separation of intact proteins in a first-stage followed by fractionation of peptides derived from each protein fraction after proteolysis in a second stage, results in an array of 15 x 15 fractions that are directly amenable to additional peptide fractionation like reverse-phase liquid chromatography (RPC). The analysis of all second-stage peptide fractions from only the first-stage protein fraction representing pH 5.0 -5.15 by on-line reverse-phase LC-tandem mass spectrometry resulted in the identification of 53 proteins (337 peptides), of which 10 were on different immunoglobulin (Ig) chains, with an input of only 1.5 mg human blood plasma proteins. Increasing the protein load to approximately 12 mg increased the number of identified proteins in the same protein fraction to 73 proteins (449 peptides), of which 15 were Ig-related. Immunodepletion of six of the most abundant proteins (albumin, transferrin, haptoglobin, IgG, IgA, and alpha-1-antitrypsin) prior to first-stage OGE with an input of 1.5 mg of protein (equivalent to approximately 10 mg nondepleted plasma) resulted in the identification of 81 proteins (660 peptides), of which three were still Ig fragments. The pI-based separation of peptides appears to be nonuniform based on the theoretically determined pI values of identified peptides. This observation specifically accounts for the neutral zone (pI 5-8) and can be accounted for by the physicochemical properties of the peptides given by their amino acid composition. The power of OGE separation of proteins and peptides is discussed with a focus on the use of the knowledge about the pI of proteins and peptides that assist the validation of correct identifications together with the retention time of peptides on RPC.     

Ligand-assisted reduction of osmium tetroxide with molecular hydrogen via a [3+2] mechanism

Osmium tetroxide is reduced by molecular hydrogen in the presence of ligands in both polar and nonpolar solvents. In CHCl3 containing pyridine (py) or 1,10-phenanthroline (phen), OsO4 is reduced by H2 to the known Os(VI) dimers L2Os(O)2(mu-O)2Os(O)2L2 (L2 = py2, phen). However, in the absence of ligands in CHCl3 and other nonpolar solvents, OsO4 is unreactive toward H2 over a week at ambient temperatures. In basic aqueous media, H2 reduces OsO4(OH)n(n-) (n = 0, 1, 2) to the isolable Os(VI) complex, OsO2(OH)4(2-), at rates close to that found in py/CHCl3. Depending on the pH, the aqueous reactions are exergonic by deltaG = -20 to -27 kcal mol(-1), based on electrochemical data. The second-order rate constants for the aqueous reactions are larger as the number of coordinated hydroxide ligands increases, k(OsO4) = 1.6(2) x 10(-2) M(-1) s(-1) < k(OsO4(OH)-) = 3.8(4) x 10(-2) M(-1) s(-1) < k(OsO4(OH)2(2-)) = 3.8(4) x 10(-1) M(-1) s(-1). The observation of primary deuterium kinetic isotope effects, k(H2)/k(D2) = 3.1(3) for OsO4 and 3.6(4) for OsO4(OH)-, indicates that the rate-determining step in each case involves H-H bond cleavage. Density functional calculations and thermochemical arguments favor a concerted [3+2] addition of H2 across two oxo groups of OsO4(L)n and argue against H* or H- abstraction from H2 or [2+2] addition of H2 across one Os=O bond. The [3+2] mechanism is analogous to that of alkene addition to OsO4(L)n to form diolates, for which acceleration by added ligands has been extensively documented. The observation that ligands also accelerate H2 addition to OsO4(L)n highlights the analogy between these two reactions.     

Evidence of impurities in thiolated single-stranded DNA oligomers and their effect on DNA self-assembly on gold

The diversity of techniques used in the synthesis, treatment, and purification of the single-stranded DNA oligomers containing a thiol anchor group (SH-ssDNA) has led to a significant variation in the purity of commercially available SH-ssDNA. In this work, we use X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to study how the impurities present in commercially synthesized SH-ssDNA oligomers affected the structure of the resulting DNA films on Au. XPS results indicate that two of the purchased SH-ssDNA oligomers contain excess carbon and sulfur. The molecular fragmentation patterns obtained with ToF-SIMS were used to determine the identity of several contaminants in the DNA films, including poly(dimethylsiloxane) (PDMS), lipid molecules, and sulfur-containing molecules. In particular, the ToF-SIMS results determined that the excess sulfur detected by XPS was due to the presence of dithiothreitol, a reductant often used to cleave disulfide precursors. Furthermore, we found that the SH-ssDNA self-assembly process is affected by the presence of these contaminants. When relatively pure SH-ssDNA is used to prepare the DNA films, the P, N, O, and C atomic percentages were observed by XPS to increase over a 24-h time period. In contrast, surfaces prepared using SH-ssDNA containing higher levels of contaminants did not follow this trend. XPS result indicates that, after the initial SH-ssDNA adsorption, the remaining material incorporated into these films was due to contamination.     

Practical Pd/C-mediated allylic substitution in water

Pd/C-mediated allylic substitution in water is described as an interesting alternative to classical homogeneous conditions. The reaction applied to allylic acetates showed a wide range of compatibility with various nitrogen, sulfur, oxygen, and carbon nucleophiles. Notably, the method features inexpensive reagents and a nontoxic solvent. Moreover, measurement of the palladium content in water by ICP-MS shows low palladium contamination (4 ppm) of the solvent, rendering this method safer for the environment compared to homogeneous conditions. The first asymmetric example of Pd/C-mediated allylic substitution is also disclosed.     

Hybrid fluorocarbon-hydrocarbon CO2-philic surfactants. 2. formation and properties of water-in-CO2 microemulsions

Hybrid fluorocarbon-hydrocarbon (F-H) sulfate surfactants are shown to be efficient stabilizers in water-in-CO2 (w/c) microemulsions. The chain structure and F-H ratio affect the regions of P-T phase stability and aggregation structure in these w/c phases. High-pressure near-infrared spectroscopy and small-angle neutron scattering measurements of microemulsified water provide evidence for the stabilization of w/c microemulsion droplets. The relative lengths of the two chains were found to influence the favored aggregation structure: for symmetric chain surfactants (F8H8, F7H7) spherical reverse micelles are present, but for asymmetric chain surfactants (F7H4, F8H4) extended cylinder aggregates form. These changes in aggregation are consistent with different surfactant packing parameters owing to the controlled variations in molecular structure. Furthermore, the general order of w/c phase transition pressures (F8H8 < F7H7 and F8H4 < F7H4) is in line with estimations of surfactant fractional free volume, as proposed by Johnston et al. (J. Phys. Chem. B 2004, 108, 1962-1966). Studies of adsorption at the poly(dimethylsiloxane)-water interface are shown to be valuable for assessing the CO2-philicity of new surfactants. All in all, the symmetric F8H8 and F7H7 analogues are seen to be the most efficient compounds from this class for applications in CO2.     

Synthesis and determination of pKa values of some new 3,4-disubstituted-4,5-dihydro-1H-1,2,4-triazol-5-one derivatives in non-aqueous solvents

3-Alkyl(Aryl)-4-amino-4,5-dihydro-1H-1,2,4-triazol-5-ones (2) reacted with 2-furoyl chloride and thiophene-2-carbonyl chloride to afford the corresponding 3- alkyl(aryl)-4-(2-furoylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (3) and 3-alkyl(aryl)- 4-(2-thienylcarbonylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (4), respectively. The new compounds synthesized were characterized by using IR, 1H-NMR, 13C-NMR and UV spectral data together with elemental analysis. In addition, to investigate the effects of solvents and molecular structure upon acidity, compounds 3 and 4 were titrated potentiometrically with tetrabutylammonium hydroxide in four non-aqueous solvents (isopropyl alcohol, tert-butyl alcohol, N,N-dimethylformamide and acetonitrile). The half-neutralization potential values and the corresponding pKa values were determined for all cases.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

Synthesis of C2-symmetric trans-2,6-diarylpiperidinones via aryl cuprate addition: an unexpected stereochemical outcome

An efficient procedure for the preparation of trans-2,6-diaryl piperidinones has been developed. Addition of aryl Grignard reagents to 2-aryl dihydropyridones under catalytic copper promoted conditions generates the trans isomer exclusively, an unprecedented stereochemical event. The X-ray structures of both starting material and product have been solved and shed light on the steric constraints and substrate geometry leading to the observed product. The reaction conditions tolerate a variety of aromatic nucleophiles to generate C₂-symmetric products in good overall yields.