Langmuir monolayers of the zwitterionic surfactant hexadecyl 1-N-L-tryptophan glycerol ether

We report the formation of Langmuir monolayers of pure zwitterionic hexadecyl 1-N-L-tryptophan glycerol ether (C(16)-TGE) surfactant and mixed monolayers of cationic-zwitterionic surfactant obtained modifying the pH of the subphase. The pressure-area and surface potential-area isotherms and fluorescence microscopy measurements have been used to characterize the surface phase transitions in the monolayers. These transitions appeared at larger areas as the pH decreased from 6.0 to 2.0 and almost disappeared as the pH decreased further. The analysis of the surface potential and the infrared reflection-absorption spectroscopy data suggests that the phase transition is associated with a change of orientation of both the hydrocarbon chain and the aromatic group of the surfactant with respect to the air-water surface. The surface rheology of the monolayers was studied by quasielastic light scattering and by the oscillatory barrier technique. The results indicate that there is at least one relaxation process in the monolayer.     

Interaction of antimicrobial arginine-based cationic surfactants with liposomes and lipid monolayers

The present work examines the relationship between the antimicrobial activity of novel arginine-based cationic surfactants and the physicochemical process involved in the perturbation of the cell membrane. To this end, the interaction of these surfactants with two biomembrane models, namely, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar lipid vesicles (MLVs) and monolayers of DPPC, 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DPPG), and Escherichia coli total lipid extract, was investigated. For the sake of comparison, this study included two commercial antimicrobial agents, hexadecyltrimethylammonium bromide and chlorhexidine dihydrochloride. Changes in the thermotropic phase transition parameters of DPPC MLVs in the presence of the compounds were studied by differential scanning calorimetry analysis. The results show that variations in both the transition temperature (Tm) and the transition width at half-height of the heat absorption peak (deltaT1/2) were consistent with the antimicrobial activity of the compounds. Penetration kinetics and compression isotherm studies performed with DPPC, DPPG, and E. coli total lipid extract monolayers indicated that both steric hindrance effects and electrostatic forces explained the antimicrobial agent-lipid interaction. Overall, in DPPC monolayers single-chain surfactants had the highest penetration capacity, whereas gemini surfactants were the most active in DPPG systems. The compression isotherms showed an expansion of the monolayers compared with that of pure lipids, indicating an insertion of the compounds into the lipid molecules. Owing to their cationic character, they are incorporated better into the negatively charged DPPG than into zwitterionic DPPC lipid monolayers.     

Probing the Helical Secondary Structure of Short-Chain β-Peptides

Structural prerequisites for the stability of the 3₁ helix of β-peptides can be defined from inspection of models (Figs. 1 and 2): lateral non-H-substituents in 2- and 3-position on the 3-amino-acid residues of the helix are allowed, axial ones are forbidden. To be able to test this prediction, we synthesized a series of heptapeptide derivatives Boc-(β-HVal-β-HAla-β-HLeu-Xaa-β-HVal-β-HAla-β-HLeu)-OMe 13–22 (Xaa = α- or β-amino-acid residue) and a β-depsipeptide 25 with a central (S)-3-hydroxybutanoic-acid residue (Xaa = –OCH(Me)CH₂C(O)–) (Schemes 1 3). Detailed NMR analysis (DQF-COSY, HSQC, HMBC, ROESY, and TOCSY experiments) in methanol solution of the β-hexapeptide H(-β-HVal-β-HAla-β-HLeu)₂-OH ( 1 ) and of the β-heptapeptide H-β-HVal-β-HAla-β-HLeu-(S,S)-β-HAla(αMe)-β-HVal-β-HAla- β-HLeu-OH ( 22 ), with a central (2S,3S)-3-amino-2-methylbutanoic-acid residue, confirm the helical structure of such β-peptides (previously discovered in pyridine solution) (Fig.3 and Tables 1–5). The CD spectra of helical β-peptides, the residues of which were prepared by (retentive) Arndt-Eistert homologation of the (S)- or L -α-amino acids, show a trough at 215 nm. Thus, this characteristic pattern of the CD spectra was taken as an indicator for the presence of a helix in methanol solutions of compounds 13–22 and 25 (including partially and fully deprotected forms) (Figs.4–6). The results fully confirm predicted structural effects: incorporation of a single ‘wrong’ residue ((R)-β-HAla, β-HAib, (R,S)-β-HAla(α Me), or N-Me-β-HAla) in the central position of the β-heptapeptide derivatives A (see 17, 18, 20 , or 21 , resp.) causes the CD minimum to disappear. Also, the β-heptadepsipetide 25 (missing H-bond) and the β-heptapeptide analogs with a single α-amino-acid moiety in the middle ( 13 and 14 ) are not helical, according to this analysis. An interesting case is the heptapeptide 15 with the central achiral, unsubstituted 3-aminopropanoic-acid moiety: helical conformation appears to depend upon the presence or absence of terminal protection and upon the solvent (MeOH vs. MeOH/H₂O).     

FLAVIN-MEDIATED PRODUCTION OF HYDROGEN PEROXIDE IN PHOTOELECTROCHEMICAL CELLS

A photoelectrochemical cell for hydrogen peroxide production using flavin photosystems is described. The anodic solution, which is kept free of oxygen by passing an Ar stream through it, contains the photoreceptor (flavin mononucleotide or lumiflavin) and the electron donor (EDTA, semicarbazide or hydroxylamine), while the peroxide is formed at the electrode of the cathodic solution, whose oxygen content is increased by bubbling with pure oxygen. Among several electrode metals that have been tested (Ag, Pt and Hg), Hg is the most efficient. The pH of the anodic and cathodic solutions should be adjusted to 14 and 1, respectively, for optimum results.     

Time-resolved gas-phase kinetic and quantum chemical studies of the reaction of silylene with nitric oxide

Time-resolved kinetic studies of the reaction of silylene, SiH2, generated by laser flash photolysis of phenylsilane, have been carried out to obtain rate constants for its bimolecular reaction with NO. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF6 bath gas at five temperatures in the range 299-592 K. The second-order rate constants at 10 Torr fitted the Arrhenius equation log(k/cm3 molecule(-1) s(-1)) = (-11.66 +/- 0.01) + (6.20 +/- 0.10 kJ mol(-1))/RT ln 10 The rate constants showed a variation with pressure of a factor of ca. 2 over the available range, almost independent of temperature. The data could not be fitted by RRKM calculations to a simple third body assisted association reaction alone. However, a mechanistic model with an additional (pressure independent) side channel gave a reasonable fit to the data. Ab initio calculations at the G3 level supported a mechanism in which the initial adduct, bent H2SiNO, can ring close to form cyclo-H2SiNO, which is partially collisionally stabilized. In addition, bent H2SiNO can undergo a low barrier isomerization reaction leading, via a sequence of steps, ultimately to dissociation products of which the lowest energy pair are NH2 + SiO. The rate controlling barrier for this latter pathway is only 16 kJ mol(-1) below the energy of SiH2 + NO. This is consistent with the kinetic findings. A particular outcome of this work is that, despite the pressure dependence and the effects of the secondary barrier (in the side reaction), the initial encounter of SiH2 with NO occurs at the collision rate. Thus, silylene can be as reactive with odd electron molecules as with many even electron species. Some comparisons are drawn with the reactions of CH2 + NO and SiCl2 + NO.     

NMR J-based analysis of nitrogen-containing moieties and application to dysithiazolamide, a new polychlorinated dipeptide from Dysidea sp.

The methodology of J-based analysis applied to 1,3-methylcarboamido systems allowed us to deduce the relative configurations of the two leucine-like fragments of a new tetrachloro amino acid derivative dysithiazolamide, which was isolated from an unidentified sponge of the genus Dysidea. Furthermore, the absolute configuration was also proposed by comparison with analogous systems.     

Time shift correction in second-order liquid chromatographic data with iterative target transformation factor analysis

When the generalized rank annihilation method (GRAM) is applied to liquid chromatographic data with diode-array detection, an important problem is the time shift of the peak of the analyte in the test sample. This problem leads to erroneous predictions. This time shift can be corrected if a time window is selected so that the chromatographic profile of the analyte in the test sample is trilinear with the peak of the analyte in the calibration sample. In this paper we present a new method to determine when this condition is met. This method is based on the curve resolution with iterative target transformation factor analysis (ITTFA). The calibration and test matrices are independently decomposed into profiles and spectra, and aligned before GRAM is applied. Here we study two situations: first, when the calibration matrix has one analyte and second, when it has two analytes. When the calibration matrix has two analytes, we selectively determine the time window for the analyte to be quantified. There were considerably fewer prediction errors after correction.     

Homogeneous pyrolysis kinetics of ethyl 3-hydroxy-3-methylbutanoate in the gas phase

The pyrolysis kinetics of ethyl 3-hydroxy-3-methylbutanoate have been examined over the temperature range of 286–330°C and pressure range of 29–108 Torr. In a seasoned vessel and in the presence of the free radical inhibitor cyclohexene or toluene the reaction is homogeneous, unimolecular and obeys a first-order rate law. The elimination products are mainly acetone and ethyl acetate, and very small amounts of ethyl 3-butenoate, acetic acid, ethylene and H₂O. The rate coefficient is expressed by the following equation: log k₁(s^–1)=(12.39±0.46)–(174.5±5.2) kJ mol^–1 (2.303RT)^–1. The mechanism appears to proceed via a six-membered cyclic transition state, where polarization of the (CH₃)C(OH)^+...-CH₂COOCH₂CH₃ bond is rate determining.     

Adsorption modes of cysteine on Au(111): thiolate, amino-thiolate, disulfide

The adsorption of cysteine on the (111) surface of gold has been studied by means of periodic supercell density-functional theory calculations. A number of different adsorption modes are examined, including adsorption through the thiol group in either thiolate or disulfide form, and adsorption through both the thiol and amino functional groups. We find that at intermediate coverage densities the latter mode of adsorption is favored, followed by thiolate adsorption at the bridge (slightly displace toward fcc) site. The N-Au and S-Au bond strengths in the amino-thiolate adsorption are estimated to be of the order of 6 and 47 kcal/mol, respectively. The electronic structure of the different systems is analyzed, with focus on the total and projected density of states, as well as on the detailed character of the electronic states at the interface. States near the Fermi energy are found to have a metal-molecule antibonding character, whereas metal-molecule bonding states mostly occur near the lower edge of the Au-d band.     

Rigid optically-active D2 and D3 macrocycles

The synthesis and characterization of novel optically-active macrocycles, obtained by esterification reaction from a binaphthyl-containing diol and phthalic or terephthalic acids, and possessing overall D2 or D3 symmetry, is described.