Using second-order calibration to identify and quantify aromatic sulfonates in water by high-performance liquid chromatography in the presence of coeluting interferences

We used the Generalized Rank Annihilation Method (GRAM), a second-order calibration method, to quantify aromatic sulfonates in water with high-performance liquid chromatography (HPLC) when interferences coeluted with the analytes of interest. With GRAM, we can quantify in only two chromatographic analyses, one for a calibration sample and one for the unknown sample. The calculated concentrations were not statistically different to those obtained when the chromatographic separation of the unknown sample was modified in order to completely separate the analyte from the interferences before univariate calibration. With GRAM, the concentrations are determined much more quickly because a complete resolution is not required.     

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (Grosses Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.01 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriamine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. Of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that >100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content).     

Study on resolution capacity and secondary mechanisms of three different TSK gels for organic SEC

A comparative study on the elution behavior in size-exclusion chromatography (SEC) of three polymeric TSK gel packings, named H, H(HR), and H(XL) types, is performed. The deviations of the universal calibration (u.c.) curves of seven solvent-polymer systems show evidence that the existence of secondary effects accompanying the main SEC mechanism. These secondary mechanisms are a consequence of the binary enthalpic interactions between the different components of the chromatographic system, such as polymer-solvent, polymer-gel and solvent-gel. However, in the present case, the observed deviations from a unique u.c. curve can mainly be attributed to adsorption of polymeric solutes (analytes) onto the residual moieties of the gel surfaces, (i.e., to polymer-gel interactions). These enthalpic interactions can be quantitated by the values of the distribution coefficient, Kp, which follows the order: Kp (gel H(XL)) > Kp (gel H(HR)) > Kp (gel H). Moreover, the specific resolution of the three types of packings is also estimated, and its comparison yields that Rsp (gel H(HR)) > Rsp (gel H(XL)) > Rsp (gel H), in good agreement with their increasing particle size and decreasing crosslinking degrees. Finally, the errors and inaccuracies committed on the estimation of the sample average molar masses from their respective calibration curves serves the assessment that the packing with lesser secondary mechanisms is the H-type.     

Solid-state versus solution preparation of two crystal forms of [HN(CH2CH2)3NH][OOC(CH2)COOH]2. Polymorphs or hydrogen bond isomers?

The reaction of [N(CH2CH2)3N] with malonic acid [HOOC(CH2)COOH] in the molar 1:2 ratio yields two different crystal forms of the salt [HN(CH2CH2)3NH][OOC(CH2)COOH]2 depending on the preparation technique and crystallization speed: form I, containing malonate anions with intramolecular hydrogen bonds, is obtained by solid-state co-grinding or by rapid crystallization, whereas form II containing intermolecular hydrogen bonds is obtained by slow crystallization. Form I and II do not interconvert, and form I undergoes an order-disorder phase transition on cooling.     

Derivatives of carbohydrazide, thiocarbohydrazide and diaminoguanidine as photometric analytical reagents-I 1,3-bis[(2-pyridyl)methyleneamino]thiourea and 1,3-bis[(2-pyridyl)methyleneamino]guanidine

1,3-Bis[(2-pyridyl)methyleneamino]thiourea (PMAT) and 1,3-bis[(2-pyridyl)methyleneamino]-guanidine (PMAG) have been prepared. They have been examined and characterized by infrared and ultraviolet spectroscopy. A spectrophotometric method has been used for determination of the protonation constants of the reagents. Finally, a spectrophotometric survey has been made of the reactions of various cations with PMAT and PMAG.     

Crystal and molecular structure of a 1:1 complex of a chiral α-d-glucosido-benzo-18-crown-6 and potassium thiocyanate

C₂₈H₃₆O₁₀. KSCN is monoclinic, space groupP2₁ withZ=2,a=10.390(3),b=8.959(7),c=16.377(7) Å, =92.49(5)°. FinalR=0.053 for 1437 reflections measured at room temperature. The K^– ion lies on the least-squares plane formed by the six oxygen atoms in the macrocyclic ring. The SCN^– ion was found on the same face of the macrocycle as the chiral glucopyranoside moiety.Methyl-4,6-O-benzylidene-2,3-O-(1,2-bis(ethoxyethoxy)benzenediyl)--d-glucopyranoside.     

Mechanochemical assembly of hydrogen bonded organic-organometallic solid compounds

Solvent-free reactions with molecular systems have been exploited to prepare hybrid organic-organometallic solids: grinding of the complex [Fe(eta 5-C5H4COOH)2] with solid bases B generates quantitatively the corresponding hydrogen bonded salts [Fe(eta 5-C5H4COOH)(eta 5-C5H4COO)][HB] (B = 1,4-diazabicyclo[2.2.2]octane, 1,4-phenylenediamine); gas-solid reactions are also possible with volatile bases.     

Solid state coordination chemistry of copper(II)/α-hydroxycarboxylato/2,2′-bipyridine systems

Four new two-ligand complexes of copper(II) with 2,2′-bipyridine and one of three different α-hydroxycarboxylic acids (lactic, H₂LACO; 2-methyllactic, H₂MLACO; and mandelic, H₂MANO) were prepared. Complexes 1–3 of general formula [Cu(HL)₂(bipy)]·nH₂O (HL=monodeprotonated acid), were characterized by elemental analysis, IR, electronic and EPR spectroscopy, magnetic measurements and thermogravimetric analysis. Complexes 1 (HL=HLACO, n=2), 2 (HL=HMLACO, n=1) and 3a (the result of attempted recrystallization of 3, of formula [Cu(HMANO)(bipy)₂](HMANO)·H₂MANO·CH₃CN were studied by X-ray diffractometry. The copper atom is in an elongated, tetragonally distorted octahedral environment in 1 and 2 and in 3a has a coordination polyhedron intermediate between a square pyramid and a trigonal bipyramid, as evaluated in terms of the parameter τ. In 1 and 2 the α-hydroxycarboxylato ligand is bidentate and monoanionic but in 3a there are three forms: a monodentate monoanion, a monoanionic counterion, and a neutral molecule.     

Bonding and redox properties of [Os(3)(CO)(9)(tmbp)(L)] (tmbp=4,4',5,5'-tetramethyl-2,2'-biphosphinine; L=CO, PPh(3)) clusters with an unprecedented electron-deficient metallic core and doubly bridging biphosphinine dianion

Herein we describe in detail the bonding properties and electrochemical behavior of the first known triosmium carbonyl clusters with a coordinated redox-active ligand 4,4',5,5'-tetramethyl-2,2'-biphosphinine (tmbp), the phosphorus derivative of 2,2'-bipyridine. The clusters investigated were [Os(3)(CO)(10)(tmbp)] (1) and its derivative [Os(3)(CO)(9)(PPh(3))(tmbp)] (2). The crystal structures of both clusters are compared with those of relevant compounds; they served as the basis for density functional theory (DFT and time-dependent DFT) calculations. The experimental and theoretical data reveal an unexpected and unprecedented bridging coordination mode of tmbp, with each P atom bridging two metal atoms. The tmbp ligand is formally reduced by transfer of two electrons from the triangular cluster core that consequently lacks one of the metal-metal bonds. Both 1 and 2 therefore represent 50e(-) clusters with a coordinated 8e(-) donor, [tmbp](2-). The HOMO and LUMO of 1 and 2 possess a predominant contribution from different pi*(tmbp) orbitals, implying that the lowest energy excited state possesses a significant intraligand character. This is in agreement with the photostability of these clusters. DFT calculations also predict the experimentally observed structure of 1 to be the most stable one in a series of several plausible structural isomers. Stepwise two-electron electrochemical reduction of 1 and 2 results in dissociation of CO and PPh(3), respectively, and formation of the [Os(3)(CO)(9)(tmbp)](2-) ion. The initially produced radical anions of the parent clusters, in which the odd electron is predominantly localized on the tmbp ligand, are sufficiently stable at low temperatures and can be observed with IR spectroelectrochemistry. The electron-deficiency of the cluster core in 1 permits facile electrocatalytic substitution of a CO ligand by tertiary phosphane and phosphite donors.     

Hyperpigmentation induced by topical 5-aminolaevulinic acid plus visible light

Photodynamic therapy (PDT) with 5-aminolaevulinic acid (ALA) is an alternative tool for the treatment of superficial non-melanoma skin cancers. Recently ALA-PDT has been employed with encouraging results also for warts, condylomata and psoriasis. In this study the effects of topical ALA plus irradiation with visible light on intact human skin have been evaluated. Five skin areas (A, B, C, D, and E) on the inner upper part of the arms of five healthy volunteers (skin types III and IV) were treated with (A) ALA 20% in base cream without irradiation, (B) only the vehicle (base cream) without ALA, (C, D and E) ALA cream at the concentrations of 5, 10 and 20%, respectively; all treatments were applied with an occlusive dressing. Four hours after ALA or vehicle application areas B, C, D and E were irradiated with a fixed dose of 40 J/cm(2). ALA penetration through the intact skin was evaluated by in vivo fluorescence determination. The effects on healthy skin were evaluated by clinical and chromometric examinations, light microscopy, immunohistochemistry and electron microscopy. RESULTS: (1) in vivo fluorescence demonstrated that ALA is able to penetrate through the intact skin, when applied with occlusive dressing and induces a classical fluorescence peak due to Protoporphyrin IX (PpIX) formation, which is the active photosensitiser. (2) Skin areas receiving ALA plus irradiation showed erythema and swelling just after the irradiative session and hyperpigmentation 48-72 h later. (3) Colourimetric data confirmed significant skin colour changes: values a* (representing the erythematous changes) increased only on the skin areas where ALA+irradiation were applied and during the 48 h after irradiation, thereafter a* began to decrease; values L* (pigmentation) increased during the 2 weeks following treatment. (4) Histopathological, immunohistochemical (S100, HMB-45) and electron microscopic findings showed an absolute increment of the number of melanocytes, which appeared clearly activated. In conclusion the application of ALA cream followed by irradiation is able to induce a pigmentation response in healthy human skin, at least in skin types III and IV. This melanocytic activation could have a potential for the treatment of skin disorders characterised by hypopigmentation.