A Promising Electrochemical Platform for Dopamine and Uric Acid Detection Based on a Polyaniline/Iron Oxide-Tin Oxide/Reduced Graphene Oxide Ternary Composite

A ternary polyaniline/Fe₂O₃-SnO₂/reduced graphene oxide (PFSG) nanocomposite was prepared using a simple two-step hydrothermal treatment. The composite was applied as a glassy carbon electrode modifier (GCE) to enhance dopamine (DA) and uric acid (UA) detection. The ternary PFSG composite was compared with its binary precursor Fe₂O₃-SnO₂/reduced graphene oxide (FSG). The influence of the modified GCE electrodes on their performance as a sensing platform was determined. GCE/PFSG showed better sensing parameters than GCE/FSG due to the introduction of polyaniline (PANI), increasing the electrocatalytic properties of the electrode towards the detected analytes. GCE/PFSG enabled the detection of low concentrations of DA (0.076 µM) and UA (1.6 µM). The peak potential separation between DA and UA was very good (180 mV). Moreover, the DA oxidation peak was unaffected even if the concentration of UA was ten times higher. The fabricated sensor showed excellent performance in the simultaneous detection with DA and UA limits of detection: LOD_DA = 0.15 µM and LOD_UA = 6.4 µM, and outstanding long-term stability towards DA and UA, holding 100% and 90% of their initial signals respectively, after one month of use.     

The Identification of Cotton Fibers Dyed with Reactive Dyes for Forensic Purposes

Some of the most common microtraces that are currently collected at crime scenes are fragments of single fibers. The perpetrator leaves them at a crime scene or takes them away, for example, on their clothing or body. In turn, the microscopic dimensions of such traces mean that the perpetrator does not notice them and therefore usually does not take action to remove them. Cotton and polyester fibers dyed by reactive and dispersion dyes, respectively, are very popular within clothing products, and they are hidden among microtraces at the scene of a crime. In our recently published review paper, we summarized the possibilities for the identification of disperse dyes of polyester fibers for forensic purposes. In this review, we are concerned with cotton fibers dyed with reactive dyes. Cotton fibers are natural ones that cannot easily be distinguished on the basis of morphological features. Consequently, their color and consequently the dye composition are often their only characteristics. The presented methods for the identification of reactive dyes could be very interesting not only for forensic laboratories, but also for scientists working in food, cosmetics or pharmaceutical/medical sciences.     

pH-Responsive N^C-Cyclometalated Iridium(III) Complexes: Synthesis,Photophysical Properties,Computational Results,and Bioimaging Application

Herein we report four [Ir(N^C)₂(L^L)]ⁿ⁺, n = 0,1 complexes (1–4) containing cyclometallated N^C ligand (N^CH = 1-phenyl-2-(4-(pyridin-2-yl)phenyl)-1H-phenanthro[9,10-d]imidazole) and various bidentate L^L ligands (picolinic acid (1), 2,2′-bipyridine (2), [2,2′-bipyridine]-4,4′-dicarboxylic acid (3), and sodium 4,4′,4″,4‴-(1,2-phenylenebis(phosphanetriyl))tetrabenzenesulfonate (4). The N^CH ligand precursor and iridium complexes 1–4 were synthesized in good yield and characterized using chemical analysis, ESI mass spectrometry, and NMR spectroscopy. The solid-state structure of 2 was also determined by XRD analysis. The complexes display moderate to strong phosphorescence in the 550–670 nm range with the quantum yields up to 30% and lifetimes of the excited state up to 60 µs in deoxygenated solution. Emission properties of 1–4 and N^CH are strongly pH-dependent to give considerable variations in excitation and emission profiles accompanied by changes in emission efficiency and dynamics of the excited state. Density functional theory (DFT) and time-dependent density functional theory (TD DFT) calculations made it possible to assign the nature of emissive excited states in both deprotonated and protonated forms of these molecules. The complexes 3 and 4 internalize into living CHO-K1 cells, localize in cytoplasmic vesicles, primarily in lysosomes and acidified endosomes, and demonstrate relatively low toxicity, showing more than 80% cells viability up to the concentration of 10 µM after 24 h incubation. Phosphorescence lifetime imaging microscopy (PLIM) experiments in these cells display lifetime distribution, the conversion of which into pH values using calibration curves gives the magnitudes of this parameter compatible with the physiologically relevant interval of the cell compartments pH.     

Selective Synthesis of 2,5‐Diformylfuran by Sustainable 4‐acetamido‐TEMPO/Halogen‐Mediated Electrooxidation of 5‐Hydroxymethylfurfural

A new method was developed for the selective gram‐scale synthesis of 2,5‐diformylfuran (DFF), which is an important chemical with a high application potential, via oxidation of biomass‐derived 5‐hydroxylmethylfurfural (HMF) catalyzed by 4‐acetylamino‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (4‐AcNH‐TEMPO) in a two‐phase system consisting of a methylene chloride and aqueous solution containing sodium hydrogen carbonate and potassium iodide. The key feature of this method is the generation of the I₂ (co‐)oxidant by anodic oxidation of iodide anions during pulse electrolysis. In addition, the electrolyte can be successfully recycled five times while maintaining a 62–65 % yield of DFF. This novel method provides a sustainable pathway for waste‐free production of DFF without the use of metal catalysts and expensive oxidants. An advantage of electrooxidation is utilized in the preparation of demanding chemical.     

Parallel two-photon photopolymerization of microgear patterns

We report parallel two-photon photopolymerization of microgear patterns by exposing a photoresist to holographically generated optical vortices. The optical vortices are created by imparting a helical pitch onto the incident light using a programmable lithographic phase mask realized with a computer addressable phase-only spatial light modulator. By varying the phase levels of the spatial light modulator, the truncated helical phase of an optical vortex results in output intensity patterns that typifies that of microgears instead of perfect doughnut beams. Our experiments and simulations are in good agreement implying a more efficient and highly parallel two-photon photopolymerization scheme that can be subsequently used for non-scanning fabrication of microgears.     

Self‐assembly of well‐defined amphiphilic polymeric miktoarm stars,dendrons, and dendrimers in water: The effect of architecture

Five polymeric architectures with a systematic increase in architectural complexity were synthesized by “click” reactions from a toolbox of functional linear polymers and small molecule linkers. The amphiphilic architectures ranged from a simple 3‐miktoarm star block copolymer to the more complex third generation dendrimer‐like block copolymer, consisting of polystyrene (PSTY) and polyacrylic acid (PAA). Micellization of these architectures in water at a pH of 7 under identical ionic strength gave spherical micelles ranging in size from 9 to 30 nm. Subsequent calculations of the PSTY core density, average surface area per PAA arm on the corona‐core interface, and the relative stretching of the PAA arms provided insights into the effect of architecture on the self‐assembly processes. A particular trend was observed that with increased architectural complexity the hydrodynamic diameter, radius of the core in the dry state and the aggregation number also increased with the exception of the third generation dendrimer. On the basis of these observations, we postulate that thermodynamic factors controlling self‐assembly were the entropic penalty of forming PSTY loops in the core counterbalanced by the reduction in repulsive forces through chain stretching. This results in a greater number of aggregating unimers and consequently larger micelle sizes. The junction points within the architecture also play an important role in controlling the self‐assembly process. The G3 dendrimer showed results contradictory to the aforementioned trend. We believe that the self‐assembly process of this architecture was dominated by the increased attractive forces due to stretching of the PSTY core chains to form a more compact core. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6292–6303, 2009     

A Novel Streptavidin–luciferase Fusion Protein: Preparation,Properties and Application in Hybridization Analysis of DNA

A streptavidin–luciferase fusion protein comprising the thermostable mutant form of firefly luciferase Luciola mingrelica and minimal core streptavidin was constructed. The streptavidin–luciferase fusion was mainly produced in a tetrameric form with high luciferase and biotin‐binding activities. It was shown that fusion has the same K_m values for ATP and luciferin and the bioluminescence spectra as initial luciferase. The linear dependence of the bioluminescence signal on the content of the fusion was observed within the range of 10^?18–10^?13 mol per well. Successful application of obtained fusion in a biospecific bioluminescence assay based on biotin–streptavidin interactions was demonstrated by the example of a specific DNA hybridization analysis. A DNA hybridization analysis for Escherichia coli cells identification was developed using unique for these cells gadB fragment encoding glutamate decarboxylase. The amplified biotinylated GadB fragments were hybridized with the immobilized oligonucleotide probes; then, the biotin in the DNA duplexes was detected using the streptavidin–luciferase fusion protein. To reach the high sensitivity of the assay, we optimized the conditions of the assay. It was shown that the use of Pluronic for plate modification resulted in a significant reduction in the DNA detection limit which finally was 0.4 ng per well.     

Nonlinear optoacoustic transformation in the system of dielectric substrate/submicron metal coating/liquid

The optoacoustic method has been shown to be an accurate technique for the measurement of the properties of submicron metal coatings deposited on a dielectric substrate, i.e., mirrors. The method has been previously theoretically described in terms of a linear model of optoacoustic transformation in a system substrate/coating/liquid. The goal of the present work was to determine the limits at which the linear model is still applicable. The modification of the laser induced acoustic signal profiles and transfer functions of optoacoustic transformation versus the laser fluence was studied for two liquids: ethanol and water.     

Stability of isoperimetric type inequalities for some Monge–Ampère functionals

We investigate the stability of some inequalities of isoperimetric type related to Monge–Ampère functionals. In particular, firstly we prove the stability of a reverse Faber–Krahn inequality for the Monge–Ampère eigenvalue and its generalization. Then we give a stability result for the Brunn–Minkowski inequality and for a consequent Urysohn’s type inequality for the so-called \(n\) -torsional rigidity, a natural extension of the usual torsional rigidity.     

Base-free aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over Pt/C catalysts synthesized by pulse alternating current technique

The Pt/C catalysts with various Pt content (5-30 wt%) synthesized via electrochemical pulse alternating current technique have been evaluated for the base-free aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid. The higher Pt content in the catalyst (30 wt%) provides the product yield up to 65% upon performing the process in concentrated (～0.1 M) aqueous solutions of the substrate.