Dark and Photochemical Interactions of Dimethyltetrahydrobenzoangelicin with DNA

A study of dark interaction and photoreaction between 4,6-dimethyltetrahydrobenzoangelicin (THBA) and DNA is described. 4,6-Dimethyltetrahydrobenzoangelicin is a furocoumarin derivative in which 4'and 5'carbons are linked by a four-methylene bridge. In spite of the bulky aliphatic ring, THBA forms a complex with DNA in the dark and, on UVA irradiation, reacts with pyrimidine bases of DNA yielding monoadducts only involving its furan side double bond. Two main photoproducts form: they derive from a C₄-cycloaddition to thymine and cytosine, respectively, and account for 56% and 39% of the total photoreaction yield. Both show cis-syn configuration. Two other isomers, one with thymine and one with cytosine, formed with so much lower yield ( ca 3 and 1%, respectively) that their structure could not be assigned. Furthermore, in spite of its angular structure, THBA induces a small number of crosslinks in DNA.     

Mass spectrometric characterization of two novel inflammatory peptides from the venom of the social wasp Polybia paulista

The social wasp P. paulista is relatively common in southeast Brazil causing many medically important stinging incidents. The seriousness of these incidents is dependent on the amount of venom inoculated by the wasps into the victims, and the characteristic envenomation symptoms are strongly dependent on the types of peptides present in the venom. In order to identify some of these naturally occurring peptides available in very low amounts, an analytical protocol was developed that uses a combination of reversed-phase and normal-phase high-performance liquid chromatography (HPLC) of wasp venom for peptide purification, with matrix-assisted laser desorption/ionization time-of-flight post-source decay mass spectrometry (MALDI-Tof-PSD-MS) and low-energy collision-induced dissociation (CID) in a quadrupole time-of-flight tandem mass spectrometry (QTof-MS/MS) instrument for peptide sequencing at the sub-picomole level. The distinction between Leu and Ile was achieved both by observing d-type fragment ions obtained under CID conditions and by comparison of retention times of the natural peptides and their synthetic counterparts (with different combinations of I and/or L at N- and C-terminal positions). To distinguish the isobaric residues K and Q, acetylation of peptides was followed by Q-Tof-MS analysis. The primary sequences obtained were INWLKLGKMVIDAL-NH(2) (MW 1611.98 Da) and IDWLKLGKMVMDVL-NH(2) (MW 1658.98 Da). Micro-scale bioassay protocols characterized both peptides as presenting potent hemolytic action, mast cell degranulation, and chemotaxis of polymorphonucleated leukocyte (PMNL) cells. The primary sequences and the bioassay results suggest that these toxins constitute members of a new sub-class of mastoparan toxins, directly involved in the occurrence of inflammatory processes after wasp stinging.     

Human topoisomerase I poisoning: docking protoberberines into a structure-based binding site model

Summary Using the X-ray crystal structure of the human topoisomerase I (top1) – DNA cleavable complex and the Sybyl software package, we have developed a general model for the ternary cleavable complex formed with four protoberberine alkaloids differing in the substitution on the terminal phenyl rings and covering a broad range of the top1-poisoning activities. This model has the drug intercalated with its planar chromophore between the −1 and +1 base pairs flanking the cleavage site, with the nonplanar portion pointing into the minor groove. The ternary complexes were geometry-optimized and relative interaction energies, computed by using the Tripos force field, were found to rank in correct order the biological potency of the compounds; in addition, the model is also consistent with the top1-poisoning inactivity of berberine, a major prototype of the protoberberine alkaloids. The model might serve as a rational basis for elaboration of the most active compound as a lead structure, in order to develop more potent top1 poisons as next generation anti-cancer drugs.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

A computer program for searching the best model for describing different experimental systems

An algorithm for searching the best polynomial analytical function for describing different experimental systems is presented. It is based

1. (1)on the generation of all possible analytical functions of a given order, with a given number of terms and with a given number of independent variables, and

2. (2)on the calculation of the parameters of all selected functions using the linear regression method.

To show the ability of the program two different examples are given:

1. (1) searching the best univariate polynomial model, and

2. (2) modelling of the stability of a two-component mixture as a function of three factors.

Simultaneous Determination of Trichothecenes A, B, and D in Maize Food Products by LC–MS–MS

Two new methods of analysis, based on liquid chromatography–tandem mass spectrometry, for simultaneous determination of trichothecenes A, B, and D in maize flour and oil have been developed and validated in accordance with European Commission decision 2002/657/EC (recovery, CCα, CCβ, and precision). The trichothecenes were extracted from maize flour by matrix solid-phase dispersion, with recoveries ≥79%, and from maize oil by liquid–liquid extraction, with recoveries ≥78%. Limits of quantitation ranged between 0.03 and 50 μg kg^?1, depending on the electrospray response to each analyte and on the matrix. Monitoring of flour and oil samples with this HPLC–MS–MS method revealed the presence of deoxynivalenol, T-2 toxin, and diacetoxyscirpenol at very low concentrations.     

Capillary isotachophoresis of some isoquinoline alkaloids

The isotachophoretic behavior of quaternary benzo/c/phenanthridine, protoberberine and aporphine alkaloids in different electrolyte systems is described. The concentration of the leading ion and the pH value of the leading electrolyte affect the relative effective mobilities of the alkaloids. The system of pH 4.7, containing the leading ion K⁺ (0.005 M) counter ion acetate, and the terminating ion β-alanine (0.02 M), has been selected for the quantitative determination of the studied alkaloids in model mixtures and plant extracts.     

Simultaneous determination of the urinary metabolites of benzene, toluene, xylene and styrene using high-performance liquid chromatography/hybrid quadrupole time-of-flight mass spectrometry

A simple and rapid method using reversed-phase liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the simultaneous determination of the urinary metabolites of benzene, toluene, xylene and styrene in human urine specimens and standard solutions is described. A hybrid quadrupole/time-of-flight (QqTOF) mass spectrometer was compared for the determination of metabolite of aromatic solvents in urine samples. The metabolites selected were: trans,trans-muconic acid, hippuric acid, o-, m- and p-methylhippuric acid and phenylglyoxylic acid. The compounds were well separated from each other on narrow-bore 1-mm i.d. reversed-phase LC C-18 columns. Average recoveries for loading 100 microL of urine samples varied from 88-110% and the quantification limits were less than 30 ng/mL for each analyte (3 ng/mL for trans,trans-muconic acid). The qualitative information obtained (mass accuracy, resolution and full-scan spectra) with the QqTOF mass spectrometer allows a secure identification of analytes in biological matrices.     

Determination of metal concentration in fat supplements for swine nutrition by atomic absorption spectroscopy

The presence of some essential and toxic metals in fat supplements for swine diet was investigated. Collected samples represented a relevant production of the Italian industry. In particular, some samples were enriched with antioxidants or waste cooking oils. The method for the determination of Ca, Cu, Cd, Fe, Mg, Mn, Ni, Pb, and Zn in fat samples was developed by means of a certified reference material (CRM 186) and a representative fatty sample (RFS). All samples were digested in closed vessels in a microwave oven and then analyzed by flame atomic absorption or graphite furnace atomic absorption spectrometry. The entire analytical method provided a satisfactory repeatability and reproducibility confirmed by agreement between the experimental recovery data obtained for the CRM 186 sample and, with the method of standard additions, for the RFS material. The samples generally showed a small amount of metals compared with the recommended daily intake for the essential elements. On the other hand, some samples contained a significant concentration, from an analytical point of view, of Cd, Ni, and Pb. Principal component analysis (PCA) was applied to inspect the experimental data obtained from samples analysis. Basically no differences were detected in terms of metal concentration among the fat supplements analyzed.     

Nucleic acid analysis using an expanded genetic alphabet to quench fluorescence

Organic chemistry has made possible the synthesis of molecules that expand on Nature's genetic alphabet. Using the previously described nonstandard DNA base pair constructed from isoguanine and 5-methylisocytosine, we report a highly specific and sensitive method that allows for the fast and specific quantitation of genetic sequences in a closed tube format. During PCR amplification, enzymatic site-specific incorporation of a quencher covalently linked to isoguanine allows for the simultaneous detection and identification of multiple targets. The specificity of method is then established by analysis of thermal denaturation or melting of the amplicons. The appropriate functions of all reactions are further verified by incorporation of an independent target into the reaction mixture. We report that the method is sensitive down to the single copy level, and specificity is demonstrated by multiplexed end-point genotypic analysis of four targets simultaneously using four separate fluorescent reporters. The method is general enough for quantitative and qualitative analysis of both RNA and DNA using previously developed primer sets. Though the method described employs the commonly used PCR, the enzymatic incorporation of reporter groups into DNA site-specifically should find broad utility throughout molecular biology.