Practical and efficient applications of novel dioxaborolanes and dioxaborinanes in the synthesis of corresponding boronates and their use in the palladium-catalyzed cross coupling reactions

The syntheses of boronates derived from the reaction of dioxaborolanes and dioxaborinanes with either organolithium or organomagnesium reagents are investigated along with their subsequent use in the palladium cross coupling reaction. The intrinsic stability of these cyclic esters contributes to their facile reaction with both lithium and magnesium nucleophiles at mild and safe conditions. We have found that many of the reactions proceed at room temperature which is a significant improvement over the traditional routes which require cryogenic temperatures. The scope of these reactions and their practical application to large scale process synthesis is described.     

Line intensities of acetylene: New measurements in the 1.5-μm spectral region and global modelling in the ΔP=10 series

Using the Fourier transform spectra of the acetylene molecule recorded near 1.5-μm, the intensities of 111 lines belonging to seven hot bands of the main isotopologue ¹²C₂H₂ have been retrieved by means of a multispectrum fitting procedure. Considering the density of lines in the spectra, and the fact that the measured bands are the weakest observed, the accuracy of the measurements is around 10%. At first stage, an empirical treatment of these data has been performed, leading to the vibrational transition dipole moment squared and some Herman–Wallis coefficients. Then the measured line intensities of this work and collected ones from the literature have been treated simultaneously within the framework of the effective operator approach.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.     

N-Cyanoimides via the Cyanation of Imides

The conversion of cyclic imides to the corresponding N-cyanoimides has been carried out using cyanogen bromide as the nitrile source. This methodology provides a convenient route for the preparation of both aromatic and aliphatic N-cyanoimides.     

Synergistic effect between TiO2 sol–gel and Degussa P25 in dye photodegradation

The TiO₂ powders were synthesized by versatile and low cost sol–gel process using HNO₃ and titanium tetra-isopropoxide (volumetric ratio of 4:1) following by the hydrolysis reaction. The powders show the two polymorphs of TiO₂: 96 % anatase and 4 % brookite, due to acidic condition (pH = 3). Thin films of titanium oxide were obtained by dip-coating, using the sol–gel of titanium oxide mixed with commercial Degussa P25 into a weight ratio 1:1 or 1:1.5, to enhance the synergistic effect of anatase/rutile ratio aiming at increasing the efficiency of the TiO₂ photocatalyst in dyes degradation. The thin film surface (charge and morphology) was controlled by polymer (poly-ethylene glycol) and surfactant (Sodium dodecyl sulphate, Triton X100) addition. The titanium oxide was characterized by particle size analyzer, contact angle measurements, X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The photocatalytic properties of powders and coatings were evaluated based on the degradation efficiency of two reference dyes (methyl orange and methylene blue). The results outline that poly(ethylene glycol) and films morphologies are the most influential factors that affecting the photocatalytic activity.     

Biomonitoring of infant exposure to phenolic endocrine disruptors using urine expressed from disposable gel diapers

Infant exposure to endocrine disruptors (EDs) may cause adverse health effects because of their fast growth and development during this life stage. However, collecting urine from infants for exposure assessment using biological monitoring is not an easy task. For this purpose, we evaluated the feasibility of using urine expressed from disposable gel absorbent diapers (GADs) as a matrix for biomonitoring selected phenolic EDs. GADs urine was expressed with the assistance of CaCl₂ and was collected using a device fabricated in our laboratory. The analytes were extracted and concentrated using a liquid-liquid method and their hydroxyl groups were modified by dansyl chloride to enhance their chromatography and detection. Finally, the analytes were measured by high-performance liquid chromatography (HPLC) coupled with electrospray ionization (ESI) tandem mass spectrometry (MS/MS). The target chemicals were bisphenol A, triclosan, 17 α-ethynylestradiol, the natural hormone estrone, and 17 β-estradiol. The ratio of the CaCl₂ to the urine-wetted gel absorbent, variation of the inter-urination volume, and analyte deposition bias in the diaper were assessed. Analyte blank values in the diapers, the sample storage stabilities, and recoveries of the analytes were also evaluated. The results showed that 70–80 % of the urine could be expressed from the diaper with the assistance of CaCl₂ and 70.5–124 % of the spiked analytes can be recovered in the expressed urine. The limits of detections (LODs) were 0.02–0.27 ng/mL, well within the range for detection in human populations. Our pilot data suggest that infants are widely exposed to the selected EDs.     

The Berkeley Center for Structural Biology at the Advanced Light Source

The Berkeley Center for Structural Biology (BCSB) operates and develops a suite of protein crystallography beamlines at the Advanced Light Source (ALS) located at Lawrence Berkeley National Laboratory (LBNL). Although the ALS was conceived as a low-energy (1.9-GeV), third-generation synchrotron source of vacuum ultraviolet (VUV) and soft X-ray radiation, it was realized during the development of the facility in the mid-1990s that a multipole wiggler coupled with brightness-preserving optics would result in a beamline whose performance in the energy range of 5 to 15 keV would be sufficient for most protein crystallographic experiments. Later, the hard X-ray capabilities of the ALS were expanded by the addition of three superconducting bending magnets, resulting in additional protein crystallography facilities at the ALS [1 A.A. MacDowell, J Synchrotron Radiation 11(6), 447–55 (2004).[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]].     

Studies on thermal,spectral, magnetic and biological properties of new Ni(II), Cu(II) and Zn(II) complexes with a bismacrocyclic ligand bearing an aromatic linker

Novel complexes of M₂LCl₄·nH₂O type (M:Ni, n = 4; M:Cu, n = 3 and M:Zn, n = 0; L: ligand resulted from 1,4-phenylenediamine, 3,6-diazaoctane-1,8-diamine and formaldehyde one-pot condensation) were synthesized and characterised by microanalytical, ESI–MS, IR, UV–Vis, ¹H NMR and EPR spectra, magnetic data at room temperature and molar conductivities as well. The electrochemical behaviour of complexes was investigated by cyclic voltammetry. Simultaneous TG/DTA measurements were performed in order to evidence the thermal behaviour of the obtained complexes. Processes such as water elimination, fragmentation and oxidative degradation of the organic ligand as well as chloride elimination occurred during thermal decomposition. The antimicrobial assays demonstrate that the compounds exhibited good antibacterial activity, especially against S. aureus and E. coli strains, the most active being the copper(II) complex, which also exhibited the most prominent anti-biofilm effect, suggesting its potential use for the development of new antimicrobial agents. The biological activity was correlated with log P _ow values. All complexes disrupt the membrane integrity of HCT 8 tumour cells.