Positron/positronium annihilation in nanocrystalline silicon thin films

Positron and positronium annihilation investigations were applied to nanocrystalline silicon (nc-Si) thin films, for the first time. The nc-Si thin films with average grain diameters of 3–5 nm show intense blue luminescence at room temperature. The nanometer-sized Si crystallites formed in amorphous Si (a-Si) matrix give rise to this luminescence. Very highS-parameters up to 0.62 were observed in the as-grown a-Si thin film suggesting positronium formation in the a-Si layer. The average lifetime of the positrons in the a-Si was determined to be about 520 ps. TheS-parameters dropped significantly to 0.53 by crystallization of the thin film at 800 °C for 10 seconds, which was almost the same to the value observed in bulk Si (100) substrate. Further crystallization from 60 seconds to 1 hour showed smaller change in theS-parameters than that from the a-Si to 10 seconds. The large change in theS-parameters due to the annealing might be caused by the formation of Si nanocrystallites in a-Si matrix suggesting that positron is a sensitive probe for structural investigations of the nc-Si materials.     

Microwave assisted hydrothermal synthesis of tin niobates nanosheets with high cycle stability as lithium-ion battery anodes

SnNb₂O₆ and Sn₂Nb₂O₇ nanosheets were synthetized via microwave assisted hydrothermal method, and innovatively employed as anode materials for lithium-ion battery. Compared with Sn₂Nb₂O₇ and the previously reported pure Sn-based anode materials, the SnNb₂O₆ electrode exhibited outstanding cycling performance.     

混配型配合物Ni(mnt)(bipyO2)的合成与气敏性能

以cis-1,2-二氰基乙烯-1,2-二硫醇钠(Na2(mnt))、2,2′-联吡啶-1,1′-二氧化物(bipyO2)和NiCl2为原料,合成了一种具有大共轭体系的混配型配合物.用元素分析、差热 热重分析、摩尔电导、红外和紫外光谱对配合物进行表征.该配合物化学式为Ni(mnt)(bipyO2),平面正方形结构,属电中性物质,热分解温度高于335 ℃.不溶于水和常规有机溶剂,可溶于DMSO.该配合物是一种氨敏材料,用它制作的传感器对氨气具有良好的敏感性和选择性;当工作电压为10 V时,在氨气浓度小于2.6 mmol•L－1的范围,传感器的输出信号对氨气呈线性响应.传感器的平均回收率为100.2％,响应时间为20 s,恢复时间为45 s.可用于微量氨的定量分析.     

Synthesis and Characterization of p—[Perfluoro—1—（2—fluorosulfonylethoxy）]ethylated Polystyrene

A new fluorinated polystyrene bearing a p-sulbstiuted perfluoro[1-(2-fluorosulfonylethoxy)]ethyl group was synthesized via one-electron oxidation of polystyrene by perfluoro[2-(2-fluorosulfonylethoxy)]propionyl peroxide at different peroxide to polystyrene molar ratios.The yield of perfluoroalkylation decreases with the increase of the reactant molar ratio.The modified polymer has been characterized by various techniques:the ring pefluoro[1-(2-fluorosulfonylethoxy)]ethylation has been proved by FT-IR and ^19FNMR;the X-ray photoelectron spectra(XPS) show the maximum binding energy of F18,O18,C18(two kinds of carbon atoms,namely C-H and C-F)and S2p,respectively; desulfonylation of the fluorinated polystyrene appearing at 217℃ has been found by its thermogravimetric analysis (TGA).The determinations of contact angle,refractive index and glass transition temperature of the modified polymer have disclosed that when the contact angle increases with the increase of the molar ratio,the refractive index and glass transition temperature decrease.The polydispersity values indicate that the degradation of the polymer chains did not occur during the reaction.     

Novel fragmentation of N-diisopropyloxyphosphoryl dipeptides and tripeptides by fast atom bombardment mass spectrometry

Positive ion fast atom bombardment mass spectrometry of N-diisopropyloxyphosphoryl dipeptides and tripeptides showed a novel cleavage pattern in that only the N-phosphoryl fragment ions gave intense peaks while the C-terminal series of ions was suppressed. The base peak was the N-phosphoryl imino ion responding to the N-terminal residue. These advantages are superior to those of other types of N-protecting groups.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Fe(bpb)(CN)2]- as a versatile building block for the design of novel low-dimensional heterobimetallic systems: synthesis, crystal structures, and magnetic properties of cyano-bridged Fe(III)-Ni(II) complexes [(bpb)(2-) = 1,2-bis(pyridine-2-carboxamido)benzenate

A dicyano-containing [Fe(bpb)(CN)2]- building block has been employed for the synthesis of cyano-bridged heterometallic Ni(II)-Fe(III) complexes. The presence of steric bpb(2-) ligand around the iron ion results in the formation of low-dimensional species: five are neutral NiFe2 trimers and three are one-dimensional (1D). The structure of the 1D complexes consists of alternating [NiL]2+ and [Fe(bpb)(CN)2]- generating a cyano-bridged cationic polymeric chain and the perchlorate as the counteranion. In all complexes, the coordination geometry of the nickel ions is approximately octahedral with the cyano nitrogen atoms at the trans positions. Magnetic studies of seven complexes show the presence of ferromagnetic interaction between the metal ions through the cyano bridges. Variable temperature magnetic susceptibility investigations of the trimeric complexes yield the following J(NiFe) values (based on the spin exchange Hamiltonian H = -2J(NiFe) S(Ni) (S(Fe(1)) + S(Fe(2))): J(NiFe) = 6.40(5), 7.8(1), 8.9(2), and 6.03(4) cm(-1), respectively. The study of the magneto-structural correlation reveals that the cyanide-bridging bond angle is related to the strength of magnetic exchange coupling: the larger the Ni-N[triple bond]C bond angle, the stronger the Ni- - -Fe magnetic interaction. One 1D complex exhibits long-range antiferromagnetic ordering with T(N) = 3.5 K. Below T(N) (1.82 K), a metamagnetic behavior was observed with the critical field of approximately 6 kOe. The present research shows that the [Fe(bpb)(CN)2]- building block is a good candidate for the construction of low-dimensional magnetic materials.     

SCATTERING FUNCTION OF POLYMER BLENDS

For a system of flexible polymer molecules, the concepts of two concentrations, namely the segmental and the molecular concentrations, have been proposed in this paper. The former is equivalent to the volume fraction. The latter can be defined as the number of the gravity centers of macromolecules in a unit volume. The two concentrations should be correlated with each other by the conformational function of the polymer chain and should be discussed in different thermodynamic equations. On the basis of these concepts it has been proved that the Flory-Huggins entropy of mixing should be the result of the mixing “ideal gases of the gravity centers of macromolecules“. The general correlation between the free energy of mixing and the scattering function (structural factor) of polymer blends has been studied based on the general fluctuation theory. When the Flory-Huggins free energy of mixing is adopted, the de Gennes scattering function of a polymer blend can be derived.     

Furostanol saponins with inhibitory action against COX-2 production from Tupistra chinensis rhizomes

Two furostanol saponins were obtained from the n-butanol fraction of methanol extract from Tupistra chinensis rhizomes,a folk medicine of Shennongjia Forest District of Hubei Province.Their structures were determined as (25S)-26-O-(β-D-glucopyranosyl)- furost-1β,3β,22α,26-tetrol-3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glucopyranoside (1) and (25R)- 26-O-(β-D-glucopyranosyl)-furost-1β,3β22α,26-tetrol 3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glu- copyranoside (2),on basis of chemical and spectroscopic evidences.1 and 2 displayed marked inhibitory action towards COX-2 production in macrophages of the rat abdomen induced by LPS at 20μg/mL.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.