Self－assembly of Novel Hetero[3]rotaxane, [2]Rotaxanes and [2]Catenane

One linear template 13 and one cyclophane template 15, both incorporating two electron rich 1,4‐dialkoxybenzene units and one diamide unit, have been synthesized. By utilizing donor‐acceptor interaction and/or intermolecular hydrogen bonding assembling principles, one novel hetero[3]rotazane 22·4Cl, possessing one neutral and one tetracationic ring components, has been synthesized from 13, through neutral [2]rotaxane 21 as intermediate. With 15 as template, tetracationic [2]catenane 23·4PF₆ was assembled by using donor‐acceptor interaction, but no neutral [2]rotaxane could be obtained under the typical conditions of hydrogen bonding assembling principle. The interlocked supramolecular compounds have been characterized and their spectral properties are investigated.     

Fabrication and characterization of hexagonal mesoporous silica monolith via post-synthesized hydrothermal process

Large-sized, optical transparent mesostructured Brij 56/silica monolith has been fabricated using a lyotropic liquid crystal of Brij 56 (C₁₆EO₁₀) as a template and TMOS as a silica source, combined with a optimizing sol-gel process and a hydrothermal aging process. By programmed temperature drying and calcinations, translucent mesoporous silica monolith with two-dimensional hexagonal structure (P6mm) has bee obtained. The ordered mesoporous silica monoliths have been characterized by small-angle X-ray diffraction, transmission electron microscopy (TEM), and nitrogen adsorption, which shows that the materials have a highly ordered two-dimensional hexagonal mesostructure with the high specific surface area of 837 m² · g⁻¹ and narrow pore distribution with a mean BJH pore diameter of 2.73 nm. Based on calculations and differential scanning calorimetry and thermogravimetric analyses, the action mechanism of the hydrothermal aging process has been proposed: the 100°C hydrothermal conditions and autogenous 2.3 atm pressure promote the condensation and dehydration of silanol groups, with the result that cross-linking degree, the flaws and moisture content in gels are reduced notably. Those processes guarantee the integrity of gels in the following drying process.     

Synthesis and X-ray diffraction studies of chiral nickel(II), zinc(II), manganese(II), and cobalt(II) complexes with C 2-symmetric 2,6-bis[4′-(R)-ethoxyoxazolin-2′-yl]pyridine

Chiral nickel(II), zinc(II), manganese(II), and cobalt(II) complexes with C ₂-symmetric 2,6-bis[4′-(R)-ethoxyoxazolin-2′-yl]pyridine were prepared, the single crystal of nickel(II) complex, [Ni((R,R)-Et-Py-box)(H₂O)₂Cl]Cl ((R,R)-Et-Pybox is 2,6-bis[4′-(R)-ethoxyoxazolin-2′-yl]pyridine), was obtained and indicated by X-ray diffraction analysis. The nickel(II) complex crystallizes in the orthorhombic system, space group P2₁2₁2₁ with a = 7.7346(4) Å, b = 19.7133(13) Å, c = 25.8014(14) Å, V = 3934.1(4) ų, Z = 8, and R = 0.0526 against 7010 reflections with I > 2σ (I). A feature of interest was noted in the unit cell of the compound, where two types of molecules exist, which similarly have a distorted octahedral geometry but only slightly differ in the orientation of the coordinated atoms to the central Ni atom. These two types of molecules interact with each other by O-H…Cl hydrogen bonds, giving rise to one dimensional ribbon structure.     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.     

Influence of demulsifiers of different structures on interfacial dilational properties of an oil-water interface containing surface-active fractions from crude oil

The influences of two commercial demulsifiers that have a straight chain and branch chain, respectively, on the dilational viscoelasticity of an oil-water interfacial film containing surface-active fractions from crude oil were investigated. The branch-chain demulsifier AE-121 could efficiently substitute surface-active fractions of different average molecular weights from the oil-water interface, while straight-chain SP-169 could only efficiently substitute those of large average molecular weight. It was apt to form a mix-adsorption layer with surface-active fractions of small average molecular weight. The results showed that the molecular size (or represented by average molecular weights) of the surface-active fractions was an important factor influencing the reciprocity of demulsifiers and surface-active fractions at the oil-water interface. This effect could be well explained by the difference between sizes of surface-active fraction molecules and vacancies between demulsifier molecules at the interface. The results of SDBS also proved this explanation.     

Transition metal complexes bearing 2,6-bis(imino)pyridyl: Synthesis,structure, ethylene polymerization/ oligomerization studies

A series of new complexes {2,6-bis[1-((2-methyl-4-methoxyphenyl)imino)ethyl]pyridine}Cl₂ [M=Fe(II) (2), Co(II) (3), Ni(II) (4), Cu(II) (5), Zn(II) (6)] have been synthesized. At 25°C, using 500 equiv of methylaluminoxane (MAO), the activities of Fe(II), Co(II) catalysts can reach 4.02 ×10⁶ g/mol-Fehatm for ethylene polymerization and 3.98×10⁵ g/mol-Cohatm for ethylene oligomerization. The effects of polymerization conditions such as reaction temperature, Al/M molar ratio and time on the activity of catalyst have been explored.     

Theoretical studies on vibrational spectra of some halides of Group IIB elements

The vibrational spectra of Group IIB elements halides MX2 and their dimers M2X4 (M=Zn(II), Cd(II) and Hg(II); X=F, Cl, Br and I) have been systematically investigated by ab initio RHF and B3LYP methods with LanL2MB, LanL2DZ and SDD basis sets. The optimized geometries, calculated vibrational frequencies are evaluated via comparison with the experimental data. The vibrational frequencies, calculated by these methods with different basis sets, are compared to each other too. The best results can be obtained by RHF/SDD method, with this method, the deviations for MX2 and Hg2X4 are <7%. Some vibrational frequencies of M2X4 that have not been experimentally reported are also predicted.     

On the complexity of following the central path of linear programs by linear extrapolation II

A class of algorithms is proposed for solving linear programming problems (withm inequality constraints) by following the central path using linear extrapolation with a special adaptive choice of steplengths. The latter is based on explicit results concerning the convergence behaviour of Newton's method to compute points on the central pathx(r), r>0, and this allows to estimate the complexity, i.e. the total numberN = N(R, ) of steps needed to go from an initial pointx(R) to a final pointx(), R>>0, by an integral of the local weighted curvature of the (primal—dual) path. Here, the central curve is parametrized with the logarithmic penalty parameterr0. It is shown that for large classes of problems the complexity integral, i.e. the number of stepsN, is not greater than constm log(R/), where < 1/2 e.g. = 1/4 or = 3/8 (note that = 1/2 gives the complexity of zero order methods). We also provide a lower bound for the complexity showing that for some problems the above estimation can hold only for 1/3.As a byproduct, many analytical and structural properties of the primal—dual central path are obtained: there are, for instance, close relations between the weighted curvature and the logarithmic derivatives of the slack variables; the dependence of these quantities on the parameterr is described. Also, related results hold for a family of weighted trajectories, into which the central path can be embedded.On leave from the Institute of Mathematics, Eötvös University Budapest, H-1080 Budapest, Hungary.