Simultaneous removal of uranium and humic acid by cyclodextrin modified graphene oxide nanosheets

Cyclodextrin-modified graphene oxide nanosheets (denoted as CD/GO) were synthesized by an in-situ polymerization method and characterized by as well as Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and potentiometric acid-base titration. The characterization results indicated that CD was successfully grafted onto GO surfaces by forming a chemical bond. Mutual effects on the simultaneous removal of hexavalent uranium and humic acid by CD/GO from aqueous solution were investigated. The results indicated that U(VI) and humic acid (HA) sorption on CD/GO were greatly affected by pH and ionic strength. The presence of HA enhanced U(VI) sorption at low pH and reduced U(VI) sorption at high pH, whereas the presence of U(VI) enhanced HA sorption. The surface adsorbed HA acted as a “bridge” between U(VI) and CD/GO, and formed strong inner-sphere surface complexes with U(VI). Sorption isotherms of U(VI) or HA on CD/GO could be well fitted by the Langmuir model. This work highlights that CD/GO can be used as a promising material in the enrichment of U(VI) and HA from wastewater in U(VI) and humic substances obtained by environmental pollution cleanup.     

Cu3Mo2O9 nanosheet incorporated with hemoglobin on carbon ionic liquid electrode for the direct electrochemistry and electrocatalysis

In this paper Cu₃Mo₂O₉ nanosheet was prepared by a hydrothermal method and further used to investigate the direct electrochemistry of hemoglobin (Hb) with a carbon ionic liquid electrode (CILE) as the substrate electrode. Hb was mixed with Cu₃Mo₂O₉ nanosheet and cast on the CILE surface with chitosan (CTS) as the film-forming material. UV-vis and FT-IR spectroscopic results showed that Hb remained in its native structure in the composite film. Direct electron transfer of Hb on the modified electrode was realized with a pair of well-defined quasi-reversible redox waves that appeared on cyclic voltammograms. The redox peak potential appeared at ?0.252 V (E _pc) and ?0.141 V (E _pa), respectively, with the formal peak potential calculated as ?0.196 V, which was the characteristic of electroactive center of Hb heme Fe(III)/Fe(II). The result could be attributed to the presence of Cu₃Mo₂O₉ nanosheet on the electrode surface that was of benefit for the protein orientation and promoted direct electron transfer between the redox active center of Hb and the substrate electrode. The CTS/Cu₃Mo₂O₉–Hb/CILE showed good electrocatalytic ability in reducing different substrates such as trichloroacetic acid, H₂O₂ and O₂, with wider linear range and lower detection limit, thus exhibiting the potential application of the Cu₃Mo₂O₉ nanosheet in third-generation electrochemical biosensors.     

Structures of Chlorinated Fullerenes,IPR C96Cl20 and Non‐classical C94Cl28 and C92Cl32: Evidence of the Existence of Three New Isomers of C96

Chlorination of various HPLC fractions of C₉₆ with a mixture of VCl₄ and SbCl₅ at 340–360 °C and single‐crystal X‐ray diffraction study of the products led to the identification of three new IPR isomers of C₉₆. The C₉₆(175) isomer forms a stable chloride, C₉₆(175)Cl₂₀, while chlorides of two other new isomers, C₉₆(114) and C₉₆(80), undergo cage shrinkage yielding C₉₄(NC1)Cl₂₈ and C₉₆(NC2)Cl₃₂ with non‐classical (NC) cages. These two NC chlorides contain, respectively, one and two heptagons flanked by pairs of fused pentagons and are stabilized by chlorine attachment to the emerging pentagon–pentagon junctions. Thus, the number of the experimentally confirmed C₉₆ isomers has reached nine, which corroborates the empirical rule that the C_6n fullerenes exhibit particularly rich isomerism.     

New high-pressures vapor-liquid equilibrium data for the carbon dioxide + 2-methyl-2-propanol binary system

New vapor-liquid equilibria (VLE) data at 323.15, 333.15, 343.15, and 353.15 K and pressures up to 112.9 bar are reported for the carbon dioxide + 2-methyl-2-propanol system. The experimental method used in this work was a static analytical method with liquid and vapor phases sampling using a rapid online sampler injector (ROLSI?) coupled to a gas chromatograph (GC) for analysis. Measured VLE data and literature data for carbon dioxide + 2-methyl-2-propanol system were modeled with the Soave-Redlich-Kwong (SRK) cubic equation of state with classical van der Waals (two-parameter conventional mixing rule, 2PCMR) mixing rules. A single set of interaction parameters that lead to a correct phase behavior was used in this work to model the new VLE data and critical points of the mixtures in a wide range of temperature and pressure. The SRK prediction results were compared to the new data measured in this study and to available literature data.

Open image in new window

     

Spatially‐resolved and polarized Raman scattering from a single Si nanowire

We report spatially‐resolved and polarized Raman scattering results from a single Si nanowire (NW). Transmission electron microscope images show that the surface morphology of the Si NW varies from smooth to rough along the long axis. As the NW grows, the smooth surface becomes rough because of Au diffusion to the surface, resulting in the formation of facets and stacking faults. Spatially‐resolved Raman spectra along the NW long axis reveal variations in tensile strain related to the morphological changes in NW surface. The tensile strain in the top segment of the NW with a smooth surface is greater than that in the bottom segment with a rough surface. Despite the formation of facets and stacking faults, polarized Raman scattering results both from the top and bottom segments of the NW are consistent with the Raman polarization selection rules expected for a cubic crystal. Copyright © 2015 John Wiley & Sons, Ltd.     

A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.     

Synthesis and Chromatographic Evaluation of Perfluorooctyl Stationary Phase for Separation of Basic Compounds

Fluorinated stationary phases provide unique separation effect on basic compounds, due to the fluorine atoms, and pentafluorophenyl stationary phases (PFPs) are the most widely used. Considering that some fluoroalkyls have higher fluorine contents than PFPs do, it is speculated that fluoroalkyl stationary phases should have potential new applications. Herein, we synthesized a silica-based stationary phase bonding perfluoroctyl (FC8) proved by characterization through elemental analysis and solid-state ¹³C cross-polarization/magic-anglespinning nuclear magnetic resonance. The chromatographic behavior of the stationary phase was evaluated with test compounds. In addition, to further study the applicability of FC8 materials, Corydalis decumbens (Thunb.) Pers. fraction, considered as a challenging medicine on reversed-phase chromatography columns, was chosen as a test sample. Results demonstrated that the FC8 stationary phase had better and more satisfactory separation performance than the PFP stationary phase on basic compounds.

     

Continuous Porous Aromatic Framework Membranes with Modifiable Sites for Optimized Gas Separation

Continuous microporous membranes are widely studied for gas separation, due to their low energy premium and strong molecular specificity. Porous aromatic frameworks (PAFs) with their exceptional stability and structural flexibility are suited to a wide range of separations. Main-stream PAF-based membranes are usually prepared with polymeric matrices, but their discrete entities and boundary defects weaken their selectivity and permeability. The synthesis of continuous PAF membranes is still a major challenge because PAFs are insoluble. Herein, we successfully synthesized a continuous PAF membrane for gas separation. Both pore size and chemistry of the PAF membrane were modified by ion-exchange, resulting in good selectivity and permeance for the gas mixtures H₂/N₂ and CO₂/N₂. The membrane with Br^? as a counter ion in the framework exhibited a H₂/N₂ selectivity of 72.7 with a H₂ permeance of 51844 gas permeation units (GPU). When the counter ions were replaced by BF₄^?, the membrane showed a CO₂ permeance of 23058 GPU, and an optimized CO₂/N₂ selectivity of 60.0. Our results show that continuous PAF membranes with modifiable pores are promising for various gas separation situations.     

偶氮苯基两亲性聚合物的自组装行为研究进展

偶氮苯基两亲性聚合物结合了偶氮苯基团的光响应、酶响应、主客体识别特性和两亲性聚合物的自组装特性,能够在选择性溶剂中发生聚合物可控自组装行为,这使得其在药物控释、纳米技术和生物医学材料等领域受到了广泛的关注。本文从结构类型和合成方法出发,综述了新型偶氮苯基两亲性聚合物在溶液中的自组装研究进展,并对该领域的发展前景进行了展望。