生晒参、全须生晒参中19种有机氯残留农药的毛细管气相色谱测定

建立了生晒参、全须生晒参中19种有机氯农药残留的毛细管气相色谱分析方法。对样品中六六六的4种异构体、滴滴涕的5种异构体、四氯苯胺、六氯苯、五氯硝基苯、七氯、五氯苯胺、艾氏剂、百菌清、环氧七氯、狄氏剂及异狄氏剂共19种有机氯农药的残留量进行了测定。以石油醚-丙酮混合物作为提取剂,样品采用索氏提取,提取液用弗罗里硅土柱层析净化。采用OV-1701石英毛细管气相色谱柱分离样品,ECD检测器进行检测。在3个水平添加时的回收率(n=5)分别为75.7%~96.1%、78.8%~111.6%和81.7%~115·2%;相对标准偏差分别为2.4%~10.6%、2.1%~9.8%和1.4~10.0%。方法用于生晒参和全须生晒参样品中农药残留的测定,结果满意。     

环境光对谷氨酸钠溶液激光拉曼光谱的影响

探讨了环境光的存在,对谷氨酸钠溶液的激光拉曼光谱的影响。研究表明,不同的环境光,自然光和室内荧光灯光,会对拉曼光谱产生不同的干扰效应,存在着特征谱峰、负峰或尖锐正峰, 干扰的影响不能忽略。建议在进行溶液激光拉曼光谱检测时,需在暗室或暗罩中进行,以完全隔离环境光的影响。     

使用叠栅层析技术测量超音速风洞中的非对称复杂密度场

使用叠栅层析技术解决超音速风洞中复杂密度场的测量难题。应用高灵敏度叠栅偏折仪和间隔角度旋转模型的方法获取超音速风洞中流场的多方向叠栅条纹图。层析计算中使用一种新的偏折角修正迭代的叠栅层析算法,该方法可以实现对有限角采样和包含遮挡物的非完全数据重建,迭代过程中结合内边界平滑滤波提高重建精度。实验中获取了马赫数为2.52的超音速风洞中9幅不同采样角的条纹图,经过50次迭代计算后重建出膨胀波区非对称密度场的截面分布,并对测量结果和误差进行了分析和讨论。使用计算流体力学技术对该密度场进行建模和计算,验证了叠栅层析重建结果的正确性,证实了该技术在测量复杂流场领域的重要价值。     

How the Aggregates Determine Bound Rubber Models in Silicone Rubber? A Contrast Matching Neutron Scattering Study

The correlation between aggregates and bound rubber structures in silicone rubbers(S(phr)) with various silica fractions(ΦSi) has been investigated by contrast matching small-angle neutron scattering(SANS), swelling kinetics, and low-field nuclear magnetic resonance(NMR).Mixed solvents with deuterated cyclohexane fractions of 4.9% and 53.7% were chosen to match the scattering length densities of the matrix(SMP(phr)) and the filler(SMS(phr)), respectively. All the data consistently suggest that:(i) There is a critical threshold ΦSic between 10 and 30 phr;below ΦSic, the isolated aggregates are dominant, while beyond ΦSic, some rubber fraction is trapped among the agglomerate;(ii) ΦSiindependent thicknesses around 7.5 nm(NMR) and 8.6 nm(SANS) suggest that the bound rubber formation is determined by inherent properties of the components, and the power-law around 4.2 suggests an exponential changed gradient density of the bound rubber;(iii) SMS(80) presents a bicontinuous bound rubber with three characteristic lengths of 41, 100, and 234 nm. The expanded correlation length, a 20 nm smaller aggregate sizes suggest that such existent bicontinuous network in dry samples with less ΦSi is kind of impacted by swelling. With the obtained bound rubber models, the reinforcing mechanism of filled silicone rubber is elucidated.     

The Biological Fate of Pharmaceutical Excipient β-Cyclodextrin: Pharmacokinetics,Tissue Distribution,Excretion, and Metabolism of β-Cyclodextrin in Rats

β-cyclodextrin has a unique annular hollow ultrastructure that allows encapsulation of various poorly water-soluble drugs in the resulting cavity, thereby increasing drug stability. As a bioactive molecule, the metabolism of β-cyclodextrin is mainly completed by the flora in the colon, which can interact with API. In this study, understanding the in vivo fate of β-cyclodextrin, a LC-MS/MS method was developed to facilitate simultaneous quantitative analysis of pharmaceutical excipient β-cyclodextrin and API dextromethorphan hydrobromide. The established method had been effectively used to study the pharmacokinetics, tissue distribution, excretion, and metabolism of β-cyclodextrin after oral administration in rats. Results showed that β-cyclodextrin was almost wholly removed from rat plasma within 36 h, and high concentrations of β-cyclodextrin distributed hastily to organs with increased blood flow velocities such as the spleen, liver, and kidney after administration. The excretion of intact β-cyclodextrin to urine and feces was lower than the administration dose. It can be speculated that β-cyclodextrin metabolized to maltodextrin, which was further metabolized, absorbed, and eventually discharged in the form of CO₂ and H₂O. Results proved that β-cyclodextrin, with relative low accumulation in the body, had good safety. The results will assist further study of the design and safety evaluation of adjuvant β-cyclodextrin and promote its clinical development.     

水性颜料体系无树脂色浆的制备与应用

中性墨水属于热力学上不稳定的颜料悬浮体系,选择低黏度、高稳定性的色浆是保证墨水体系分散稳定性的重要手段之一.基于此,以颜料炭黑和酞菁蓝为着色剂,配合超分散剂(EK43)与协同增效剂(BM10),制备了两款适用于中性墨水体系的无树脂色浆.首次从色浆粒径与体系分散稳定性角度出发,确定了EK43、BM10用量以及最佳研磨时间...     

Peridynamic modeling and simulation of coupled thermomechanical removal of ice from frozen structures

Meccanica - In this work, a bond-based peridynamic de-icing model has been developed to simulate the thermo-mechanical ice removal process of frozen structures. In the proposed numerical method,...     

Spectroscopic and quantum-chemical study of molecular interactions of iso-quinolinium ylids in polar solutions

Abstract

Three iso-quinolinium ylids are studied by visible electron absorption spectroscopy from the point of view of their interactions with solvent molecules. The quantum mechanical calculations with Spartan 14 Program and solvatochromism of the intramolecular charge transfer visible absorption band of the studied molecules emphasized the prevalence of universal orientation-induction interactions in aprotic solvents and additionally the presence of hydrogen bond between the ylid molecules and the hydroxyl groups of the solvent molecules. The contribution of each type of interactions in the studied solutions is finally established by a multilinear regression applied to solvatochromic data.     

高压烧结制备Tb掺杂n型(Bi1–xTbx)2(Te0.9Se0.1)3合金及其微结构和热电性能

采用高压烧结技术制备了稀土元素Tb掺杂的n型Bi2Te2.7Se0.3基纳米晶块体热电材料.将高压烧结成型的样品于633 K真空退火36 h.研究了Tb掺杂量对样品的晶体结构和热电性能的影响.结果表明,高压烧结制备的样品为纳米结构, Tb掺杂使样品的晶胞体积变大,功率因子增大,热导率降低,从而使ZT值提高.Tb掺杂量为x=0.004是最优的掺杂量,该掺杂量的高压烧结样品经退火处理后,于373 K时ZT值达到最大为0.99,并且在323-473 K范围内, ZT值均大于0.8,这对用于温差发电领域具有重要意义.     

有耗介质层上多导体传输线的电磁耦合时域分析方法

目前,针对空间电磁场作用有耗介质层上传输线的电磁耦合,仍缺乏有效的数值分析方法.因此,本文提出一种高效的时域混合算法,很好地解决了有耗介质层上传输线电磁耦合建模难的问题.首先,对经典传输线方程进行改进,推导了适用于有耗介质层上多导体传输线电磁耦合分析的修正传输线方程.然后,结合时域有限差分方法和相应插值技术,求解修正传输线方程,获得多导线及其端接负载上的电压和电流响应,并实现空间电磁场辐射与多导线瞬态响应的同步计算.最后,通过相应计算实例的数值模拟,与CST软件的仿真结果进行对比,验证了时域混合算法的正确性和高效性.