Interior point cutting plane method for optimal power flow

In this paper, an interior point cutting plane method (IPCPM)is applied to solve optimal power flow (OPF) problems. Comparedwith the simplex cutting plane method (SCPM), the IPCPM is simpler,and efficient because of its polynomial-time characteristic.Issues in implementing IPCPM for OPF problems are addressed,including (1) how to generate cutting planes without using thesimplex tableau, (2) how to identify the basis variables inIPCPM, and (3) how to generate mixed integer cutting planes.The calculation speed of the proposed algorithm is further enhancedby utilizing the sparsity features of the OPF formulation. Numericalsimulations on IEEE 14-300-bus test systems have shown thatthe proposed method is effective.     

Estimation effective de la perte de positivité dans la régularisation des courants

Let (X,ω) be a compact complex Hermitian manifold, and let T?γ be a d-closed (1,1) almost positive current on X. A variant of Demailly's regularization-of-currents theorem states that T is the weak limit of a sequence of (1,1)-currents T_m with analytic singularities of coefficient 1/m, lying in the same cohomology class as T, whose Lelong numbers converge to those of T, and with a loss of positivity decaying to zero. We prove that if the (1,1)-form γ is assumed to be closed and C^∞, the regularizing currents T_m can be chosen such that $\text{T}{}_{\mathrm{m}}\text{?γ?}\text{C}\text{m}$ for a constant C>0 independent of m. To cite this article: D. Popovici, C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

Mathematical modeling of two-photon thermal fields in laser–solid interaction

In this paper, we have developed an analytical model to study the temperature distributions in IR optical materials heated by laser pulses. Our model takes into account the two-photon absorption (TPA). The calculations are based on a three-dimensional model of heat diffusion in solids using the integral transform method. We find out the rigorous analytical expression of the thermal field when one considers both one- and two-photon absorption. The model is valid for any laser–solid system whose interaction can be described by the generalized Beer–Lambert law. Specific results are presented for an application of the model to ZnSe sample. We find out that TPA can produce detectable temperature variation.     

p型导电掺In的SnO_2薄膜的制备及表征

采用溶胶 凝胶提拉法成功地制备了p型导电掺In的SnO2 薄膜 .x射线衍射测试结果表明 ,掺In的SnO2 薄膜保持SnO2 的金红石结构 .吸收谱测试结果表明 ,掺In的SnO2 禁带宽度为 3 8eV .霍尔测量结果表明 ,空穴浓度与热处理温度有很大的关系 ,5 2 5℃为最佳热处理的温度 .铟锡原子比在 0 0 5— 0 2 0范围内 ,空穴的浓度与In的含量有直接的关系 ,并随In含量的增加而增加     

Rugged distal tips for CO2 laser medicine

Low-loss and rugged distal tips for CO₂ laser have been proposed and fabricated based on a commercially available stainless steel (St) pipe. A method of smoothening the inner surface of the St pipe with a rough inner surface is put forward. Fabrication parameters, transmission properties, and mechanical strength of the cyclic olefin polymer-coated silver hollow St distal tip are experimentally discussed.     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

Phase formation and control of morphology in sputtered Cu-In alloy layers

The dependence of structural properties and surface morphology of Cu-In alloy layers on the composition and sputtering deposition sequence were investigated by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The properties of the co-sputtered alloy layers changed abruptly around the composition boundary when the Cu/In ratio reached 1/2. This can be explained by the effective heat of formation (EHF) model, which has been used to predict the sequence of phase formation for metal diffusion couples. The use of a co-sputtered alloy layer with a high In concentration was not suitable for fabricating solar cells, because the film had a very rough morphology due to large In islands formed on the CuIn₂ phase. However, it was possible to minimize this phase by In sputtering followed by co-sputtering with a Cu/In ratio of 1 (Cu-In/In/Glass). This permitted the fabrication of a homogeneous Cu-In alloy layer, which was not possible through the simple co-sputtering.     

Simple Entanglement Measure for Multipartite Pure States

A simple entanglement measure for multipartite pure states is formulated based on the partial entropy of a series of reduced density matrices. Use of the proposed new measure to distinguish disentangled, partially entangled, and maximally entangled multipartite pure states is illustrated.     

Bi12TiO20纳米粉体的制备及其光吸收特性研究

以钛酸四丁酯和硝酸铋为原料 ,利用化学溶液分解法制备了Bi12 TiO2 0 纳米多晶粉体 .采用XRD和TEM对其结构和形貌进行了表征 .结合热重 差热 (TG DTA)分析 ,探讨了Bi12 TiO2 0 晶相的形成机理 .通过UV Vis漫反射谱的测定 ,研究了Bi12 TiO2 0 纳米晶粉体的光吸收特性 .结果显示 ,从组成为化学计量比的前驱液中可以很容易制得纯Bi12 TiO2 0 纳米晶粉体 ,该Bi12 TiO2 0 纳米晶粉体呈现了在很宽的波长范围内 (5 6 0～ 385nm )对光的吸收的特性 .     

改革物理实验课教学,提高实验课的教学质量

根据多年的物理实验教学经验，阐明了物理实验教学改革应重视的问题，并提出了几点改进措施。