Assessment of sandwich models for the prediction of sound transmission loss in unidirectional sandwich panels

The consistent higher-order approach and the two-parameter foundation formulation are used for the derivation of sound transmission loss in symmetric unidirectional (infinitely wide) sandwich panels with isotropic face sheets. In both models, transmission loss is calculated using decoupled equations representing symmetric and anti-symmetric motions of a sandwich panel. The closed-form expressions for impedances and transmission coefficient of a symmetric sandwich panel with an isotropic core are derived for the two-parameter foundation model. A comparison between the numerical predictions based on the two sandwich models and available experimental data shows that the consistent higher-order formulation can be used to predict the transmission loss in symmetric sandwich panels with both honeycomb and isotropic cores. For prediction of transmission loss of symmetric sandwich panels with an isotropic core, the two-parameter foundation model is more convenient, while the consistent higher-order approach is more accurate.     

多层膜劳厄透镜对8keV X射线的聚焦性能模拟研究

基于多层膜技术的劳厄(Laue)透镜能实现硬X射线纳米级聚焦,在X射线微纳分析领域具有重要的应用前景.基于衍射动力学理论,分析了X射线在多层膜劳厄透镜中的传播,计算了不同结构的多层膜劳厄透镜对8 keVX射线的聚焦性能.结果表明,最外层厚度为5 nm的倾斜多层膜劳厄透镜可获得5.7 nm的聚焦光斑和26%的平均衍射效率...     

Dual-wavelength distributed Bragg reflector semiconductor laser based on a composite resonant cavity

We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector (DBR) composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing (QWI) technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.     

甲苯胺蓝共振光散射法测定纳克级脱氧核糖核酸

研究了吩噻嗪类染料甲苯胺蓝 (TB)与DNA作用的共振光散射光谱 ,在pH 1 0～ 1 1的范围内 ,加入DNA导致甲苯胺蓝共振光散射增强 ,在 35 0nm处 ,存在一共振光散射增强峰 ,其强度与DNA浓度呈线性关系 ,据此建立了一种测定DNA的共振光散射法。对于ctDNA ,方法的线性范围为 0～ 90 0ng·mL-1 ,检出限为6 75ng·mL-1 ,RSD为 3 7% ;对于fsDNA ,方法的线性范围为 0～ 90 0ng·mL-1 ,检出限为 2 99ng·mL-1 ,RSD为 5 6 % .已用于合成样品中DNA的测定     

大模场面积光子晶体光纤激光器展宽脉冲锁模域的束缚态运转

实验研究了大模面积光子晶体光纤飞秒激光器在近零色散点展宽脉冲锁模的束缚态运转.获得了双脉冲束缚态锁模,以及脉冲间隔不相等的多脉冲束缚态锁模,实验发现束缚态的子脉冲间距具有随机性.通过建立光纤锁模激光器的数值模型,分析了激光器束缚态锁模建立的动力学过程,在一定抽运强度下,激光器存在多个稳态,或者单脉冲运转,或者子脉冲间隔不相等的束缚态运转,这取决于锁模建立阶段半导体可饱和吸收镜(SESAM)对噪声信号的随机提取.并提出了抑制束缚态的方法,模拟得出此项技术可直接获得的最大单脉冲能量为19.6 nJ,考虑到40%左右的压缩损耗,可得到压缩至76 fs的最短脉冲,单脉冲能量为11.8 nJ.数值模拟结果能很好的与实验相符合.     

Improved space time prewhitener for linear frequency modulation reverberation using fractional Fourier transform

This letter presents an improved space time prewhitening method for linear frequency modulation (LFM) reverberation. The proposed method transforms the reverberation to fractional Fourier domain to whiten using fractional Fourier transform. The linear varying frequency in LFM reverberation is focused on a stationary frequency, and the adjacent block signal is used as the reference signal of prewhitening. Finally, experiment results with real reverberation data verify that the proposed method improves the detection performance of active sonar in shallow sea significantly.     

高斯光束非线性“热像”效应研究

高功率激光系统中非线性“热像”强度可能达到光学元件损伤阀值，从而对系统的安全运行造成威胁.以往的非线性“热像”现象研究都是基于无限大平面光波背景，但实际系统中传输的是有限束宽光束.本文以高斯光束为例，基于无像差自聚焦理论分析了有限束宽光束的“热像”形成规律.结果表明，高斯光束“热像”的强度与位置在光束腰斑较小时与平面光波情况有明显不同，但光束腰斑较衍射物大得多时，高斯光束可以近似当作平面光波处理.     

Novel delay-distribution-dependent stability analysis for continuous-time recurrent neural networks with stochastic delay

<正>In this paper,the problem of delay-distribution-dependent stability is investigated for continuous-time recurrent neural networks(CRNNs) with stochastic delay.Different from the common assumptions on time delays,it is assumed that the probability distribution of the delay taking values in some intervals is known a priori.By making full use of the information concerning the probability distribution of the delay and by using a tighter bounding technique(the reciprocally convex combination method),less conservative asymptotic mean-square stable sufficient conditions are derived in terms of linear matrix inequalities(LMIs).Two numerical examples show that our results are better than the existing ones.     

Design of interdigital transducers for crack detection in plates

Interdigital transducers (IDT) for non-destructive evaluation (NDE) of cracks in plates are designed based on an analytical model established previously. Key considerations include mode selectivity, excitation strength, collimation of wave and cost. The advantage of mode selectivity of IDT over PZT patch is presented both analytically and experimentally. Effects of parameters, namely finger spacing, width, length, number of fingers, and the size of IDT, on the excitation strength and mode selectivity are considered. This led to the design of a mobile double-sided IDT as an efficient device where excitation strength is strong and focused. The device was fabricated in-house using commercially available piezoelectric ceramics and used to develop a procedure for accurate identification of the direction and extent of cracks in plates. Three aluminum plates, one with a linear deep crack, another with a piecewise linear shallower crack and the third with a curved crack, were used to illustrate the accuracy and efficiency of both the proposed device and procedure for effective NDE.     

“天光”一号MOPA系统光学元件加工与镀膜的进展

本文阐述了在中国原子能科学研究院“天光一号”ＫｒＦ激光核聚变实验装置上，ＭＯＰＡ系统光学元件加工与镀膜研究工作的进展。实验测量结果表明，加工后的基片表面均方根粗糙度对于Ｋ９光学玻璃与熔融石英玻璃来说分别为σｒｍｓ＝１．８±０．５ｎｍ，σｒｍｓ＝２．０±０．４ｎｍ。镀ＨｆＯ２／ＳｉＯ２高反射膜的光学元件的反射率与破坏阈值分别为Ｒ＞９９．５％，Ｅｔｈ＝１．３０～１．３３Ｊ／ｃｍ２。镀Ａｌ２Ｏ３／ＭｇＦ２增透膜的光学元件的透射率与破坏阈值分别为Ｔ＞９９．５％，Ｅｔｈ＝１．３～１．９７Ｊ／ｃｍ２。