Aromatic Higher Alcohols in Wine: Implication on Aroma and Palate Attributes during Chardonnay Aging

The higher alcohols 2-phenylethanol, tryptophol, and tyrosol are a group of yeast-derived compounds that have been shown to affect the aroma and flavour of fermented beverages. Five variants of the industrial wine strain AWRI796, previously isolated due to their elevated production of the ‘rose-like aroma’ compound 2-phenylethanol, were characterised during pilot-scale fermentation of a Chardonnay juice. We show that these variants not only increase the concentration of 2-phenylethanol but also modulate the formation of the higher alcohols tryptophol, tyrosol, and methionol, as well as other volatile sulfur compounds derived from methionine, highlighting the connections between yeast nitrogen and sulfur metabolism during fermentation. We also investigate the development of these compounds during wine storage, focusing on the sulfonation of tryptophol. Finally, the sensory properties of wines produced using these strains were quantified at two time points, unravelling differences produced by biologically modulating higher alcohols and the dynamic changes in wine flavour over aging.     

How simple can a thermotropic mesogenic molecule be? Supramolecular layers through a network of hydrogen bonds

The supramolecular approach was applied to obtain a thermotropic liquid crystalline phase from the smallest possible molecules. Diaminobenzene derivatives are able to form smectic layers through a network of interconnected hydrogen bonded rings. The observed smectic A phase exhibits unusually small optical birefringence, comparable with that of lyotropic lamellar phases.     

Approximating Time to Extinction for Endemic Infection Models

Approximating the time to extinction of infection is an important problem in infection modelling. A variety of different approaches have been proposed in the literature. We study the performance of a number of such methods, and characterise their performance in terms of simplicity, accuracy, and generality. To this end, we consider first the classic stochastic susceptible-infected-susceptible (SIS) model, and then a multi-dimensional generalisation of this which allows for Erlang distributed infectious periods. We find that (i) for a below-threshold infection initiated by a small number of infected individuals, approximation via a linear branching process works well; (ii) for an above-threshold infection initiated at endemic equilibrium, methods from Hamiltonian statistical mechanics yield correct asymptotic behaviour as population size becomes large; (iii) the widely-used Ornstein-Uhlenbeck diffusion approximation gives a very poor approximation, but may retain some value for qualitative comparisons in certain cases; (iv) a more detailed diffusion approximation can give good numerical approximation in certain circumstances, but does not provide correct large population asymptotic behaviour, and cannot be relied upon without some form of external validation (eg simulation studies).     

Influence of terbium on structure and luminescence of nanocrystalline TiO2 thin films

In this work analysis of the structural and optical properties of TiO₂ thin films doped with terbium has been described. Samples were prepared by a high energy reactive magnetron sputtering process under low pressure of oxygen plasma. X-ray diffraction results have shown that different TiO₂ crystal forms have been produced, depending on the amount of Tb dopant. The undoped matrix had rutile structure with crystallites with a size of 8.7 nm, while incorporation of 0.4 at. % of Tb into the film during the sputtering process resulted in anatase structure with bigger crystallites (11.7 nm). Increasing the amount of terbium up to 2 at. % and 2.6 at. % gave rutile structure with crystallites with a size of 6.6 nm for both films. However, Raman spectroscopy has revealed that in the case of TiO₂:(2 at. % Tb), except for the rutile form, the presence of fine-crystalline anatase was observed. Moreover, the lack of Raman peaks shift attests to the lack of stress in the titania lattice of all of the TiO₂:Tb films. This fact indicates localization of Tb3+ ions on the surface of TiO₂ nanocrystals. In the case of optical investigation, results have shown that doping with terbium has a significant influence on the properties of TiO₂, but it does not decrease the high transparency of the matrix. The observed changes of the transmission characteristics were produced only due to modification of the TiO₂:Tb structure. Photoluminescence measurements have shown that emission of light from TiO₂:Tb films occurs when the amount of terbium is 2.6 at. %. Based on the obtained results a scheme of direct energy transfer from titanium dioxide matrix (with rutile structure) to Tb³⁺ ions has been proposed.     

Smectic behaviour of methyl 4-alkoxybenzoates with a partially fluorinated alkyl chain

A series of 4-alkoxybenzoic acids 1[m,n] and their methyl esters 2[m,n] containing a partially fluorinated alkyl chain was prepared and their physical properties were investigated by optical, thermal and powder X-ray diffraction (XRD) methods. The former exhibits an SmC phase, while the latter form an SmA phase. XRD analysis indicated liquid-like character of the linking alkyl chains, and showed a decreasing layer thermal expansion coefficient from positive to negative upon increasing the degree of fluorination. The new esters 2[m,n] expanded the series and permitted analysis of trends in thermal stability of the SmA phase. The results demonstrate that the SmA–I transition temperature increases by about +20 K per CF₂CF₂ unit, and is destabilised by –5.6 K upon extending the hydrocarbon part by each CH₂CH₂ group. Data for the expanded series 2[m,n] were used for comparative analysis of mesogenic behaviour in two other series of derivatives of 1[m,n]. Synthetic methods for 1[m,n] and 2[m,n] are reviewed.     

Thermal parameters determination of Co–Al–W as-cast alloy homogenization by DTA analysis

The γ–γ′ Co-based superalloys are newly developed class of refractory alloys which may replace commercial Ni-based superalloys owing to their favorable properties at high temperature. In case of new Co-based superalloys, the heat treatment aims to obtain microstructure composed of appropriate volume fraction of small cuboidal γ′-Co₃(Al,W) precipitates within the γ-Co matrix. However, due to a high tendency to interdendritic segregations of alloying elements, the alloys based on Co–Al–W system should be normally homogenized before further steps of heat treatment (solutionizing and aging). In this study, thermal analysis was applied for determination of temperature range for primary heat treatment of the Co–9Al–9W (at.%). The differential thermal analysis (DTA) measurements were carried out on the thermal analyzer NETZSCH STA 449 F3 Jupiter. On the base of obtained results, respectively, solvus of γ′ phase and solidus temperatures were determined, as well as the thermal range of Co₃W (DO₁₉) phase precipitation. As a consequence, the heat treatment without homogenizing (only solution and aging) was proposed as a most suitable way to obtain beneficial microstructure.     

Facile synthesis of cis-2-Alkyl-3-trialkylsilyloxycycloalkanones via the non-aldol aldol rearrangement of 2,3-epoxycycloalkanols

Silyl triflate-promoted rearrangement of cis-2,3-epoxycycloalkanols A, prepared by epoxidation of the cyclic allylic alcohol and then silylation, afforded good yields ( approximately 70-75%) of the cis-2-alkyl-3-silyloxycycloalkanones B, presumably via the intermediates C and D, even with quite large alpha-substituents, e.g., tert-butyl. Finally, it has been shown that the stereochemistry of the epoxy alcohol is crucial as one would expect from the mechanism.     

Vicinal deuterium perturbations on hydrogen NMR chemical shifts in cyclohexanes

The substitution of a deuterium for a hydrogen is known to perturb the NMR chemical shift of a neighboring hydrogen atom. The magnitude of such a perturbation may depend on the specifics of bonding and stereochemical relationships within a molecule. For deuterium-labeled cyclohexanes held in a chair conformation at -80 degrees C or lower, all four possible perturbations of H by D as H-C-C-H is changed to D-C-C-H have been determined experimentally, and the variations seen, ranging from 6.9 to 10.4 ppb, have been calculated from theory and computational methods. The predominant physical origins of the NMR chemical shift perturbations in deuterium-labeled cyclohexanes have been identified and quantified. The trends defined by the Delta delta perturbation values obtained through spectroscopic experiments and by theory agree satisfactorily. They do not match the variations typically observed in vicinal J(H-H) coupling constants as a function of dihedral angles.