Effects of ZnS:Mn/AlN multilayer structure on luminescent properties of nanostructured thin-film EL device

Effects of ZnS:Mn/AlN multilayer structure on luminescent properties of nanostructured (NS) thin-film electroluminescent (TFEL) device of which emission layer is a multilayer composed with ZnS:Mn layers and 0.7-nm-thick AlN interlayers were studied. The bandgap widening and the increased PL efficiency of Mn²⁺ 3d-3d transitions with a decrease in the ZnS:Mn single-layer thickness down to 5 nm were observed, which is ascribed to quantum confinement effects. Meanwhile, the multilayer with 2-nm-thick ZnS:Mn single-layers shows a drop of PL efficiency, indicating the presence of defective region just on AlN. The tendency of the luminous efficiency of the NS-TFEL device against the ZnS:Mn single-layer thickness is similar to the tendency found in the PL efficiency, indicating the importance of the ZnS:Mn/AlN interface for the device performance.     

Development of ion transportation, extraction and neutralization systems for atomic beam resonance method

A device that produces a low-energy and largely spin polarized RI beam based on the atomic beam resonance method (RIABR) has been developed. We have performed measurements of stopping and drifting an incoming RI ion beam in a gas chamber, extraction of the ions into a vacuum region, and neutralization of the extracted low-energy ion beam. The drift efficiency of RI ions in a gas and the extraction efficiency at a Laval-type glass nozzle were found to be 0.72±0.04 and 0.033, respectively. The result of the experiment for the neutralization is also discussed.     

Top-gathering pillar array of hybrid organic–inorganic material by means of self-organization

Two-dimensional (2D) pillar arrays with submicrometer to micrometer repetitions have been fabricated from hybrid organic–inorganic material by mask lithography or multi-beam interference lithography. The type of array structure depends on structural parameters such as the pillar height, diameter and distance between neighboring pillars. Two kinds of periodic arrays, 2D arrays and ‘top-gathering’ arrays, can be obtained by controlling the structural parameters. In the top-gathering arrays, the pillars are gathered at the top by means of self-organization, and ‘top-gathering’ units composed of four pillars can be formed. PACS 68.35.Gy; 81.20.Fw; 82.50.-m     

A Triphenylamine with Two Phenoxy Radicals Having Unusual Bonding Patterns and a Closed‐Shell Electronic State

Reported herein is the structure and the electronic properties of a novel triphenylamine derivative having two phenoxy radicals appended to the amino nitrogen atom. X‐ray single crystal analysis and the magnetic resonance measurements demonstrates the unexpected closed‐shell electronic structure, even at room temperature, of the molecule and two unusual C? N bonds with multiple‐bond character. The theoretical calculations support the experimentally determined molecular geometry with the closed‐shell electronic structure, and predicted a small HOMO–LUMO gap originating from the nonbonding character of the HOMO. The optical and electrochemical measurements show that the molecule has a remarkably small HOMO–LUMO gap compared with its triphenylamine precursor.     

Synthesis of Extended π‐Systems through C–H Activation

Activation of aromatic C? H bonds by a transition metal catalyst has received significant attention in the synthetic chemistry community. In recent years, rapid and site‐selective extension of π‐electron systems by C–H activation has emerged as an ideal methodology for preparing organic materials with extended π‐systems. This Review focuses on recently reported π‐extending C–H activation reactions directed toward new optoelectronic conjugated materials.     

Chiral Ammonium Betaine‐Catalyzed Highly Stereoselective Aza‐Henry Reaction of α‐Aryl Nitromethanes with Aromatic N‐Boc Imines

A highly stereoselective aza‐Henry reaction of α‐aryl nitromethanes with aromatic N‐Boc imines was established by using C₁‐symmetric chiral ammonium betaine as a bifunctional organic base catalyst. Various substituted aryl groups for both imines and nitromethanes were tolerated in the reaction, and a series of precursors for the synthesis of unsymmetrical anti‐1,2‐diaryl ethylenediamines was provided.     

Highly bent crystals formed by restrained π-stacked columns connected via alkylene linkers with variable conformations

A reproducible formation of strongly bent crystals was accomplished by structurally restraining macrocyclic π-conjugated molecules. The model π-units consist of two 9,10-bis(2-thienylethynyl)anthracenes with a strong propensity for stacking, which are connected in a macrocyclic fashion via two alkylene linkers. The correlation between the crystalline morphology and the macrocyclic structures restrained by a variety of flexible alkylene linker combinations was systematically studied. Bent crystals were obtained only with specific alkylene linkers of appropriate chain length. The alkylene linkers can adopt different conformations in the crystal packing, so as to fill voids within the macrocycle. The ability to form several similar molecular structures with different alkylene conformations gives rise to contaminations of different crystalline phases within a single crystal, and it is these phase contaminations which are responsible for the bending of the crystals.     

Olefin Polymerization Catalyzed by Double‐Decker Dipalladium Complexes: Low Branched Poly(α‐Olefin)s by Selective Insertion of the Monomer Molecule

Dipalladium complexes of a cyclic bis(diimine) ligand with a double‐decker structure catalyze polymerization of ethylene and α‐olefins and copolymerization of ethylene with 1‐hexene. The polymerization of 1‐hexene yields a polymer that is mainly composed of the hexamethylene unit formed by 2,1‐insertion of the monomer into the palladium–carbon bond, followed by chain‐walking (6,1‐insertion). The polymerization of 4‐methyl‐1‐pentene proceeds by 2,1‐insertion with a selectivity of 92–97 %, and affords the polymer with methyl and 2‐methylhexyl branches. 2,1‐Insertion occurs selectively in all of the polymerization reactions of α‐olefins catalyzed by the dipalladium complexes. Ethylene polymerization with the catalyst at 100 °C lasts over 24 h, whereas the monopalladium–diimine catalyst loses its activity within 8 h at 60 °C. Polyethylene obtained by the dipalladium catalyst is less‐branched and has a higher molecular weight compared to that of the monopalladium catalyst under the same conditions. Copolymerization of ethylene with 1‐hexene affords solid products with melting points and molecular weights that vary depending on the polymerization time, suggesting formation of a block and/or gradient copolymer.     

Preparation of low-surface-energy poly[2-(perfluorooctyl)ethyl acrylate] microparticles and its application to liquid marble formation

We demonstrate the successful preparation of stable liquid marbles from various liquids. This is accomplished by using low-surface-energy poly[2-(perfluorooctyl)ethyl acrylate] (PFA-C(8)) as microparticles. The PFA-C(8) microparticles were prepared by the spontaneous self-organized microparticulation of PFA-C(8). The physical properties remained intact in the polymer morphology as confirmed by wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) measurements. The extremely low surface energy of PFA-C(8) provides a high solid-liquid spreading coefficient (S(S/L)) value for various combinations of liquids. As a result, liquid marbles were obtained from various liquids, unlike the case with other fluorine polymer particles such as poly(tetrafluoroethylene) (PTFE) and poly(vinilydene fluoride) (PVDF). These results suggest that the technique is widely applicable for preparing novel functional materials.