Scale-up of high shear granulation based on the internal stress measurement

Scale-up of wet granulation in a vertical high shear mixer was conducted. Pharmaceutical excipient powders composed of lactose, cornstarch and micro-crystallinecellulose, and hydroxypropylcellulose as a binder were mixed together and then granulated with purified water under various operating conditions and vessel scales. A novel internal stress measurement system was developed and stress of normal and tangential directions that granules received from the agitator blade during the granulation was continuously measured. The results indicated that granules received stress mainly from the tangential direction, which also showed the largest value near at the vessel wall. The effects of the agitator tip speed and the centrifugal acceleration on the measured stress was investigated. It was found that the tip speed of the agitator blade could be the main factor for the granule growth. The physical properties such as strength, size distribution and compressibility of granules prepared by changing the operating conditions and the vessel scales were evaluated and the scale-up characteristics of high shear granulation were investigated experimentally. The results showed that these physical properties had linear correlations with the tip speed. It was finally concluded that the scale-up of high shear granulation could be well conducted by means of the tip speed of the agitator blade.     

Kinetic and computational studies on aminolysis of bicyclic carbonates bearing alicyclic structure giving alicyclic hydroxyurethanes

Aminolysis of bicyclic carbonates, which consist of five-membered cyclic carbonate and five- or six-membered alicyclic groups, was examined. Kinetic studies revealed that the aminolysis of the bicyclic carbonate with cyclohexane ring proceeded more smoothly than that of the bicyclic carbonate with cyclopentane ring. Computational calculation suggested that the different reaction rates originate from the distinct ring-strain of the cyclic carbonate groups affected by the conformation of the alicyclic groups.     

Rate of spontaneous deactivation of styryl and α-methylstyryl carbanions

The deactivation of α-methylstyryl and styryl carbanions followed by spectral change and titration was studied kinetically. First-order rate constants were obtained for the deactivation of oligo-α-methylstyryl lithium, disodium, and dipotassium in tetrahydrofuran and of polystyryl potassium in varying degrees of polymerization in benzene that contained a small amount of tetrahydrofuran and n-hexane. It was observed that the addition of cryptate [222] exerts a significant effect on the system of oligo-α-methylstyryl disodium in tetrahydrofuran. The effect of dilution, degree of polymerization of the polymer, and counterions on the rate of deactivation of carbanions was discussed.     

A glucose electrode based on carbon paste chemically modified with a ferrocene-containing siloxane polymer and glucose oxidase,coated with a poly(ester-sulfonic acid) cation-exchanger

A carbon-paste chemically modified with glucose oxidase and a ferrocene-containing siloxane polymer was further modified by coating the electrode surface with a poly(ester-sulfonic acid) cation-exchanger, Eastman AQ-29D. The polymer is obtained as a homogeneous aqueous dispersion at pH 5–6; when dried, the polymer coating is not water-soluble. The coating was shown not to be detrimental to the enzyme activity but to prevent electrochemically active anionic interferents such as ascorbate and urate from reaching the electrode surface. The polymer coating also prevented glucose oxidase from leaking out of the carbon paste into the contacting solution and protected the electrode surface from fouling agents present in urine and bovine serum albumin. Uncoated electrodes lost some 10-2-15% of their original response to glucose after storage in buffer for three weeks whereas the response of the coated electrodes remained constant. Calibration curves for glucose were strictly linear up to about 5 mM for uncoated and up to 20 mM for coated electrodes. The response current to glucose was not decreased after coating.     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

A new method for the synthesis of novel 1,2,4-triazolo[3,4-f][1,2,4]triazines

Novel compounds 8-(quinoxalin-2-yl)-1,2,4-triazolo[3,4-f][1,2,4]triazines 3a,b were obtained by a new annulation method in the 1,2,4-triazine synthesis.     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

Rapid fermentation of beer using an immobilized yeast multistage bioreactor

The characteristics of yeast sulfite metabolism in a multistage bioreactor system for beer fermentation were investigated. No sulfite was produced in the continuous stirred-tank reactor (CSTR). However, large amounts were produced in the packed-bed reactor (PBR). Production of sulfite in the PBR seems to be inevitable when it is operated continuously. In order to control the sulfite level in the young beer, the yeast needs to be reactivated into the growth phase. One possible strategy to achieve this is to aerate and periodically remove yeast clogged in the reactor once every 6–7 months before the sulfite level exceeds a given concentration (e.g., 20 mg/L). It was confirmed that sulfite production is closely related to the growth condition of the yeast and is therefore important to consider in the control strategy for sulfite when using the immobilized yeast reactor for beer production.     

Molecular-shape recognition of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography

Summary The molecular-shape recognition of polycyclic aromatic hydrocarbons has been studied on various stationary phases in reversed-phase high-performance liquid chromatography. The examined stationary phases were phenyl-, diphenyl-, triphenyl- and benzyl-bonded silicas. The results of regression analysis inidcated that triphenylsilica is the best packing material to recognize the difference in the molecular-shape of structural isomers. This fact was confirmed by the separation of 4-ring isomers.     

Preparation and gas separation properties of zeolite T membrane

Zeolite T membranes were synthesized on tubular porous mullite tubes by hydrothermal synthesis. The membranes selectively permeated carbon dioxide from CO2/CH4 and CO2/N2 mixtures with high separation performances, which were due to combined effects of molecular sieving and competitive adsorption.