Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: fabrication and properties

The functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were obtained by Friedel–Crafts acylation, which introduced aromatic amine groups onto the sidewall. And the grafted yield was adjusted by controlling the concentration of the catalyst. The composite solutions containing f‐MWCNTs and polyacrylonitrile (PAN) were then prepared by in‐situ or ex‐situ solution polymerization. The resulting solutions were electrospun into composite nanofibers. In the in‐situ polymerization, morphological observation revealed that f‐MWCNTs was uniformly dispersed along the axes of the nanofibers and increased interfacial adhesion between f‐MWCNTs and PAN. Furthermore, two kinds of f‐MWCNTs/PAN composite nanofibers had a higher degree of crystallization and a larger crystal size than PAN nanofibers had, so the specific tensile strengths and modulus of the composite nanofibers were enhanced. And the thermal stability of f‐MWCNTs/PAN from in‐situ method was higher than that of ex‐situ system. When the f‐MWCNTs content was less than 1 wt%, the specific tensile strengths and modulus of nanofibers were enhanced with increase in the amounts of f‐MWCNTs, and f‐MWCNTs/PAN of in‐situ system provided better mechanical properties than that of ex‐situ system. Copyright © 2010 John Wiley & Sons, Ltd.     

1,3-二硫杂环戊烯-2-硫酮-4,5-二巯基类复合物在不同波长下的三阶非线性光学性质

合成了两种新的金属双噻吩类复合物:(苄基三乙基铵)双(1,3-二硫杂环戊烯-2-硫酮-4,5-二巯基)-金(BTEAADT)和(苄基三乙基铵)双(1,3-二硫杂环戊烯-2-硫酮-4,5-二巯基)-镍(BTEANDT).采用Z扫描方法,在皮秒脉冲下,分别测试了两种材料的乙腈溶液在532和1064nm的三阶非线性光学特性.Z扫描的结果表明,BTEAADT的乙腈溶液在532nm具有反饱和吸收效应,在1064nm非线性吸收效应可以忽略且在两种波长都有自散焦效应,三阶非线性折射率为负值.BTEANDT的乙腈溶液在532nm非线性吸收效应可以忽略,在1064nm具有饱和吸收效应且在两种波长都有自聚焦效应,三阶非线性折射率为正值.分析了造成这种差异的原因.经过计算得到了两种材料在532和1064nm的三阶非线性折射率,三阶非线性吸收系数,三阶非线性极化率和超极化率.BETAADT的非线性折射率在532nm为-1.685×10-18m2·W-1,在1064nm为-1.459×10-18m2·W-1;BTEANDT的非线性折射率在532nm为1.452×10-18m2·W-1,在1064nm为7.311×10-18m2·W-1.两种材料的三阶非线性吸收系数,三阶非线性极化率和超极化率的数量级分别是10-11m·W-1,10-13esu和10-31esu.结果表明这两种材料在非线性光学领域有潜在的应用价值.     

含金属笼型倍半硅氧烷的研究进展

倍半硅氧烷作为催化剂载体硅胶表面结构与性能研究的模型,可以通过表征其表面反应性质来直观认识硅胶负载型催化剂的作用机制。过去几十年来,倍半硅氧烷的研究呈现飞跃式的发展态势,开发出许多新化合物和新合成方法,并在一些催化过程中得到应用。将倍半硅氧烷作为金属化合物的配体,极大地丰富了元素化学的内容。本文重点介绍了合成含金属笼型倍半硅氧烷的相关进展,同时介绍了含金属笼型倍半硅氧烷在聚合物材料应用中的研究。     

Facile preparation of fullerenyl boronic esters

The fullerendiol C₆₀(OH)₂(OOt-Bu)₄ 1 reacts with various arylboronic acids ArB(OH)₂ to form fullerene-containing boronic esters C₆₀(O₂BAr)(OOt-Bu)₄ in up to 95% yield depending on the structure of aryl group. Bis(pinacolato)diboron (B(OCMe₂)₂)₂ also reacts with 1 to form C₆₀(O₂BB(OCMe₂)₂)(OOt-Bu)₄. The bisboronic ester C₆₀(O)(O₂BAr)₂(OOt-Bu)₂ was also obtained starting from a tetrahydroxyl fullerene derivative C₆₀(O)(OH)₄(OOt-Bu)₂. The fullerenyl boronic esters are moderately stable in air. Single crystal X-ray structure of C₆₀(O₂BPh)(OOt-Bu)₄ was obtained.     

242-260nm波长区CS2分子的多光子解离电离

在242－260nm波氏范围通过CS2分子的共振增强多光子电离（REMPI）获得了母体离子CS和碎片离子的分质量激发谱．在λ＜246.4nm区间，CS激发谱上呈现出来源于CS2双光子电离的弥散谱带,碎片离子激发谱的归属强烈提示多光子过程中有中性基电子态的CS和S（经由CS2的光解离）产生：（1）CS 的谱带主要来源于中性CS碎片经由单光子跃迁产生的（1＋1）共振增强电离，（2）除了部分S 的谱峰来自CS 的光解外，多数S 的锐谱峰来自中性S原子经由3p3（2D0）4p，3p3（4S0）np（n＝6，7，8）←3p43pJ（J＝2，1,0）双光子跃迁产生的（2＋1）共振增强电离．     

A laser flash photolysis study of amino acids and dipeptides using 4-nitroquinoline 1-oxide as a photosensitizer: The pH dependence

The pH effects on the photochemical reaction of amino acids and related dipeptides with 4-nitroquinoline 1-oxide (4NQO) as a photosensitizer have been investigated by laser flash photolysis. The obtained kinetic parameters show that the electron transfer from Tryptophan (Trp), Tyrosine (Tyr) as well as dipeptides containing Trp and/or Tyr residue to triplet 4NQO (^T4NQO) are efficient, but inefficient from methionine (Met) and dipeptides containing neither Trp nor Tyr. The result was supported by the calculated values of the free energy change from measured oxidation potentials for the electron transfer. It was demonstrated that Trp and Tyr residues are initial reaction sites with ^T4NQO, while Tyr/O^? radical may be final species for Trp-Tyr dipeptide. In acidic aqueous solutions, the self-quenching rate constants of ^T4NQO and the rate constants of electron transfer from amino acids to ^T4NQO decrease with decreasing pH. In alkaline solutions, amino acids are easily oxidized by 4NQO under irradiation of laser pulse, and no transient absorption signal was observed.     

有机金属衍生物α，β-［(RSn)3GeW9O37］7-的合成与性质研究

本文报道了α，β-M₄H₃［(RSn)₃GeW₉O₃₇］·nH₂O(M=Bu₄N⁺, Me₄N⁺; R=Bu, Ph)杂多配合物的合成、表征及催化性能研究、元素分析、红外光谱和紫外光谱、¹H、¹¹⁹Sn和¹⁸³W核磁共振谱、激光飞行时间(TOF)质谱和极谱数据表明，这些新化合物为三取代的Keggin结构，三个(RSn)³⁺属不同的M₃O₁₃单元并且彼此共角相连，标题杂多化合物主要以单体形式存在且对烯烃环氧化反应具有催化活性。     

纯二氧化钛介孔分子筛的合成与表征

分别用不同链长的烷基磷酸酯和脂肪胺两类不同表面活性剂为模板剂合成了纯二氧化钛介孔分子筛（Ti-TMS1，Ti-TMS2），并用溶剂法代替高温焙烧法成功地脱除了模板剂。用 XRD、TEM等测试手段对这类材料的结构进行了表征，研究了反应条件对所制备样品的结构的影响。结果表明：得到的纯二氧化钛介孔分子筛为较规则的六角堆积排列，孔径为2.7～4.4 nm, 且其纳米孔径大小可以通过改变烷基磷酸酯模板剂的烷基链长而调节。此外还发现，采用的烷基磷酸酯模板剂的烷基链越长，制得的二氧化钛介孔分子筛结构及晶型的完整性越好。进一步的研究表明，模板剂脱除之后，Ti-TMS2结构的晶体完整性和稳定性明显不如Ti-TMS1的好，且Ti-TMS1的介孔结构优于Ti-TMS2的介孔结构。     

庐山儿童发中微量元素与生长发育关系的调查

调查分析了庐山５０８名１－７岁儿童发中锌，铁，铜含量，并对其与儿童生长发育的关系进行了探讨。结果表明，微量元素与生长发育密切相关。