First observation of the P-wave spin-singlet bottomonium states hb(1P) and hb(2P)

We report the first observations of the spin-singlet bottomonium states h(b)(1P) and h(b)(2P). The states are produced in the reaction e(+)e(-)→h(b)(nP)π(+)π(-) using a 121.4 fb(-1) data sample collected at energies near the Υ(5S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. We determine M[h(b)(1P)]=(9898.2(-1.0-1.1)(+1.1+1.0)) MeV/c(2) and M[h(b)(2P)]=(10,259.8±0.6(-1.0)(+1.4)) MeV/c(2), which correspond to P-wave hyperfine splittings ΔM(HF)=(+1.7±1.5) and (+0.5(-1.2)(+1.6)) MeV/c(2), respectively. The significances of the h(b)(1P) and h(b)(2P) are 5.5σ and 11.2σ, respectively. We find that the production of the h(b)(1P) and h(b)(2P) is not suppressed relative to the production of the Υ(1S), Υ(2S), and Υ(3S).     

原子系统中偶极-偶极相互作用对量子存储支撑熵不确定度的调控研究

本文研究了Markovian过程和non-Markovian过程两种情况下,原子系统中偶极-偶极(D-D)相互作用和失谐量对两原子系统量子存储支撑(QMA)熵不确定度的调控作用.与Markovian过程相比,在non-Markovian过程中,由于库环境的记忆效应使得具有D-D相互作用的两原子系统QMA熵不确定度的演化行为呈现出振荡上升现象,且熵不确定度的上升趋势得到减缓,从而抑制了由系统量子噪声引起的退相干效应.此外,D-D相互作用对两原子系统QMA熵不确定度具有显著的调控能力,且D-D相互作用比失谐量的调控能力更强.     

一种电流引线的热力学计算方法

从超导磁体气冷电流引线的热平衡方程出发,对电流引线进行分段,提出了一种较为精确计算电流引线长横比及由电流引线末端流入低温容器热量的计算方法;电流引线中氦气流阻是设计电流引线时一个很重要的参数,由于电流引线片形状很复杂,计算其中氦气流阻比较好的方法是采用CFD软件Fluent。氦气模型单元数很庞大,因此对氦气模型进行了简化和分段,相邻两段模型间采用流量和压力边界条件进行耦合。     

基于遗传算法的多车体机器人路径规划方法

带拖车的移动机器人系统是一种复杂的多车体系统,在不同的转弯角度下所需的路径宽度也不同,其路径规划是个难题;在给出带拖车轮式移动机器人稳态和暂态过程运动学方程的基础上,推导得出了多车体移动机器人在最大转弯情况下所需的最大路径宽度,并将之定义为等效尺寸;应用遗传算法,提出了基于等效尺寸的多车体移动机器人的路径规划方法;首先通过等效尺寸的多步障碍扩张,对障碍物的临近区域和狭窄通道进行可行性约束的分析;然后应用遗传算法进行全局的路径规划,将路径的长度和宽度综合在适应度函数之中;在一定程度上,多车体移动机器人的路径规划问题得到解决;文章通过建立三维网格化地图,对障碍物的临近区域和狭窄的瓶颈通道区域进行了可行性约束的描述,遗传算法在较复杂的环境中实现了良好的避障,并得到了相对较短的有效路径。     

弯曲波导之间的耦合分析

采用极坐标下的光束传播法分析了两条平行变曲波导的中心间距、曲率半径等因素对模式耦合的影响,得到了耦合长度、耦合强度随中心间距、曲率半径的变化规律,并将直波导作为变曲波导的一种特殊情况进行了分析.     

Active noise attenuation in ventilation windows

The feasibility of applying active noise control techniques to attenuate low frequency noise transmission through a natural ventilation window into a room is investigated analytically and experimentally. The window system is constructed by staggering the opening sashes of a spaced double glazing window to allow ventilation and natural light. An analytical model based on the modal expansion method is developed to calculate the low frequency sound field inside the window and the room and to be used in the active noise control simulations. The effectiveness of the proposed analytical model is validated by using the finite element method. The performance of the active control system for a window with different source and receiver configurations are compared, and it is found that the numerical and experimental results are in good agreement and the best result is achieved when the secondary sources are placed in the center at the bottom of the staggered window. The extra attenuation at the observation points in the optimized window system is almost equivalent to the noise reduction at the error sensor and the frequency range of effective control is up to 390 Hz in the case of a single channel active noise control system.     

低温下Er3+/Yb3+共掺碲酸盐玻璃的发光特性研究

研究了在8—300K温度范围中, Er³⁺/Yb³⁺共掺碲酸盐玻璃的15μm荧光光谱、上转换光谱与温度的关系. Er³⁺:⁴I_13/2→⁴I_15/2跃迁发射光谱通过高斯拟合和简单的四能级系统估计了Er³⁺离子⁴I_13/2和⁴ 关键词： 碲酸盐玻璃 上转换发光 低温 荧光特性     

B与N掺杂对单层石墨纳米带自旋极化输运的影响

通过第一性原理计算研究了具有锯齿状边沿并且具有反铁磁构型的单层石墨纳米带的自旋极化输运.研究发现,在中心散射区同一位置掺入单个B和N原子,尽管对整个体系磁矩的影响完全相同,但对两个自旋分量电流的影响却完全相反.掺B时,自旋向上的电流显著大于自旋向下的电流;而掺N时,自旋向下的电流显著大于自旋向上的电流.这是由于不管掺B还是掺N都将打破自旋简并,使得导带和价带中自旋向上的能级比自旋向下的能级更高.掺B引入空穴,使完全占据的价带变为部分占据,从而自旋向上的能级正好处于费米能级,使得电子透射能力更强、电流更大,而自旋向下的能级则离费米能级较远使电子透射的能力较弱.掺N则引入电子,使得原来全空的导带变为部分占据,从而费米能级穿过导带中自旋向下的能级,使得自旋向下的电子比自旋向上的电子透射能力更强. 关键词： 自旋极化输运 单层石墨纳米带 第一性原理 非平衡格林函数     

A family of single‐isomer,dicationic cyclodextrin chiral selectors for capillary electrophoresis: Mono‐6A‐ammonium‐6C‐butylimidazolium‐β‐cyclodextrin chlorides

The first member of the single‐isomer, dicationic cyclodextrin (CD) family, 6^A‐ammonium‐6^C‐butylimidazolium‐β‐cyclodextrin chlorides (AMBIMCD), has been synthesized, analytically characterized, and used to separate a variety of acidic enantiomers and amino acids by CE. Starting from mono‐6^A‐azido‐β‐cyclodextrin, the cationic imidazolium and ammonium moieties were subsequently introduced onto primary ring of β‐cyclodextrin via nucleophilic addition and Staudinger reaction. The analytically pure AC regio‐isomer CD was further obtained via column chromatography. This dicationic CD exhibited excellent enantioselectivities for selected analytes at concentration as low as 0.5 mM, which were even better than those of its mono‐imidazolium or ammonium‐substitued counterpart CDs at 10 equivalent concentrations. The effective mobilities of all studied analytes were found to decrease with the concentration of AMBIMCD. Inclusion complexation in combination with eletrostatic interactions seemed to account for the enhanced chiral discrimination process.     

Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.