Relativistic multiconfiguration Hartree–SFock by means of direct perturbation theory

A relativistic direct perturbation theory approach has been implemented at the multiconfiguration Hartree–Fock level into the numerical program package LUCAS. The method has been applied to the closed-shell Be, Zn, Cd, and Hg atoms and to the rare gases Ne to Rn. The scalar relativistic valence-correlation correction to the rare gases is found to be very small, while for Zn, Cd, and Hg the first-order relativistic corrections to the valence-correlation energy are calculated to be −4.6, −6.3, and −17.4 mH, respectively. © 1997 John Wiley & Sons, Inc. Int J Quant Chem 65 : 151–158, 1997     

New polymer electrolyte membranes for low temperature fuel cells

Partially fluorinated proton exchange materials were synthesised by pre-irradiation grafting of styrene into poly(vinylidene fluoride) films with subsequent sulfonation. The grafted and sulfonated membranes, PVDF-g-PSSA membranes, have been studied with respect to water uptake, ion and water clustering, ion conductivity and water diffusion coefficients. Water associates with the membranes in three different ways: bound non-freezable water, freezable bound water and freezable free water. The proton conductivity of the membrane is strongly dependent on the hydration, it decreases more rapidly than the water self diffusion with decreasing water content. Ion clusters with a Bragg distance of 25 Å form the conducting channels in the membranes.     

RNA-mediated synthesis of palladium nanoparticles on Au surfaces

RNA catalysts for the shape-controlled synthesis of Pd particles from the precursor complex trisdibenzylideneacetone dipalladium ([Pd2(DBA)3] were recently discovered in our laboratory (J. Am. Chem. Soc. 2005, 127, 17814-17818). In the work described here, RNA codes for hexagonal Pd platelets and Pd cubes were covalently immobilized on gold surfaces and evaluated for their activity toward particle synthesis. When coupled to gold via oligoethylene glycol linkers, both RNA sequences were able to catalyze the formation of Pd particles with the same shape control previously observed in solution. For low surface coverages, the average distance between RNA molecules on the surface was estimated at ca. 300 nm, yet large (e.g., dimensions of hundreds of nanometers) Pd hexagons and cubes still formed. This surprising result suggests that a single RNA molecule may be sufficient for nucleating and controlling the shapes of these particles. Finally, the use of surface-bound RNA as a tool for directing the orthogonal synthesis of materials on surfaces was demonstrated. Patterning the RNA code for Pd hexagons next to the code for Pd cubes, followed by incubation in a solution containing [Pd2(DBA)3], resulted in the spontaneous formation of spatially distinct spots of hexagonal and cubic particles.     

The argon nuclear quadrupole moments

New standard values -116(2) mb and 76(3) mb are suggested for the nuclear quadrupole moments (Q) of the ³⁹Ar and ³⁷Ar nuclei, respectively. The Q values were obtained by combining optical measurements of the quadrupole coupling constant (B or eqQ/h) of the 3s²3p⁵4s[3/2]₂ (³P^o) and 3s²3p⁵4p[5/2]₃ (³D^e) states of argon with large scale numerical complete active space self-consistent field and restricted active space self-consistent field calculations of the electric field gradient at the nucleus (q) using the LUCAS code, which is a finite-element based multiconfiguration Hartree–Fock program for atomic structure calculations.     

Computational studies of nonstoichiometric sodium auride clusters

The molecular structures of low-lying isomers of anionic and neutral sodium auride clusters have been studied computationally at the second-order M?ller-Plesset perturbation theory level using quadruple-ζ basis sets augmented with a double set of polarization functions. The first vertical detachment energies were calculated at the M?ller-Plesset level as the energy difference between the cluster anion and the corresponding neutral cluster. The photodetachment energies of higher-lying ionization channels were calculated by adding electronic excitation energies of the neutral clusters to the first vertical detachment energy. The excitation energies were calculated at the linear response approximate coupled-cluster singles and doubles level using the anionic cluster structures. The obtained ionization energies for NaAu(-), NaAu(2)(-), NaAu(3)(-), NaAu(4)(-), Na(2)Au(2)(-), Na(2)Au(3)(-), Na(3)Au(3)(-), and Na(2)Au(4)(-) were compared to values deduced from experimental photoelectron spectra. Comparison of the calculated photoelectron spectra for a few energetically low-lying isomers shows that the energetically lowest cluster structures obtained in the calculations do not always correspond to the clusters produced experimentally. Spin-component-scaled second-order M?ller-Plesset perturbation theory calculations shift the order of the isomers such that the observed clusters more often correspond to the energetically lowest structure, whereas the spin-component-scaled approach does not improve the photodetachment energies of the sodium aurides. The potential energy surface of the sodium aurides is very soft, with several low-lying isomers requiring an accurate electron correlation treatment. The calculations show that merely the energetic criterion is not a reliable means to identify the structures of the observed sodium auride clusters; other experimental information is needed to ensure a correct assignment of the cluster structures. The cluster structures of nonstoichiometric anionic sodium aurides have been determined by comparing calculated ionization energies for low-lying structures of the anionic clusters with experimental data.     

Radiation‐grafted ion‐exchange membranes: Influence of the initial matrix on the synthesis and structure

A series of commercial fluoropolymer films was irradiated with an electron beam, grafted with styrene, and sulfonated. The influence of the initial fluoropolymer on the grafting yields and the properties of the grafted and sulfonated membranes were investigated. The same synthesis procedure can be followed for most fluoropolymers and samples with a similar degree of grafting, and a homogenous polystyrene distribution can be prepared by varying the absorbed dose. The main difference among different fluoropolymer‐based membranes is the water uptake from liquid water that has a roughly linear dependence on the crystallinity of the sample. The more amorphous the initial material, the greater the water uptake. Mechanical properties of the membranes at 50% relative humidity differ less than those of the starting materials and are comparable to those of Nafion® 105. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3008–3017, 2001     

A modified variation–perturbation approach to zero-point vibrational motion

We present a detailed investigation of the perturbation approach for calculating zero-point vibrational contributions to molecular properties. It is demonstrated that if the sum of the potential energy and the zero-point vibrational energy is regarded as an effective potential energy, the leading contribution to the first-order wave function vanishes in the perturbation approach. Two different perturbation approaches have been investigated numerically by calculations of some magnetic properties for a few diatomic molecules and the results obtained have been compared to the exact numerical results. It is shown that only a few terms need to be included in a perturbation expansion to obtain an accuracy in the calculated rovibrational contribution better than the quality normally obtained for the potential and property surfaces in electronic structure calculations. Received: 16 April 1999 / Accepted: 1 July 1999 / Published online: 4 October 1999     

Molecular Dynamic Simulation of Side-Chain Liquid Crystalline Elastomer

Summary: Molecular dynamic simulation of side chain liquid crystalline elastomer has been carried out. As an initial state a flexible polymer network in a low molecular liquid-crystal (LC) solvent was used. The LC solvent comprises of anisotropic rod-like semiflexible linear molecules (mesogens) composed of particles bonded into the chain by FENE potential. Rigidity of LC molecules was induced by a bending potential. All interactions between nonbonded particles are described by a repulsive Lennard-Jones potential. For the systems with different values of density and order parameter obtained after sufficiently long trajectory the attachment of ends of mesogens to the polymer network was simulated. The kinetic of the process of mesogens attachment to network was studied as well as morphology of attachment. The structural and dynamical behaviour of side chain LC elastomer was studied and compared with systems of polymer network in low molecular LC solvent.     

预试环实验

本文叙述加热场与垂直场分开供电后预试环所作的氢气击穿、平衡、杂散场测量、垂直场波形调整和放电清洗等实验。得到了重复性较好的托卡马克等离子体,其电流峰值为10kA,持续时间2.5ms。     

Synthesis of proton‐conducting membranes by the utilization of preirradiation grafting and atom transfer radical polymerization techniques

The atom transfer radical polymerization (ATRP) of styrene onto poly(vinylidene fluoride)‐graft‐poly(vinylbenzyl chloride) (PVDF‐g‐PVBC) membranes was investigated. Novel membranes were designed for fuel‐cell applications. The benzyl chloride groups in the PVDF‐g‐PVBC membranes functioned as initiators, and a Cu‐based catalytic system with the general formula Cu(n)X_n/ligand [where X is Cl or Br and the ligand is 2,2′‐bipyridyl (bpy)] was employed for the ATRP. In addition, 10 vol % dimethylformamide was added for increased solubility of the catalyst complex in styrene. The system was homogeneous, except for the membrane, when the initiator/copper halide/ligand/monomer molar ratio was 1/1/3/500. As anticipated, the fastest polymerization rate of styrene was observed with the copper bromide/bpy‐based catalyst system. The reaction rate was strongly temperature‐dependent within the studied temperature interval of 100–130 °C. The degree of grafting increased linearly with time, thereby indicating first‐order kinetics, regardless of the polymerization temperature. Furthermore, 120 °C was the maximum polymerization temperature that could be used in practice because the membrane structure was destroyed at higher temperatures. The degree of styrene grafting reached 400% after 3 h at 120 °C. Such a high degree of grafting could not be reached with conventional uncontrolled radiation‐induced grafting methods because of termination reactions. On the basis of an Arrhenius plot, the activation energy for the homogeneous ATRP of styrene was 217 kJ/mol. The prepared membranes became proton‐conducting after sulfonation of the polystyrene grafts. The highest conductivity measured for the prepared membranes was 70 mS/cm, which is comparable to the values normally measured for commercial Nafion membranes. The scanning electron microscopy/energy‐dispersive X‐ray results showed that the membranes had to be grafted through the matrix with both PVBC and polystyrene to become proton‐conducting after sulfonation. In addition, PVDF‐g‐[PVBC‐g‐(styrene‐block‐tert‐butyl acrylate)] membranes were also synthesized by ATRP. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 591–600, 2002; DOI 10.1002/pola.10146