丹麦生物质发电的现状和研究发展趋势

丹麦是世界上利用秸秆生物质燃烧发电技术开发、运行最好的国家，其经验值得中国借鉴。根据作者在丹麦对生物质燃烧发电的研究经历，系统地介绍了丹麦在秸秆生物质发电的经验、遇到的问题及相应的研究和今后的发展方向。     

2D层状焦磷酸锰(Ⅱ)[NH4]2[Mn3(P2O7)2(H2O)2]的结构和磁性研究

A two-dimensional layered manganese(Ⅱ) pyrophosphate, [NH₄]₂[Mn₃(P₂O₇)₂(H₂O)₂] (1), has been synthesized hydrothermally. Its structure is determined by single-crystal X-ray diffraction analysis. Its structure is built up by MnO₆ octahedra and P₂O₇ units, with ammonium NH₄⁺ cations residing in the interlayer regions. The manganese pyrophosphate layer consists of infinite chains of cis and trans edge sharing MnO₆ octahedra linked by P₂O₇ units. Magnetic susceptibility measurements show that this compound exhibits ferrimagnetic-like ordering below 3.2 K. Further study shows that there are two possible superexchange pathways via the oxygen anions in Mn²⁺ ions. Owing to the different bridging modes of O^2-, the competition between ferromagnetic interactions and antiferromagnetic interactions in Mn²⁺ ions results in the ferrimagnetic behavior of 1.     

Characterization and application of d-amino acid oxidase and catalase within permeabilized <Emphasis Type="Italic">Pichia pastoris</Emphasis> cells in bioconversions

The high-density fermentation of recombinant Pichia pastoris was carried out in a 1-L fermentor. After 60 h of fermentation, the activities of D-amino acid oxidase (DAAO) and catalase assayed with the permeabilized cells attained 12,532 and 684,800 U/L, respectively. Additionally, the stability of DAAO and catalase within the permeabilized cells was relatively high. The half-life of the two enzymes reached 14.5 and 4.0 d at 30 degrees C, respectively. Furthermore, these permeabilized cells could convert D-phenylalanine into 99% phenylpyruvate within 100 min and could be efficiently reused up to 13 cycles. After being treated with base and heating, these treated permeabilized cells could be reused up to three cycles in a batchwise conversion of cephalosporin C, and about 90% 7-beta-(4-carboxybutanamido)-cephalosporanic acid was ultimately obtained at each cycle.     

Studies on lignan constituents from Schisandra chinensis (Turcz.) Baill. fruits using high-performance liquid chromatography/electrospray ionization multiple-stage tandem mass spectrometry

A reversed-phase high-performance liquid chromatography-diode array detector-electrospray ionization multiple-stage tandem mass spectrometry (RP-HPLC-DAD-ESI-MS(n)) method has been developed for the detection and analysis of lignan constituents in the methanol extract from the fruits of Schisandra chinensis (Turcz.) Baill. RP-HPLC-DAD-ESI-MS(n) and electrospray ionization Fourier transform ion cyclotron resonance multiple-stage tandem mass spectrometry (ESI-FT-ICR-MS(n)) have been applied to investigate the characteristic product ions of four lignan reference compounds. Then, the logical fragmentation pathways of the lignans have been proposed. By comparing the retention time (t(R)) of HPLC, the ESI-MS(n) data and the structures of analyzed compounds with the data of reference compounds and in the literature, 11 peaks in HPLC have been unambiguously identified and another 5 peaks have been tentatively identified or deduced. Also, in the present paper, the extracted ion chromatograms (EIC) have been used to analyze the lignan isomers. The experimental results demonstrate that RP-HPLC-DAD-ESI-MS(n) is a specific and useful method for the identification of the lignan constituents and their isomers.     

DNA mutation detection with chip-based temperature gradient capillary electrophoresis using a slantwise radiative heating system

A simple and robust chip-based temperature gradient capillary electrophoresis (TGCE) system was developed for DNA mutation/single-nucleotide polymorphism (SNP) analysis using a radiative heating system. Reproducible, stable and uniform temperature gradients were established along a 3 cm length of the electrophoretic separation channel using a single thermostated aluminium heater plate. The heater was slightly slanted relative to the plane of the glass chip at 0.2-1.3 degrees by inserting thin spacers between the plate and chip at one end to produce differences in radiative heating that created the temperature gradient. On-chip TGCE analyses of 4 mutant DNA model samples amplified from plasmid templates, each containing a single base substitution, with a wide range of melting temperatures, showed that mutations were successfully detected under a wide temperature gradient of 10 degrees C and within a short gradient region of about 3 cm (3.3 degrees C cm(-1) gradient). The radiative heating system was able to establish stable spatial temperature gradients along short microfluidic separation channels using simple peripheral equipment and manipulation while ensuring good resolution for detecting a wide range of mutations. Effectiveness of the system was demonstrated by the successful detection of K-ras gene mutations in 6 colon cancer cell lines.     

Algorithm for processing raw mass spectrometric data to identify and quantitate complex lipid molecular species in mixtures by data-dependent scanning and fragment ion database searching

We developed the Lipid Qualitative/Quantitative Analysis (LipidQA) software platform to identify and quantitate complex lipid molecular species in biological mixtures. LipidQA can process raw electronic data files from the TSQ-7000 triple stage quadrupole and LTQ linear ion trap mass spectrometers from Thermo-Finnigan and the Q-TOF hybrid quadrupole/time-of-flight instrument from Waters-Micromass and could readily be modified to accommodate data from others. The program processes multiple spectra in a few seconds and includes a deisotoping algorithm that increases the accuracy of structural identification and quantitation. Identification is achieved by comparing MS(2) spectra obtained in a data-dependent manner to a library of reference spectra of complex lipids that we have acquired or constructed from established fragmentation rules. The current form of the algorithm can process data acquired in negative or positive ion mode for glycerophospholipid species of all major head-group classes.     

Adlayer structures of aza- and/or oxo-bridged calix[2]arene[2]triazines on Au(111) investigated by scanning tunneling microscopy (STM)

The adlayers formed by a series of aza- and/or oxo-bridged calix[2]arene[2]triazines on Au(111) surfaces were investigated by scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. 1,3-Alternate configurations of these molecules are preserved on gold surfaces as in their three-dimensional crystals. STM images show that the cavity sizes of these molecules are finely tuned by substituting the bridging nitrogen atom with oxygen atoms, which change the strengths and densities of the intermolecular hydrogen bonds. Hydrogen bond interaction influences the molecular orientation and conformation in the adlayers, and it plays a key role in the formation of these two-dimensional supramolecular architectures. Coadsorption of calix[2]arene[2]triazine with 1,3,5-tris(5-carboxyamyloxy)benzene (TCAB) intervenes with the intermolecular hydrogen bond formations among the calix[2]arene[2]triazine molecules and consequently causes a conformational transition of the calixarene molecules from rhombic to square. These results demonstrate the role of hydrogen bonds in molecular assembly formations.     

Mesoporous TiO2/SiO2 composite nanofibers with selective photocatalytic properties

Mesoporous TiO2/SiO2 composite nanofibers with a diameter of 100-200 nm and silica shell thickness of 5-50 nm have been fabricated by a sol-gel combined two-capillary co-electrospinning method; the composite nanofibers exhibited selective photocatalytic activity based on the decomposition of Methylene Blue, Active Yellow and Disperse Red.     

Continuous blood cell separation by hydrophoretic filtration

We propose a new hydrophoretic method for continuous blood cell separation using a microfluidic device composed of slanted obstacles and filtration obstacles. The slanted obstacles have a larger height and gap than the particles in order to focus them to a sidewall by hydrophoresis. In the successive structure, the height and gap of the filtration obstacles with a filtration pore are set between the diameters of small and large particles, which defines the critical separation diameter. Accordingly, the particles smaller than the criterion freely pass through the gap and keep their focused position. In contrast, the particles larger than the criterion collide against the filtration obstacle and move into the filtration pore. The microfluidic device was characterized with polystyrene beads with a minimum diameter difference of 7.3%. We completely separated polystyrene microbeads of 9 and 12 microm diameter with a separation resolution of approximately 6.2. This resolution is increased by 6.4-fold compared with our previous separation method based on hydrophoresis (S. Choi and J.-K. Park, Lab Chip, 2007, 7, 890, ref. 1). In the isolation of white blood cells (WBCs) from red blood cells (RBCs), the microfluidic device isolated WBCs with 210-fold enrichment within a short filtration time of approximately 0.3 s. These results show that the device can be useful for the binary separation of a wide range of biological particles by size. The hydrophoretic filtration as a sample preparation unit offers potential for a power-free cell sorter to be integrated into disposable lab-on-a-chip devices.