Quantitative immunoassay for determining polyaromatic hydrocarbons in electrical insulating oils

The development and application of a combined sample extraction and immunoassay protocol for the quantification of polyaromatic hydrocarbons (PAHs) in transformer oils is reported. Tests were performed on 12 different used transformer oils from three major manufacturers. The removal of matrix interferents was achieved by loading oil fractions onto silica solid phase extraction cartridges and eluting with non-polar solvent prior to evaporation and reconstitution in a more polar medium. Extracts were immunoassayed using two commercially available PAH test kits either having broad specificity towards priority PAHs or enhanced binding specificity toward more carcinogenic PAHs. The total and carcinogenic PAH test kits yielded PAH levels in the oil extracts 5.86-fold and 126-fold lower than the industry-standard IP346 method. The latter method, widely used by the industry, since it correlates with biological carcinogenicity tests, grossly over-estimates PAH levels in oils since it is a non-specific gravimetric solvent extraction approach. The assay was found to be unaffected by the extract sample matrix and was capable of determining PAHs at the nanogram per millilitre level. The assay protocol was simple, low-cost and rapid (<2 h) and equally amenable to operation at remote sites or high-throughput sample screening. The binding specificity of the total anti-PAH antibody was examined by preparing and loading an anti-PAH immunosorbent with oil, prior to solvent displacement of antibody-bound compounds and by gas chromatography (GC)–mass spectrometry (MS) analysis.     

A continuous monitor for assessment of 222Rn in the coastal ocean

Radon-222 is a good natural tracer of groundwater flow into the coastalocean. Unfortunately, its usefulness is limited by the time consuming natureof collecting individual samples and traditional analysis schemes. We demonstratehere an automated system which can determine, on a continuousbasis, the radon activity in coastal ocean waters. The system analyses ²²²Rn from a constant stream of water passing through an air-water exchangerthat distributes radon from the running flow of water to a closed air loop.The air stream is feed to a commercial radon-in-air monitor which determinesthe concentration of ²²²Rn by collection and measurement of theemitting daughters, ²¹⁴Po and ²¹⁸Po, via a charged semiconductordetector. Since the distribution of radon at equilibrium between the air andwater phases is governed by a well-known temperature dependence, the radonconcentration in the water is easily calculated.     

Photocatalytic Effects of Rutile Phase TiO2 Ultrafine Powder with High Specific Surface Area Obtained by a Homogeneous Precipitation Process at Low Temperatures

The photocatalytic characteristics of nanostructured TiO₂ ultrafine powder with rutile phase produced using the homogeneous precipitation process at low temperatures (HPPLT) were compared with those of commercial P-25 TiO₂ powder by flame hydrolysis. The TiO₂ powder by the HPPLT showed much higher photoactivity in the removal rate, showing lower pH values in the solution than the P-25 powder when eliminating metal ions such as Pb and Cu from the aqueous metal-EDTA solutions. This can be inferred as the more rapid photo-oxidation or -reduction of metal ions from the aqueous solution, together with relatively higher efficiencies in the use of an electron-hole pair formed on the surface of the TiO₂ particles under UV light irradiation. Also, in the view of the TiO₂ particle morphology, compared to the well-dispersed spherical P-25 particles, the agglomerated TiO₂ secondary particles by the HPPLT consist of acicular typed primary particles with a thickness in the range of 3–7 nm and the primary particles radialize in all directions, which would be more effective to photocatalytic reactions without the large electron-hole recombination on the surface of the TiO₂ particle under UV light irradiation. It can be, therefore, thought that the higher photoactivity of the rutile TiO₂ powder by the HPPLT in the aqueous solutions results mainly from having a larger surface area by the acicular shaped primary particles with very thin thickness and radialization in all directions.     

Characterization of the Converging Jet Region in a Triple Torch Plasma Reactor

Enthalpy probe measurements were taken of the converging plasma plume in a triple torch plasma reactor and related to substrate heat flux measurements. Results show excellent entrainment of process gases injected into the converging plasma plume by way of the central injection probe. At lower pressures (40 kPa), the plasma volume is equivalent to at least a 3 cm diameter, 4 cm long cylinder, with relatively uniform temperature, velocity, and substrate heat flux profiles when compared to a typical dc arc jet. Converging plasma plume size, substrate heat flux, and enthalpy profiles are also shown to be a strong function of applied system power. Substrate heat flux measurements show smaller radial gradients than enthalpy probe measurements, because of the high radial velocity component of gases above the substrate boundary layer. Enthalpy probe measurements were also conducted for diamond deposition conditions and approximate temperature and velocity profiles obtained. Problems with the uniform gas mixture assumption prohibited more accurate measurements. Reproducibility of enthalpy measurement results was shown with an average standard deviation of 11.8% for the velocity and 7.6% for the temperature measurements.     

Induction and Acceleration of Bonelike Apatite Formation on Tantalum Oxide Gel in Simulated Body Fluid

Untreated tantalum metal forms bonelike apatite layer on its surface in a simulated body fluid (SBF) after a long period. The apatite formation on the tantalum metal is significantly accelerated, when the metal was previously subjected to NaOH and heat treatments to form an amorphous sodium tantalate on its surface. The fast formation of the apatite on the NaOH- and heat-treated tantalum metal was explained as follows. The sodium tantalate on the surface of the metal releases the Na⁺ ion via exchange with H₃O⁺ ion in SBF to form a lot of Ta-OH groups on its surface. Thus formed Ta-OH groups induce the apatite nucleation and the released Na⁺ ion accelerates the apatite nucleation by increasing ionic activity product of the apatite in SBF due to increase in OH^– ion concentration. In the present study, in order to confirm this explanation, apatite formations on sodium tantalate gels with different Na/Ta atomic ratios, which were prepared by a sol-gel method were investigated. It was found that even Na₂O-free tantalum oxide gel forms the apatite on its surface in SBF. This proves that the Ta-OH groups abundant on the gel can induce the apatite nucleation. The apatite-forming ability of the gels increased with increasing Na/Ta atomic ratios of the gels. The sodium-containing tantalum oxide gels released the Na⁺ ion, the amount of which increased with increasing Na/Ta atomic ratios of the gels. The released Na⁺ ion gave an increase in pH of SBF. These results prove that the apatite nucleation induced by the Ta-OH groups is accelerated with the released Na⁺ ion by increasing ionic activity product of the apatite in SBF.     

Modification of aqueous polyurethanes by forming latex interpenetrating polymer networks with polystyrene

A series of latex particles with interpenetrating polymer network structure have been synthesized from waterborne polyurethane (PU) and polystyrene (PS). The effect of PU/PS composition, cross-linking density in the PS domain as well as in PU have been studied in terms of dispersion size, transmission electron microscopy morphology, mechanical and dynamic mechanical properties in addition to swellability in water and toluene of the dispersion cast film. It was found that inverted core (PS)–shell (PU) morphology was well defined and that the domain size as well as the film properties were well controlled by the latex composition and cross-linking density of both phases. Received: 15 March 2000 Accepted: 21 February 2001     

Cobalt activation of Bacillus BR449 thermostable nitrile hydratase expressed in Escherichia coli

Expression of nitrile hydratase enzymes utilized in a new “green” process for acrylamide production has proven difficult in Escherichia coli owing to lack of a cobalt transport system to introduce the required cobaltion into this host. We describe the expression of a thermostable nitrile hydratase from a moderatethermophile Bacillus sp. BR449 in E. coli in which the cobaltrequired for enzyme activation is introduced by incubation, of the apoenzyme in the presence of Co⁺⁺ ion at 50°C, yielding active and thermostable, enzyme.     

Photoreaction of 2-halo-N-pyridinylbenzamide: intramolecular cyclization mechanism of phenyl radical assisted with n-complexation of chlorine radical

The photochemical behavior of 2-halo-N-pyridinylbenzamide (1-4 in Chart 1) was studied. The photoreaction of 2-chloro-N-pyridinylbenzamides 1a, 2a, 3a, and 4 afforded photocyclized products, benzo[c]naphthyridinones (6-9 and 16), in high yield, whereas the bromo analogues 1b, 2b, and 3b produced extensively photoreduced products, N-pyridinylbenzamides (1c, 10, and 11), with minor photocyclized product. Since the photocyclization reaction of 2-chloro-N-pyridinylbenzamide is retarded by the presence of oxygen and sensitized by the presence of a triplet sensitizer, acetone or acetophenone, a triplet state of the chloro analogue is involved in the reaction. Since several radical intermediates, particularly n-complexes of chlorine radical, are identified in the laser flash photolysis of 2-chloro-N-pyridinylbenzamide, an intramolecular cyclization mechanism of phenyl radical assisted with n-complexation of chlorine radical for the cyclization reaction is proposed: the triplet state (78 kcal/mol) of the chloro analogue (1a), which is populated by the excitation of 1a undergoes a homolytic cleavage of the C-Cl bond to give phenyl and chlorine radicals; while chlorine radical holds the neighbor pyridinyl ring with its n-complexation, the intramolecular arylation of the phenyl radical with the pyridinyl ring proceeds to produce a conjugated 2,3-dihydropyridinyl radical and then the conjugated radical aromatizes to afford a cyclized product, benzo[c]naphthyridinone by ejecting a hydrogen. The photoreduction product can be formed by hydrogen atom abstraction of the phenyl sigma radical from the environment.     

Influences of Heating Condition and Substrate-Surface Roughness on the Characteristics of Sol-Gel-Derived Hydroxyapatite Coatings

A prepared transparent HA solution was coated on Ti6Al4V substrates by a spin-coating technique. The crystallization of the sol-gel-derived HA coated on the metallic substrates could be done at relatively low firing temperatures (as low as 600°C). The characteristics of the HA-coated layer were dependent on the surface roughness of substrates and heating conditions such as firing temperature, holding time, heating rate, and atmosphere. The heat treatment at a slow heating rate (<2°C/min.) and a long heating time (>10 hrs) at 600°C in air produced the uniform surface and improved the crystallinity. The HA layer coated on 20 m grit-blasted substates was more uniform and had fever cracks after firing, compared with that coated on 100 m grit-blasted rougher substrates.     

Synthesis of optically active 2-alkyl-3,4-iminobutanoic acids. Beta-amino acids containing an aziridine heterocycle

All four stereoisomers of 2-alkyl-3,4-iminobutanoic acid, a novel class of beta-amino acids bearing a chemically versatile aziridine ring, were synthesized starting with aspartic acid. The synthetic strategy involves the introduction of an alkyl group at the beta-position of fully protected optically active aspartic acid followed by the construction of an aziridine ring making use of the alpha-carboxylate and alpha-amino groups. The alpha-carboxylate was reduced to the corresponding alcohol, which was then subjected to cyclization to form an aziridine ring with the N-protected amino group. Removal of the protection groups yielded the target compounds.