Effects of cell-wall acetate,xylan backbone,and lignin on enzymatic hydrolysis of aspen wood

Aspen wood substrates with varying degrees of deacetylation, xylan, and lignin removal have been prepared and submitted to enzymatic hydrolysis with a cellulase/hemicellulase preparation for an extended constant period of hydrolysis. Controlled deacetylation has been achieved by treating wood with various alkali metal hydroxide solutions, at various alkali/wood ratios. It has been found that samples with the same extent of deacetylation produce the same sugar yields upon enzymatic hydrolysis. Increased degree of deacetylation increases the yield of sugars obtained from enzymatic hydrolysis, all other compositional parameters held constant. The acetyl group removal is proportional to the stoichiometric relation between added base and wood acetyl content, i.e., the same number of milliequivalents of base/weight of wood remove the same extent of acetyl groups, regardless of the concentration of the base solution. No cation effects are found among Li, Na, and K alkali hydroxide solutions, suggesting that swelling is not as important a parameter as is the removal of the acetyl groups from the xylan backbone in determining the extent of hydrolyzability of the resulting sample.     

Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

Reactivity of pyrrole pigments,part 15: On the oxidation of bilirubins and biliverdins

Summary Characteristic oxidation reactions of bilin-1,19-diones (biliverdins) and biladien-ac-1,19-diones (bilirubins) were reinvestigated. These include bromine and iodine oxidation of biliverdin IX, bilirubin IX and their Zn(II) complexes, the reaction described by Siedel (1941) of mesobilirubin XIII dimethyl ester with nitric acid (Gmelin reaction) and Smith's oxidation (1977) of etiobiliverdin IV using Tl triacetate and Pb tetra-acetate. For some of these reaction products new structures were assigned on the basis of their spectrometric data. These structures agreed with the expected reactivity pattern of biliverdins and bilirubins.

---

Reaktivität von Pyrrolpigmenten, 15 Mitt.: Über die Oxidation von Bilirubinen und Biliverdinen

Zusammenfassung Einige bekannte Oxydationen von Bilin-1,19-dionen (Biliverdinen) und Biladien-ac-dionen (Bilirubinen) wurden neuerlich untersucht, und zwar die Brom- und Jodoxydation von Biliverdin IX und Bilirubin IX sowie der entsprechenden Zn(II)-Komplexe, die Reaktion des Dimethylesters von Mesobilirubin XIII mit HNO₃ (Gmelinreaktion; Siedel 1941) und Smith's Oxydation von Etiobiliverdin IV mit Thaliumtriacetat und Bleitetraacetat. Für einige Reaktionsprodukte wurden aufgrund spektroskopischer Daten neue Strukturen-konsistent mit dem bekannten Reaktionsverhalten von Biliverdinen und Bilirubinen-formuliert.

     

Oxidative addition of the ethane C-C bond to Pd. An ab initio benchmark and DFT validation study

We have computed a state-of-the-art benchmark potential energy surface (PES) for the archetypal oxidative addition of the ethane C-C bond to the palladium atom and have used this to evaluate the performance of 24 popular density functionals, covering LDA, GGA, meta-GGA, and hybrid density functionals, for describing this reaction. The ab initio benchmark is obtained by exploring the PES using a hierarchical series of ab initio methods [HF, MP2, CCSD, CCSD(T)] in combination with a hierarchical series of five Gaussian-type basis sets, up to g polarization. Relativistic effects are taken into account either through a relativistic effective core potential for palladium or through a full four-component all-electron approach. Our best estimate of kinetic and thermodynamic parameters is -10.8 (-11.3) kcal/mol for the formation of the reactant complex, 19.4 (17.1) kcal/mol for the activation energy relative to the separate reactants, and -4.5 (-6.8) kcal/mol for the reaction energy (zero-point vibrational energy-corrected values in parentheses). Our work highlights the importance of sufficient higher angular momentum polarization functions for correctly describing metal-d-electron correlation. Best overall agreement with our ab initio benchmark is obtained by functionals from all three categories, GGA, meta-GGA, and hybrid DFT, with mean absolute errors of 1.5 to 2.5 kcal/mol and errors in activation energies ranging from -0.2 to -3.2 kcal/mol. Interestingly, the well-known BLYP functional compares very reasonably with a slight underestimation of the overall barrier by -0.9 kcal/mol. For comparison, with B3LYP we arrive at an overestimation of the overall barrier by 5.8 kcal/mol. On the other hand, B3LYP performs excellently for the central barrier (i.e., relative to the reactant complex) which it underestimates by only -0.1 kcal/mol.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

工科学校本科生科研训练与实践——以节能减排大赛为例

Scientific research training is an essential part of undergraduate learning, which plays an important role in improving students' knowledge utilization and scientific literacy. Taking the participation process of "Energy conservation and emission reduction competition" as an example, this paper briefly introduces the undergraduate scientific research training of students majoring in polymer materials and engineering from their own perspective, and the way to combine the discipline and school characteristics to reflect the thinking of engineering students in scientific research and practical application.     

Design of molecular two-photon probes for in vivo imaging. 2H-Benzo[h]chromene-2-one derivatives

2H-Benzo[h]chromene-2-one derivatives showing appreciable water solubility, significant two-photon cross sections, high photostability, cell permeability, low toxicity, and ability to be converted to a protein TP probe have been developed by incorporating all of the needed functions within a small molecule.     

Synthesis and antitumor activity of camptothecin- 4β-triazolopodophyllotoxin conjugates

Abstract

Two new compounds (9 and 10) having a camptothecin (CPT) analog conjugated to the 4β-azido-4-deoxypodophyllotixin analog by untilizing the copper-catalyzed azide-alkyne cycloadditon (CuAAC) reaction, and were evaluated for their cytotoxicity against a panel of five human cancer cell lines (HL-60, SMMC-7721, A-549, MCF-7 and SW480) using the MTT (3-(4,5-dimethyl-thiahiazo-2-yl)-2,5-diphenyltetrazolium bromide) assay. Two novel conjugates shown weak cytotoxicity, compound 10 showed highly potent against HL-60 cell line tested, with IC₅₀ value 17.69?±?0.19?μM. This compound suggested its potential as anticancer agents for further development.

     

Modulation of the electronic structure of semiconducting nanotubes resulting from different metal contacts

Examined in this paper is the role of the metal electrode influencing the structure and electronic properties of semiconducting carbon nanotubes near the interface at low bias. Specifically, we present quantum-chemical calculations of finite sections of a (8,0) semiconducting single wall nanotube contacted with gold and palladium clusters. The calculations at the density functional level of theory, which included full geometry optimizations, indicate the formation of bonds between the metal atoms of the electrode and the carbon atoms of the nanotube. The local work function of the metal electrode can be expected to exhibit significant variations as a result of this bond formation. Compared to the gold-contacted nanotubes, the palladium-contacted nanotubes have a small but interesting increase in both length and diameter. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the gold-contacted nanotube are shown localized at the edges. In contrast, the HOMO and LUMO of the palladium-contacted nanotube are extended over the entire nanotube and the metal cluster contacted to it, providing thereby a better conduction path in the contact region of the electrode and the nanotube. The involvement of the highly directional d orbitals in the interactions involving the palladium cluster leads to an enhanced pi electron density in the nanotube. This enhanced pi electron density is synonymous with an improved electron transmission.