Fe-Ni-B-O纳米合金的合成及其催化制氢性能的研究

Preparation and catalytic performance of Fe-Ni-B-O nano-alloy having crystal-palpus structure has been studied. Black powder was synthesized by reducing mixture solution of Fe²⁺, Ni²⁺ with KBH₄ as reducing agent and polyethylene glycol as dispersant. Fe-Ni-B-O nano-alloy of crystal-palpus structure was obtained after hydrogen reduction of black powder. TEM shows that crystal-palpus length is 200～400 nm, diameter is 2～4 nm. The analytic results indicate that the total content of Fe and Ni is 86.6%, B is 5.08%. The alloy exhibits excellent catalytic performance. Hydrogen generation rate can approach 100% especially when pH is 8.     

几种常见水果的微量元素分析

运用原子吸收分光光度法测定了几种常见水果中部分微量元素含量。其中榴莲的Mg、Zn、Cu、K含量位于四种水果之首。美国提子中Ca含量最高，芒果中Fe含量最高。以上差别具有统计学意义。六种元素的回收率为90％-106．5％。连续6次测定样品，变异系数(CV)为0．96％。     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

A vacuum ultraviolet photoionization mass spectrometric study of acetone

The photoionization and dissociative photoionization of acetone have been studied at the photon energy range of 8-20 eV. Photoionization efficiency spectra for ions CH3COCH3+, CH3+, C2H3+, C3H3+, C3H5+, CH(2-)CO+, CH3CO+, C3H4O+, and CH3COCH2+ have been measured. In addition, the energetics of the dissociative photoionization has been examined by ab initio Gaussian-3 (G3) calculations. The computational results are useful in establishing the dissociation channels near the ionization thresholds. With the help of G3 results, the dissociation channels for the formation of the fragment ions CH3CO+, CH2CO+, CH3+, C3H3+, and CH3COCH2+ have been established. The G3 results are in fair to excellent agreement with the experimental data.     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.     

{[Gd(DMF)_3(DMSO)(H_2O)_3](μ-CN)[Fe(CN)_5]}·2H_2O的合成,结构表征和磁性(英文)

0IntroductionThefirstmolecule鄄basedmagnetswerereportedin1986[1].Duringthelasttwodecades,moreandmoreattentionhasbeenpaidtothesynthesisofmolecule鄄basedmagnets,especiallytoPrussianBlueanalogu鄄es[2].TheoldPrussianBlueanalogueshavebeenbroughtuptodateduetoth…     

超声提取-超高效液相串联质谱分析沉积物中15种抗生素

在现有方法基础上对沉积物中磺胺类、喹诺酮类、大环内脂类和四环素类抗生素的提取、富集、净化以及仪器分析方法进行了优化。以EDTA-Mcllvaine缓冲溶液与乙腈(V:V,1:1)混合液作为提取液,利用超声波细胞破碎仪进行超声提取,串联强阴离子交换柱(SAX)和HLB固相萃取柱进行固相萃取(SPE),通过超高效液相/串联质谱(UPLC-MS/MS)测定沉积物中抗生素的含量。抗生素基质加标回收率在56.4%~110%,相对标准偏差为1.1%~24.3%,方法检出限0.0055~0.716 ng/g。本方法有效地提高了沉积物中抗生素的提取效率,并应用于实际样品的测定中。     

典型无机含氧酸自由基的特性

碳酸自由基、硝酸自由基、磷酸自由基和硫酸自由基是化学反应的重要中间体，都具有氧化性，对污染物在自然和人为环境中的迁移转化会产生重要的影响.文中较为详细地介绍这几种自由基的电极电位、产生方式、检测方法及与有机物的反应方式.总结四种自由基的特性及与有机物的反应方式可发现，四种自由基和羟自由基电极电位不同，导致它们和有机物反应速率的不同；碳酸自由基并不是羟自由基去除剂，对于一些容易被氧化的化合物，碳酸自由基氧化效果比羟自由基好；四种自由基均可由羟自由基转化而来，并且这四种自由基和羟自由基与有机物反应方式基本一致，都通过电子转移、夺氢和加成的方式进行.可以预测四种自由基和羟自由基降解有机物的机理将非常相似，今后应研究四种自由基与羟自由基相互转化的规律，以及与代表性有机物的反应机理.     

Enzymatic kinetic of cellulose hydrolysis

The ethanol effect on the Trichoderma reesei cellulases was studied to quantify and clarify this inhibition type. To determine inhibition parameters of crude cellulase and purified exoglucanase Cel7A, integrated Michaelis-Menten equations were used assuming the presence of two inhibitors: cellobiose as the reaction product and ethanol as a possible bioproduct of cellulose fermentation. It was found that hydrolysis of cellulose by crude enzyme follows a model that considers noncompetitive inhibition by ethanol, whereas Cel7A is very slightly competitively inhibited. Crude cellulase is much more inhibited (K _iul=K _icl=151.9 mM) than exoglucanase Cel7A (K _icl=1.6 × 10¹⁵ mM). Also, calculated inhibition constants showed that cellobiose inhibition is more potent than ethanol inhibition both for the crude enzyme as well as exoglucanase Cel7A.