Polyelectrolytes as new matrices for secondary ion mass spectrometry

Significant enhancements in ion yields in time-of-flight secondary ion mass spectrometry (TOF-SIMS) are observed when water-soluble analytes are mixed with a polyelectrolyte, e.g., poly(diallyldimethylammonium chloride) or poly(sodium 4-styrenesulfonate), and then deposited in the layer-by-layer method on a surface. This previously unobserved effect is demonstrated for 5-chloro-8-methoxyquinoline appended diaza-18-crown-6, 5-(2-aminoethoxy)methyl-5-chloro-8-methoxyquinoline appended diaza-18-crown-6, acridine, 9-anthracenecarboxylic acid, and ferrocenecarboxylic acid. By optical ellipsometry film thicknesses range from ca. 5-20 angstroms. X-ray photoelectron spectroscopy shows significantly less analyte in the polyelectrolyte-analyte films than in the neat analytes. However, TOF-SIMS generally shows significant enhancements in ion yields from the polyelectrolyte films compared with either the neat compounds or the compounds solubilized with acid or base and then dried on a surface. These significant enhancements in ion yields also appear to extend to analyte fragments and cationized molecular species. Some enhancement is also observed for dried droplets of analytes mixed with a polyelectrolyte on surfaces.     

Efficient Radical Coupling of Organobromides Using Dimanganese Decacarbonyl

Wurtz-type radical coupling of a variety of allylic and benzylic bromides was observed on irradiation with dimanganese decacarbonyl in excellent yield (77-99%). Efficient cross-coupling of two different bromides was also readily achieved.     

Damage Assessment of Reinforced Concrete Structures Using Fractal Analysis of Residual Crack Patterns

Currently, assessing the performance and safety of reinforced concrete structures relies on routine-based visual inspection (VI). Cracks width measurements are commonly used as a convenient indicator of damage; however other factors, such as distribution and pattern of the cracks should be considered equally important in measuring the extent of damage present in the structure. As a result, condition assessed by VI is subjective in nature and depends on the experience, knowledge, expertise, and judgment of the inspector carrying out the assessment. A new approach based on the fractal analysis of residual crack patterns is proposed in this paper to assess the structural integrity of reinforced concrete elements. A new damage index is presented to quantitatively perform a damage classification. The methodology is validated through experimental studies on two large-scale reinforced concrete shear walls subjected to a displacement controlled reversed cyclic loading. Damage grades are also identified based on width of cracks and proposed damage index (DI). The results demonstrate a more accurate estimation of damage grades using DI. Furthermore, it is demonstrated that the DI can estimate the relative stiffness loss of the specimens with acceptable accuracy.     

Influence of monomer type on miniemulsion polymerization systems stabilized by graphene oxide as sole surfactant

Based on a recent report [J. Polym. Sci. Part A. Polym. Chem. 2013 , 51, 47–58] whereby we demonstrated the synthesis of polystyrene nanoparticles by miniemulsion polymerization stabilized by graphene oxide (GO) nanosheets as sole surfactant, we hereby report the synthesis of hybrid polymer nanoparticles of several members of the (meth)acrylate family as well as the cross‐linker divinylbenzene via the same approach. The nature of the resultant emulsion is strongly linked to the polarity of the monomer used; monomers with a relatively small polar component (based on Hansen solubility parameters) such as lauryl methacrylate and benzyl methacrylate, in addition to styrene, generate stable emulsions that can be effectively polymerized. Particularly polar monomers (e.g., methyl acrylate and methyl methacrylate) formed kinetically stable emulsions in the presence of GO, however rapid coagulation occurred during polymerization. Electron microscopy analysis reveals the formation of polymer nanoparticles with size distribution between 200 and 1000 nm with roughened surface morphologies, indicative of GO sheets adsorbed at the interface. The results of this work demonstrate the applicability of this synthetic route for specific monomers in the preparation of novel graphene‐based polymeric materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5153–5162     

Ein neuer Apparat zur volumetrischen Kohlenstoffbestimmung

Ohne Zusammenfassung     

NMR investigation of effect of dissolved salts on the thermoresponsive behavior of oligo(ethylene glycol)‐methacrylate‐based polymers

The synthesis of thermo‐ and ionic‐responsive copolymers based on polyethylene glycol methyl ether methacrylate (OEGMA) and 2,2,2‐trifluoroethyl acrylate (TFEA) via reversible addition‐fragmentation chain transfer polymerization is described. Reactivity ratios for the copolymerization of OEGMA and TFEA are r_OEGMA = 2.46 and r_TFEA = 0.22, indicating that OEGMA is incorporated more rapidly than TFEA monomers. The copolymers are thermosensitive and exhibit volume phase transitions (lower critical solution behavior) at temperature, which depend on copolymer composition and the presence of added salts in the aqueous solutions. It was found that the copolymers exhibited LCST transitions at temperatures below 353 K only in salt solutions. ¹H NMR measurements indicated that motion of the protons located in and near the hydrophobic main chain are more sensitive to temperature than protons in the hydrophilic OEGMA side chains. The hydrophilic side chains remain largely hydrated; however, the presence of two distinct conformations of the terminal groups of the side chains was confirmed. The influence of OEGMA side chain length, copolymer composition, and salt type on aggregation behavior and dynamics was examined in detail. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2375–2385     

Water‐soluble,thermoresponsive, hyperbranched copolymers based on PEG‐methacrylates: Synthesis,characterization, and LCST behavior

A series of water‐soluble thermoresponsive hyperbranched copoly(oligoethylene glycol)s were synthesized by copolymerization of di(ethylene glycol) methacrylate (DEG‐MA) and oligo(ethylene glycol) methacrylate (OEG‐MA, M_w = 475 g/mol), with ethylene glycol dimethacrylate (EGD‐MA) used as the crosslinker, via reversible addition fragmentation chain transfer polymerization. Polymers were characterized by size exclusion chromatography and nuclear magnetic resonance analyses. According to the monomer composition, that is, the ratio of OEG‐MA: DEG‐MA: EGD‐MA, the lower critical solution temperature (LCST) could be tuned from 25 °C to 90 °C. The thermoresponsive properties of these hyperbranched copolymers were studied carefully and compared with their linear analogs. It was found that molecular architecture influences thermoresponsive behavior, with a decrease of around 5–10 °C in the LCST of the hyperbranched polymers compared with the LCST of linear chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2783–2792, 2010     

Asymmetric Substitutions of 2‐Lithiated N‐Boc‐piperidine and N‐Boc‐azepine by Dynamic Resolution

Proton abstraction of N‐tert‐butoxycarbonyl‐piperidine (N‐Boc‐piperidine) with sBuLi and TMEDA provides a racemic organolithium that can be resolved using a chiral ligand. The enantiomeric organolithiums can interconvert so that a dynamic resolution occurs. Two mechanisms for promoting enantioselectivity in the products are possible. Slow addition of an electrophile such as trimethylsilyl chloride allows dynamic resolution under kinetic control (DKR). This process occurs with high enantioselectivity and is successful by catalysis with substoichiometric chiral ligand (catalytic dynamic kinetic resolution). Alternatively, the two enantiomers of this organolithium can be resolved under thermodynamic control with good enantioselectivity (dynamic thermodynamic resolution, DTR). The best ligands found are based on chiral diamino‐alkoxides. Using DTR, a variety of electrophiles can be used to provide an asymmetric synthesis of enantiomerically enriched 2‐substituted piperidines, including (after Boc deprotection) the alkaloid (+)‐β‐conhydrine. The chemistry was extended, albeit with lower yields, to the corresponding 2‐substituted seven‐membered azepine ring derivatives.     

Effect of visible light on normal and P23H-3 transgenic rat retinas: characterization of a novel retinoic acid derivative present in the P23H-3 retina

Transgenic rats with the P23H mutation in rhodopsin exhibit increased susceptibility to light damage, compared with normal animals. It is known that light-induced retinal damage requires repetitive bleaching of rhodopsin and that photoreceptor cell loss is by apoptosis; however, the underlying molecular mechanism(s) leading to photoreceptor cell death are still unknown. Photoproducts, such as all-trans retinal or other retinoid metabolites, released by the extensive bleaching of rhodopsin could lead to activation of degenerative processes, especially in animals genetically predisposed to retinal degenerations. Using wild-type and transgenic rats carrying the P23H opsin mutation, we evaluated the effects of acute intense visible light on retinoid content, type and distribution in ocular tissues. Rats were exposed to green light (480-590 nm) for 0, 5, 10, 30 and 120 min. Following light treatment, rats were sacrificed and neural retinas were dissected free of the retinal pigment epithelium. Retinoids were extracted from retinal tissues and then subjected to HPLC and mass spectral analysis. We found that the light exposure affected relative levels of retinoids in the neural retina and retinal pigment epithelium of wild-type and P23H rat eyes similarly. In the P23H rat retina but not the wild-type rat retina, we found a retinoic acid-like compound with an absorbance maximum of 357 nm and a mass of 304 daltons. Production of this retinoic acid-like compound in transgenic rats is influenced by the age of the animals and the duration of light exposure. It is possible that this unique retinoid may be involved in the process of light-induced retinal degeneration.