海藻酸钠-乙酸乙烯酯均相接枝共聚物合成及性能评价

本文采用了均相接枝共聚的方法合成了疏水改性的海藻酸钠-乙酸乙烯酯共聚物(SA-g-PVAc)。使用红外光谱、元素分析、凝胶渗透色谱手段对产物接枝度、溶解性能、分子量进行了评价,并考察了相关性能的变化规律。     

AM/AA/DMDAAC/OAM疏水缔合的两性共聚物的合成及性能研究

以十八醇为原料,制备长链疏水单体N-十八烷基丙烯酰胺(OAM)。以丙烯酰胺(AM)、丙烯酸(AA)、二甲基二烯丙基氯化铵(DMDAAC)、N-十八烷基丙烯酰胺(OAM)为单体,通过胶束聚合法合成了水溶性疏水缔合两性四元共聚物。利用FT-IR、1HNMR、DTA-TG对聚合物的结构和热稳定性进行分析,考察了疏水基团摩尔分数、聚合物浓度对聚合物溶液表观粘度、储能模量、耗能模量等流变性能的影响,并对四元共聚物溶液的性能进行评价。结果表明,疏水两性共聚物具有很好的耐温、抗盐、耐剪切等优异性能。     

澳洲茄胺单糖苷的合成及其抗肿瘤活性

以单糖为原料,经苯甲酰化保护和溴代制备中间体酰化溴代糖(3a～3e)。通过Koenigs-Knorr合成法将3a～3e与澳洲茄胺甙化缩合并脱保护合成了5个澳洲茄胺单糖苷化合物(5a～5e,5d和5e为新化合物),其结构经1H NMR,13C NMR和MS表征。用MTT法对5a～5e进行体外抗肿瘤细胞活性试验结果表明,5c和5d显示了较好的抗肿瘤活性。     

合成伏格列波糖的工艺改进

对合成伏格列波糖的工艺进行了改进。以葡萄糖为起始原料,经12步反应合成了伏格列波糖,总收率25.3%,其结构经1H NMR和13C NMR确证。     

巨介电CCTO及CCTO/聚合物研究

具有类钙钛矿结构的钛酸铜钙CaCu3Ti4O12(CCTO)介电陶瓷材料以其巨介电特性、介电常数的温度和频率稳定性及非线性等特性在材料研究领域和实际应用中受到广泛关注。本文比较了CCTO各种巨介电理论和模型,详述了目前能够较合理地解释CCTO巨介电特性的内部阻挡层电容模型(IBLC)。综述了制备方法、制备条件及改性方法对CCTO介电性能的影响。离子掺杂是降低CCTO介电损耗常用的方法之一,掺杂效果受掺杂离子半径、离子价态等多种因素的影响。将陶瓷粉体与聚合物进行复合形成0-3型复合材料是目前制备综合性能良好的介电材料的有效方法,对CCTO/聚合物复合材料的研究进展进行了评述。最后,展望了CCTO陶瓷材料的发展前景。     

A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.     

Relationship Between the Polymer Structures and Destabilization of Polymer‐Containing Water‐in‐Oil Emulsions

The viscous properties, scanning electronic microscopy (SEM), and water/oil interfacial tension (IFT) of partially hydrolyzed polyacryamide (HPAM) and hydrophobically associating hydrolyzed polyacryamides modified with N‐dodecylacrylamide were studied with the objective of investigating the influence on destabilization of emulsions. As expected, the copolymers exhibit significant viscosity enhancing capacity and three‐dimensional network structures due to intermolecular hydrophobic associations, and also present high interfacial activities as the IFT decrease with increasing polymer concentration. As a result, the existences of copolymers increased both the viscosity of emulsions and the intensity of interfacial film, in which case slow down the diffusion of demulsifier molecules and enhance the stability of emulsions, finally, the separation of water from oil becomes more difficult.     

超临界水中钾对甲醛降解过程影响的研究

为掌握生物质中钾对生物质超临界水降解过程的影响,选择生物质气化转化过程中生成的重要小分子中间产物甲醛作为研究对象,研究不同工艺条件下(反应温度400～650℃、压力23～29 MPa、停留时间4～12 s),单一钾成分(KHCO₃/K₂CO₃/KCl)或混合钾成分(KHCO₃、K₂CO₃、KCl)对甲醛超临界水降解气体产物的影响。结果表明,KHCO₃、K₂CO₃、KCl、混合钾均降低了气体产物中CO的体积分数,提高了CO₂的体积分数,但KCl的影响程度弱于其他三种钾成分。此外,由于不同钾成分均不利于气体产物中CO和H₂体积分数的提高,从而使得气体产物的热值降低。KHCO₃、K₂CO₃、KCl、混合钾均降低了H₂、CO、CO₂的产率以及气化率,其对H₂产率以及气化率的抑制程度从大到小依次为:混合钾、KHCO₃、K₂CO₃、KCl,且提高反应温度、延长反应停留时间时抑制气体生成的作用相对越明显。而当反应压力改变时,钾成分对H₂产率及气化率的影响程度变化较小。较高反应温度、较高反应压力、较长停留时间时,混合钾中各成分出现协同作用,明显抑制了气体产物的生成。     

碳酸钾催化的铁基氧载体煤催化化学链燃烧

研究了K₂CO₃催化剂及惰性担体对铁基氧载体煤化学链燃烧的影响.实验结果表明,K₂CO₃的添加可明显促进铁基氧载体与煤之间的反应速率,其原因可归结为从氧载体上迁移到煤颗粒上的K₂CO₃对煤-CO₂气化步骤的催化作用(该步骤为整个还原过程的速率控制步骤);由于K₂CO₃本身的促熔效果及加入K₂CO₃后导致的剧烈氧化还原反应,可以发现,K₂CO₃会增大铁基氧载体的烧结;不同惰性担体对铁基氧载体与煤的反应性影响不大,这是由于惰性担体对还原速控步没有影响;K₂CO₃在多循环化学链燃烧过程中依然可以保持一定的催化活性,另外由于催化剂的流失与失活,使得氧载体的反应活性有所下降.     

电喷雾电离源测定印刷线路板阵列离子阱的分析性能

电喷雾电离源(ESI)测定了印刷线路板材料制成的四通道PCB矩形离子阱中一个通道的的分析性能。结果表明,质谱峰检测到的离子信号的种类和强度明显受到离子动能的影响。当离子动能低于18 eV,则得到的质谱峰主要为精氨酸Arg离子(m/z 175.2),增加其离子动能则Arg离子(m/z 175.2)易碎裂,发生脱胍基、脱水等反应。在正弦波的射频模式下测定了离子质量隔离和离子质量选择激发,以SWIFT缺口频率为50～60 kHz,75～85 kHz和130～145 kHz分别隔离了m/z 175.2,117.3和71.8的离子;用频率为55、80和135 kHz的正弦波(振幅为1.0 V)选择激发弹出了m/z 175.2,117.3和71.8的离子。在氦气气氛下,频率为102 kHz正弦波可以使得Arg离子(m/z 175.2)发生碎裂,得到m/z 157.2,130.3和117.3碎片离子。电流积分法的测定结果表明,在256 kHz共振激发时离子测定效率为46.3%,在边界弹出时,离子测定效率约为9.7%。