Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

离子色谱法测定护发和皂类产品中羟乙磷酸及其盐类

研究并建立了护发和皂类产品中羟乙磷酸及其盐类的离子色谱测定方法。将护发和皂类样品分散于3mmol/L盐酸中,于振荡器上振摇至完全溶解,护发和皂类样品提取液分别调节pH值至2.5和5.5,依次过尼龙滤膜和OnGuardⅡRP固相萃取柱。滤液采用离子色谱-抑制电导检测法分析测定,以IonPac AS11-HC阴离子交换色谱柱分离,40mmol/L氢氧化钾溶液为淋洗液等度洗脱,ASRS-400阴离子型抑制电导检测,外标法定量。方法的线性范围为0.5～8.0mg/L,相关系数为0.9999,对羟乙磷酸的定量限为0.025%,护发产品在低、中、高3种加标水平的回收率为84.0%～93.5%,相对标准偏差为1.3%～3.0%;皂类产品在低、中、高3种加标水平的回收率为81.4%～92.3%,相对标准偏差为1.8%～5.1%。该法准确、简便、快速,可用于护发和皂类产品的实际检测。     

固相金属亲和层析纯化全长人PPARγ重组蛋白

建立全长人PPARγ重组蛋白的固相金属亲和层析纯化方法.利用E.coli BL21 (DE3)细胞外源性表达出全长人PPARγ重组蛋白,采用固相金属亲和层析法纯化目标蛋白.通过考察咪唑浓度对纯化的影响,确定在8 mol/L尿素下,用含50 mmol/L咪唑的缓冲液冲洗,200mmol/L咪唑缓冲液洗脱,可获得纯度为95％的目标蛋白,透析复性后经放射配体受体饱和结合实验测定全长人PPARγ重组蛋白的解离常数Kd为106士6nmol/L.结果表明本文所建立的方法能够成功纯化出高纯度的目标蛋白,经复性后,可获得用于结构和功能研究的全长人PPARγ重组蛋白.     

聚丙烯及增韧剂对复合材料熔接痕强度的影响

研究了聚丙烯基体的熔体粘度(以熔体流动速率表征)、增韧剂POE的粘度(以门尼粘度表征)、增韧剂POE的含量等因素对聚丙烯复合材料熔接痕强度的影响。结果表明:聚丙烯基体/增韧剂的粘度比越小,聚丙烯复合材料的熔接痕强度越高,即聚丙烯粘度越小、增韧剂粘度越大,整个复合材料的熔接痕强度越高;增韧剂POE的含量越大复合材料的熔接痕强度越小。     

海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

Co/SBA-16:对柴油组分有高选择性的费托合成催化剂(英文)

使用浸渍法制备了一系列Co/SBA-16催化剂,并通过氮物理吸附、X射线衍射、氢程序升温还原、氢化学吸附和透射电镜技术对催化剂行了表征。研究表明,随着负载钴含量的增加,金属钴的分散度降低了,这是同Co3O4晶粒增长和比表面积降低相一致的。Co/SBA-16催化剂展示了高的一氧化碳转化率,低的C1选择性和高的C5+选择性,特别对柴油组分有高选择性。     

Organometallic titanocene complex as highly efficient bifunctional catalyst for intramolecular Mannich reaction

Bifunctional catalysts bearing two catalytic sites, Lewis acidic organometallic titanocene and Brønsted acidic COOH, have been assembled in situ from Cp₂TiCl₂ with carboxylic acid ligands, showing high catalytic activity over an intramolecular Mannich reaction towards synthesis of 2‐aryl‐2,3‐dihydroquinolin‐4(1H)‐ones. The determination of the bifunctional catalyst Cp₂Ti(C₈H₄NO₆)₂ was elucidated by single X‐ray HR‐MS and investigation of catalytic behavior. In particular, masking the Brønsted acidic COOH catalytic site with dormant COOMe lowered the reaction yield greatly, indicating that two catalytic sites work together to maintain high catalytic efficiency.     

面向远海岛礁群的双向物流网络规划

针对若干远海岛礁群系统封闭性的分布特点,将中心岛礁选址、各岛礁建设泊位数量和规模、仓库储存量、运输船型和数量以及航线设置、班期组织等作为规划内容,以整个运输网络系统总成本最低为原则,综合考虑了仓库存储理论,建立了兼顾“选址-库存-路径”的规划模型。结合所建模型特点,提出了双层并行搜索遗传算法,构建了以海上运输为基本交通方式的双向物流系统。最后,以我国南海为例进行建模并求解,采用不同算法并通过多组不同规模的算例进行演算比较,验证了所建模型和算法的有效性与合理性。     

Alcohol/water-soluble porphyrins as cathode interlayers in high-performance polymer solar cells

Three alcohol/water-soluble porphyrins,Zn-TPy PMe I:zinc(II)meso-tetra(N-methyl-4-pyridyl)porphyrin tetra-iodide,ZnTPy PAd Br:zinc(II)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide and Mn Cl-TPy PAd Br:manganese(III)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide were employed as cathode interlayers to fabricate polymer solar cells(PSCs).The PC71BM([6,6]-phenyl C71 butyric acid methyl ester)and PCDTBT(poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)])-blend films were used as active layers in polymer solar cells(PSCs).The PSCs with alcohol/water-soluble porphyrins interlayer showed obviously higher power conversion efficiency(PCE)than those without interlayers.The highest PCE,6.86%,was achieved for the device with Mn ClTPy PAd Br as an interlayer.Ultraviolet photoemission spectroscopic(UPS),carrier mobility,atomic force microscopy(AFM)and contact angle( )characterizations demonstrated that the porphyrin molecules can result in the formation of interfacial dipole layer between active layer and cathode.The interfacial dipole layer can obviously improve the open-circuit voltage(Voc)and charge extraction,and sequentially lead to the increase of PCE.     

Isobutane Dehydrogenation Assisted by CO2 over Silicalite‐1‐Supported ZnO Catalysts: Influence of Support Crystallite Size

The ZnO catalysts supported on Silicalite‐1 zeolites with different crystallite sizes (0.08, 0.35, 1 and 1.7 μm, respectively) and 5% Zn were synthesized via an incipient wetness method. The catalysts were characterized by XRD, N₂ adsorption, SEM, TEM‐EDX, DRIFT spectra and NH₃‐TPD, and their catalytic performance in isobutane dehydrogenation assisted by CO₂ was investigated. The catalytic activity is strongly dependent on the crystallite size of Silicalite‐1 support. The ZnO/S‐1‐0.35 catalyst with ca. 0.35 μm crystallite size displays the highest activity, affording an initial isobutane conversion of 51.0% and 74.5% isobutene selectivity. This can be attributed to a higher amount of acid sites present on this catalyst as well as the largest amount of nest silanols possessed by the S‐1‐0.35 support.