Electron Acceleration and Bunch Generation by Intense Femtosecond Laser Pulse in Preplasma of a Target

We present analytical studies of electron acceleration in the low-density preplasma of a thin solid target by an intense femtosecond laser pulse. Electrons in the preplasma are trapped and accelerated by the ponderomotive force as well as the wake field. Two-dimensional particle-in-cell simulations show that when the laser pulse is stopped by the target, electrons trapped in the laser pules can be extracted and move forward inertially. The energeticelectron bunch in the bubble is unaffected by the reflected pulse and passes through the target with small energy spread and emittance. There is an optimal preplasma density for the generation of the monoenergetic electron bunch if a laser pulse is given. The maximum electron energy is inverse proportion to the preplasma density.     

卫星搭载紫花苜蓿种子的拉曼光谱分析

为了了解卫星搭载对紫花苜蓿种子化学特性的影响,揭示空间诱变机理,文章利用傅里叶变换拉曼光谱法对卫星搭载当代的紫花苜蓿种子进行了研究。结果表明,与地面对照相比,飞行组在358和553 cm-1处的峰强增加,814,1 122,1 531,1 743 cm-1处的峰强降低,通过谱带归属发现,增强的358和553 cm-1分别与DNA和Ca2+有关,降低的4个峰与糖类、脂类有关。这说明经过卫星搭载后,苜蓿种子的DNA和Ca2+的量出现增加趋势,糖类与脂类的量出现降低趋势。其可能原因是(1)种子主动修复诱变产生的DNA损伤时,消耗部分贮存能量所致;(2)空间飞行过程中的超重导致种子细胞内的Ca2+ 浓度升高;(3)飞行因子导致种子提前萌发,DNA大量合成与复制,种子储藏的能量提前降解消耗。这一结果将对苜蓿空间诱变机理研究有重要参考价值。     

氮化硼纤维先驱体的制备与表征

以三氯环硼氮烷为原料, 将其与正丙胺/异丙胺进行共取代反应, 制得了不同结构的取代单体, 再经热聚合反应获得了相应的聚硼氮烷先驱体. 通过分析不同正丙胺/异丙胺配比制得的聚合产物的组成与结构, 探讨了不同单体的胺基取代基对先驱体的聚合反应性及对产物结构的影响. 结果表明, 当正丙胺/异丙胺摩尔比为2∶1, 聚合温度为150 ℃, 反应时间为10 h时, 合成产物具有近似线性分子结构, 熔点为90 ℃, 具有良好的成丝性, 可获得平均直径10~20 μm, 组成为BC_1.27N_1.52H_x的先驱体纤维, 先驱体纤维再经不熔化处理及1200 ℃氨气高温煅烧等工艺可获得近化学计量比的氮化硼纤维.     

Three dimensional study of harmonic operation at the Shanghai deep ultraviolet free electron laser

With the right choice of parameters in the free electron laser (FEL) scheme, the undulator can be primarily operated at high order harmonic modes and the harmonic radiation is expected to be significantly enhanced. Recently, the possibility of proof-of-principle harmonic operation experiments on the basis of the Shanghai deep ultraviolet (SDUV) FEL test facility has been studied. In this paper, the principle of harmonic operation, three dimensional numerical approaches, and detailed performances of proposed harmonic operation at SDUV FEL are presented.     

Ultra-high order harmonic generation via a free electron laser mechanism

In this paper,by using the"frequency up-conversion"principle with a high gain harmonic generation free electron laser and an external seed laser,we consider the possibility of modulating a relativistic electron beam on the attosecond scale,so that it can produce coherent spontaneous radiation from the deep ultraviolet to the hard X-ray spectral region with a very short radiator.Analytical estimation and three-dimensional numerical modeling show the great potential to reach ultra-high harmonics up to several thousand.For an electron bunch with the typical quality as in the free electron laser scheme and a seed laser with 800 nm wavelength,0.8 nm attosecond trains with alterable duration and GW scale peak power are modeled.The output radiation exhibits good shot-to-shot stability,full coherence and perfect tuning ability between the discrete harmonics of the seed frequency.     

血管内皮细胞糖萼与力传导

血管内皮细胞糖萼是位于内皮细胞顶膜的一层绒毛状多糖蛋白复合结构,是血管壁的选择性通透屏障.主要在协助红细胞顺利通过毛细血管、抑制血细胞对内皮的粘附及信号传递等过程中发挥重要的生理作用.大量研究证据表明糖萼可能还参与了内皮细胞对剪切力的感受和传导.在简要介绍了糖萼的结构及生理功能的基础上,本文着重对糖萼在力传导方面的研究进展进行了综述.     

桅杆结构静力分析简化计算方法

通过整体分析,推导出空间单索在任意荷载作用下的静力计算公式和空间索单元的非线性刚度方程,在此基础上,给出桅杆结构静力分析简化计算的非线性方程式。     

利用蒙特卡洛方法计算陶瓷刀具磨损可靠性

在连续切削条件下,陶瓷刀具的失效形式是以磨粒磨损为主的摩损失效,其磨损寿命由材料的断裂韧性、硬度和切削过程的参数决定,利用蒙特卡洛方法分别随机生成断裂韧性与硬度的样本值,利用连续车削试验确定切削过程参数,将得到的样本值与切削参数相结合可计算刀具在相应切削条件下的磨损寿命及其可靠性,计算结果表明：陶瓷刀具的断裂韧对磨损寿命的可靠性影响较为明显,因而可以利用断裂韧性来估算磨损可靠性。     

乘子罚函数分光光度法同时测定复方阿斯匹林片中的三组分含量

用乘子罚函数法处理多波长分光光度数据同时测定复方阿斯匹林片中三组分的含量,模拟样品中阿斯匹林、非那西丁、咖啡因的平均回收率分别为100．4％、99．78％、100．6％,相对标准偏差分别为0．45％、0．56％、1．17％。对4个批号实际样品中的测定结果与标准方法的测定结果吻合。     

静电演示教具的发展与创新

静电演示实验在教学中的作用是电脑动画不能取代的;静电演示教具由于采用现代高压静电电源有了质的飞跃;指出静电演示教具的创新要遵循的几条原则。