Rational syntheses of porphyrins bearing up to four different meso substituents

Porphyrins bearing specific patterns of substituents are crucial building blocks in biomimetic and materials chemistry. We have developed methodology that avoids statistical reactions, employs minimal chromatography, and affords up to gram quantities of regioisomerically pure porphyrins bearing predesignated patterns of up to four different meso substituents. The methodology is based upon the availability of multigram quantities of dipyrromethanes. A procedure for the diacylation of dipyrromethanes using EtMgBr and an acid chloride has been refined. A new procedure for the preparation of unsymmetrical diacyl dipyrromethanes has been developed that involves (1) monoacylation with EtMgBr and a pyridyl benzothioate followed by (2) introduction of the second acyl unit upon reaction with EtMgBr and an acid chloride. The scope of these acylation methods has been examined by preparing multigram quantities of diacyl dipyrromethanes bearing a variety of substituents. Reduction of the diacyl dipyrromethane to the corresponding dipyrromethane-dicarbinol is achieved with NaBH(4) in methanolic THF. Porphyrin formation involves the acid-catalyzed condensation of a dipyrromethane-dicarbinol and a dipyrromethane followed by oxidation with DDQ. Optimal conditions for the condensation were identified after examining various reaction parameters (solvent, temperature, acid, concentration, time). The conditions identified (2.5 mM reactants in acetonitrile containing 30 mM TFA at room temperature for <7 min) provided reaction without detectable scrambling (LD-MS) for aryl-substituted dipyrromethanes, and trace scrambling for alkyl-substituted dipyrromethanes. The desired porphyrins were obtained in 14-40% yield. The synthesis is compatible with diverse functionalities: amide, aldehyde, carboxylic acid, ester, nitrile, ether, bromo, iodo, ethyne, TMS-ethyne, TIPS-ethyne, perfluoroarene. In total 30 porphyrins of the types A(3)B, trans-A(2)B(2), trans-AB(2)C, cis-A(2)B(2), cis-A(2)BC, and ABCD were prepared, including >1-g quantities of three porphyrins.     

Synthesis and excited-state photodynamics of a chlorin-bacteriochlorin dyad--through-space versus through-bond energy transfer in tetrapyrrole arrays.

Understanding energy transfer among hydroporphyrins is of fundamental interest and essential for a wide variety of photochemical applications. Toward this goal, a synthetic free base ethynylphenylchlorin has been coupled with a synthetic free base bromobacteriochlorin to give a phenylethyne-linked chlorin-bacteriochlorin dyad (FbC-pe-FbB). The chlorin and bacteriochlorin are each stable toward adventitious oxidation because of the presence of a geminal dimethyl group in each reduced pyrrole ring. A combination of static and transient optical spectroscopic studies indicate that excitation into the Qy band of the chlorin constituent (675 nm) of FbC-pe-FbB in toluene results in rapid energy transfer to the bacteriochlorin constituent with a rate of approximately (5 ps)(-1) and efficiency of >99%. The excited bacteriochlorin resulting from the energy-transfer process in FbC-pe-FbB has essentially the same fluorescence characteristics as an isolated monomeric reference compound, namely a narrow (12 nm fwhm) fluorescence emission band at 760 nm and a long-lived (5.4 ns) Qy excited state that exhibits a significant fluorescence quantum yield (Phif=0.19). F?rster calculations are consistent with energy transfer in FbC-pe-FbB occurring predominantly by a through-space mechanism. The energy-transfer characteristics of FbC-pe-FbB are compared with those previously obtained for analogous phenylethyne-linked dyads consisting of two porphyrins or two oxochlorins. The comparisons among the sets of dyads are facilitated by density functional theory calculations that elucidate the molecular-orbital characteristics of the energy donor and acceptor constituents. The electron-density distributions in the frontier molecular orbitals provide insights into the through-bond electronic interactions that can also contribute to the energy-transfer process in the different types of dyads.     

Synthetic chlorins bearing auxochromes at the 3- and 13-positions

Synthetic chlorins bearing diverse auxochromes at the 3- and 13-positions of the macrocycle are valuable targets given their resemblance to chlorophylls a and b, which bear 3-vinyl and 13-keto groups. A de novo route has been exploited to construct nine zinc chlorins bearing substituents at the 3- and 13-positions and two benchmark zinc chlorins lacking such substituents. The chlorins are sterically uncongested and bear (1) a geminal dimethyl group in the reduced pyrroline ring, (2) a H, an acetyl, a triisopropylsilylethynyl (TIPS-ethynyl), or a vinyl at the 3-position, (3) a H, an acetyl, or TIPS-ethynyl at the 13-position, and (4) a H or a mesityl at the 10-position. The synthesis of the 13-substituted chlorins relied on p-TsOH x H2O-catalyzed condensation of an 8,9-dibromo-1-formyldipyrromethane (eastern half) and 2,3,4,5-tetrahydro-1,3,3-trimethyldipyrrin (western half), followed by metal-mediated oxidative cyclization, affording the 13-bromochlorin. Similar use of a bromo- or TIPS-ethynyl-substituted western half provided access to 3-substituted chlorins. A 3-bromo, 13-bromo, or 3,13-dibromochlorin was further transformed by Pd-coupling to introduce the vinyl group (via tributylvinyltin), TIPS-ethynyl group (via TIPS-acetylene), or acetyl group (via tributyl(1-ethoxyvinyl)tin, followed by acidic hydrolysis). In the 10-mesityl-substituted zinc chlorins, the series of substituents, 3-vinyl, 13-TIPS-ethynyl, 3-TIPS-ethynyl, 13-acetyl, 3,13-bis(TIPS-ethynyl), 3-TIPS-ethynyl-13-acetyl, or 3,13-diacetyl, progressively causes (1) a redshift in the absorption maximum of the B band (405-436 nm) and the Q(y) band (606-662 nm), (2) a relative increase in the intensity of the Q(y) band (I(B)/I(Q) = 4.2-1.5), and (3) an increase in the fluorescence quantum yield phi(f) (0.059-0.29). The zinc chlorins bearing a 3-TIPS-ethynyl-13-acetyl or a 3,13-diacetyl group exhibit a number of spectral properties resembling those of chlorophyll a or its zinc analogue. Taken together, this study provides access to finely tuned chlorins for spectroscopic studies and diverse applications.     

Nicotinamide Adenine Dinucleotide Oxidation Studies at Multiwalled Carbon Nanotube/Polymer Composite Modified Glassy Carbon Electrodes

NADH oxidation has previously been investigated at carbon nanotube surfaces, although studies into the effect of the polymer binders are needed to fully understand whether the polymer binder affects the electrochemistry. This work details NADH oxidation at glassy carbon electrodes modified with composites containing multiwalled carbon nanotubes and selected polymer binders. NADH is shown to be oxidized at a lower potential than at glassy carbon electrodes and the oxidation potential is a function of the polymer binder. Hydrophobically modified Nafion, Nafion, linear poly(ethylenimine) (LPEI), octyl‐modified LPEI, and poly(vinylpyridine) binders were studied. Experiments showed the peak current and electrochemically assessible electrode area are dependent on the polymer binder. Overall, this paper shows that polymer binders affect NADH oxidation potential at carbon nanotube modified electrodes.     

Ciliation and lamellae in crystalline polymers

Molecular cilia, the uncrystallized portions of chains already partly attached to polymer crystals, exert a profound influence on the course of polymeric crystallization with ultimate responsibility for the divergence of adjacent lamellae which leads to spherulitic growth. Their effective size and pressure have been measured, in α-polypropylene, from electron microscopic measurements of the separation and maximum curvature of lamellae in row structures. That cilia exist and extend the effective region occupied by a lamella beyond the geometrical confines of its fold surfaces is important for crystallization theory and may well have implications for the connection of lamellae into networks and for gelation.     

A trans-AB-bacteriochlorin building block

Synthetic bacteriochlorins are of interest for fundamental studies in photochemistry because of their strong absorption in the near-infrared spectral region and close similarity with natural bacteriochlorophylls. A de novo route to 5-methoxybacteriochlorins entails self-condensation of a dihydrodipyrrin-acetal, which in turn is prepared from a 2-(2-nitroethyl)pyrrole species and an α,β-unsaturated ketone-acetal (e.g., 1,1-dimethoxy-4-methylpent-3-en-2-one). Here, four new results are reported concerning the synthesis of substituted bacteriochlorins. First, a new, scalable route to 1,1-dimethoxy-4-methylpent-3-en-2-one removes a significant previous impediment to the overall route. Second, the new route was employed to gain access to new α,β-unsaturated ketones and corresponding dihydrodipyrrins bearing alternative substituents in place of the dimethoxy unit. Third, a dihydrodipyrrin bearing a 1,3-dioxolan-2-yl moiety afforded the bacteriochlorin (30% yield) containing a 2-hydroxyethoxy substituent at the 5-position. Fourth, subsequent bromination proceeded regioselectively at the 15-position to give a trans-(5,15)-AB-bacteriochlorin building block. The linear 5,15-substitution pattern is attractive for a number of molecular designs. The results taken together afford deeper understanding of the scope and limitations of the de novo route and also advance the capabilities for tailoring synthetic bacteriochlorins.     

Biologically driven neural platform invoking parallel electrophoretic separation and urinary metabolite screening

This work reveals a computational framework for parallel electrophoretic separation of complex biological macromolecules and model urinary metabolites. More specifically, the implementation of a particle swarm optimization (PSO) algorithm on a neural network platform for multiparameter optimization of multiplexed 24-capillary electrophoresis technology with UV detection is highlighted. Two experimental systems were examined: (1) separation of purified rabbit metallothioneins and (2) separation of model toluene urinary metabolites and selected organic acids. Results proved superior to the use of neural networks employing standard back propagation when examining training error, fitting response, and predictive abilities. Simulation runs were obtained as a result of metaheuristic examination of the global search space with experimental responses in good agreement with predicted values. Full separation of selected analytes was realized after employing optimal model conditions. This framework provides guidance for the application of metaheuristic computational tools to aid in future studies involving parallel chemical separation and screening. Adaptable pseudo-code is provided to enable users of varied software packages and modeling framework to implement the PSO algorithm for their desired use.