Preparation and characterization of functional group gradient surfaces

Functional group gradient surfaces where the density of functional groups changes gradually along the sample length were prepared. The functional group (? COOH, ? CONH₂, and ? OH group) gradient surfaces were produced by the treatment of low-density PE sheets using a corona with gradually increasing power, followed by the graft copolymerization of acrylic acid and subsequent substitution reaction of carboxylic acid groups to amide or hydroxyl groups. The prepared gradient surfaces were characterized by the measurement of water contact angle, FTIR-ATR, and ESCA. The gradient surfaces prepared can be used to systematically investigate the interactions of biological or other species in terms of the surface functional groups and their density of polymeric materials. © 1994 John Wiley & Sons, Inc.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Chemical Constituents from Cynoglossum gansuense

Two new alkaloids, i.e., (2,3‐dihydro‐1‐oxo‐1H‐pyrrolo[1,2‐a]pyrrol‐7‐yl)methyl (2S*,3S*)‐3‐[(β‐D ‐glucopyranosyl)oxy]‐2‐hydroxy‐2‐(1‐methylethyl)butanoate ( 1 ) and 1,2‐dihydro‐8‐methoxy‐2‐oxoquinoline‐4‐carboxylic acid ( 2 ), were isolated from the alcoholic extract of the whole plant of Cynoglossum gansuense, together with twelve known compounds Their structures were characterized by means of spectroscopic methods, especially by ¹H‐, ¹³C‐, and 2D‐NMR, as well as by HR‐MS experiments and comparison with literature data.     

Synthesis and crystallization kinetics of the novel ion exchanger Na<Subscript>4</Subscript>Ti<Subscript>4</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript> for cesium removal

Thermodynamics and crystallization kinetics of the hydrothermal synthesis of Na₄Ti₄Si₃O₁₀ (NaTS) were systemically studied by both experiments and model simulation. Experimental results showed that the curve of crystallinity with time was a characteristic signmoid in the shape that indicated the crystallization of Na₄Ti₄Si₃O₁₀ was a typical spontaneous nucleation process on the laboratory scale. Crystallization of NaTS belongs to the liquid-liquid transformation mechanism and the reaction is endothermic (ΔH = 15.3 kJ/mol). A mathematic model of crystallization kinetics was developed to simulate the synthesis of NaTS. Runge-Kutta and simplex methods were adopted to solve the partial differential equations. Model results fitted well with the experimental data and showed that the synthesis process belongs to spontaneous nucleation and crystal growth. Moreover, the very small crystal growth constant (5.6·10⁻⁷) and gel dissolution constant (7.0·10⁻⁷) indicate they are the rate-limiting steps of the whole synthesis process.     

Correlating second harmonic optical responses of single Ag nanoparticles with morphology

Femtosecond laser excited second harmonic (SH) activity from single Ag nanoparticles is reported. A correlation of SH single-particle measurements with high-resolution imaging of particle morphology by TEM was achieved by creating position markers on an optical and electron transparent substrate (Si3N4 thin film, approximately 100 nm). We compared the SH activity of single Ag nanoparticles (nanospheres versus nanorods) and cluster structures (composed of two or multiple particles, e.g., dimers and trimers). The direct correlation of single-particle structures and SH activity, spectral and power dependence, strongly suggests one-photon resonant driven nonlinear oscillator response mechanism.     

Pressure-induced hydration at 0.6 GPa in a synthetic gallosilicate zeolite

The onset of pressure-induced hydration and volume expansion is lowered to 0.6 GPa via the increased flexibility of the host lattice using isomorphous substitution of Al by larger Ga in a sodium aluminosilicate natrolite.     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

Synthesis, structure and heterogeneous catalytic activities of Cu-containing polymeric compounds: anion effect and comparison of homogeneous vs. heterogeneous catalytic activity

The structures of new polymeric compounds containing Cu(II) ions and btp (2,6-bis(N'-1,2,4-triazolyl)pyridine) ligands have been determined. The btp ligands bridge Cu(II) ions to form double zigzag chains, [Cu(ClO4)2(btp)2] 3 with perchlorate anions, and form single zigzag chains, [Cu(btp)(H2O)4](SO4).2H2O 4 with sulfate anions. The polymeric compound 3 was found to effectively catalyze the epoxide ring-opening reaction with methanol, while polymeric compound 4 was almost inactive with epoxides under the same conditions. The polymeric compound 3 showed an efficient catalytic activity and regioselective reactivity in the ring opening of epoxides and allowed reuse without a significant loss of activity through three runs with epoxides.     

碱性体系在线氢化物发生—原子荧光光谱法测定痕量铋

提出了一种碱性体系在线氢化物发生－原子荧光光谱法测定痕量铋的分析方法。设计了在线氢化物发生系统流路及操作程序，研究了碱性体系氢化物发生的各项最佳条件。方法操作简便快速，能有效地消除过渡元素的严重化学干扰。应用于黄铜标样中痕量铋的直接测定，获得满意结果。     

Thermoregulated Liquid/Liquid Biphasic Catalysis and Its Application

A brief overview of our recent research results of thermoregulated liquid/liquid biphasic catalysis is presented. Emphasis is given to the general principles of thermoregulated phase-transfer catalysis (TRPTC) and thermoregulated phase-separable catalysis (TPSC). In addition, the applications of TRPTC and TPSC in biphasic catalysis are also discussed. The introduction of TRPTC to biphasic system is free from the shortcomings of classical aqueous/organic two-phase catalysis, in which the application scope is restrained by the water solubility of the substrate. Meanwhile, TPSC provides a very simple and reliable way to deal with the separation of catalyst in homogeneous catalysis. The common advantages of TRPTC and TPSC are characterized by homogeneous catalysis coupled with convenient biphasic separation.