Fundamental studies on the intermediate layer of a bipolar membrane: Part III. Effect of starburst dendrimer PAMAM on water dissociation at the interface of a bipolar membrane

Starburst dendrimer polyamidoamine (PAMAM) with ellipsoidal or spheroidal shape is structure-regular and has much more amino groups than conventional polymers. This paper investigates the possibility of these amino groups on water dissociation in a bipolar membrane interface. To do this, a bipolar membrane is prepared by casting the solution of sulfonated poly(phenylene oxide) (SPPO) in dimethyl formamide (DMF) on a commercial anion exchange membrane that is immersed in PAMAM aqueous solution in advance. The existence of PAMAM adsorbed on the membrane is proved by X-ray photoelectron spectroscopy (XPS), and the adsorption amount is evaluated by weighting method. The junction thickness of the prepared bipolar membrane is determined by electrochemical impedance spectroscopy (EIS), and the performance is evaluated by current–voltage curves. The experiments show that both the generation and concentration of PAMAM would strongly affect the characteristics of the bipolar membranes. There exists a transitional concentration for various generations PAMAMs to catalyze effectively the water dissociation, and above or below the transitional concentration the performance of bipolar membranes is decreasing. The higher the generation, the lower the concentration. Moreover, at a fixed solution concentration, there is not the simple relation of monotone decreasing or increasing between the performance of bipolar membranes and the generations of PAMAMs. All these can be explained according to the characteristics of PAMAMs combined with available water dissociation theory.     

丙烯酸酯和甲基丙烯酸酯基团转移共聚研究

研究了三种丙烯酸酯分别和四种甲基丙烯酸酯的基团转移共聚，用１Ｈ ＮＭＲ法测定共聚物组成，扩展的Ｋｅｌｅｎ Ｔｕｄｏｓ法测定竞聚率，结果为γＭＡ＝９２３、γＭＭＡ＝００６；γＥＡ＝１４１５、γＭＭＡ＝００１；γＢＡ＝７５１、γＭＭＡ＝００２；γＭＡ＝１４４１、γＥＭＡ＝００１；γＭＡ＝１３９６、γＢＭＡ＝０２３；γＭＡ＝８６６、γｉ ＢＭＡ＝００８，表明基团转移聚合同阴离子聚合有明显的相似之处．     

东太平洋深海锰结核的化学元素研究

用ICP-AES法测定了东太平洋深海锰结核样品中二十多种主，次及微量元素，结果表明，表面瘤状和表面光滑两种类型锰结核的化学元素含量有较明显的区别，如表面光滑的锰结核TiO2含较高，而表面瘤状的锰结核Mn/Fe之值较高等。     

硫化物/Ru(II)络合物复合敏化TiO2纳米多孔膜

用光电化学方法研究了ＣｄＳ,ＰｄＳ和Ｒ１１Ｌ２（ＮＣＳ）２,（Ｌ＝２,２′－ｂｉｐｙｄｉｎｅ－４,４′－ｄｉｃａｒｂｏｘｙｌｉｃａｃｉｄ）复合敏化ＴｉＯ２纳米晶电极的光电化学行为,结果表明,采用复合敏化比用Ｒ１１（ＩＩ）络合物单独敏化ＴｉＯ２纳米晶电极效果好,大大提高了光电转换效率,主要原因是采用复合敏化,可防止ＴｉＯ２导带上由光注入产生的电子的反向转移,避免了电子的损失。     

立方介孔相含钕氧化硅的合成与表征

以十六烷基三甲基溴化铵为结构导向剂，通过水热法合成了具有立方结构的含钕Nd-MCM-48介孔分子筛材料。XRD和TEM测试表明当n_Nd/n_Si<0.05时可以获得典型的长程有序介孔立方结构相，随n_Nd/n_Si比的增加，晶胞参数的增大和红外吸收光谱(FT-IR)的变化为Nd进入介孔分子筛骨架中提供了有力证据。N₂吸附-脱附实验给出了其BET表面积为1 195 m²·g^-1，BJH平均孔径为3.6 nm。紫外-可见漫反射光谱(UV-Vis)证明钕氧形成一种八面体结构。X射线光电子能谱(XPS)进一步证明钕主要以三价形式存在于立方介孔分子筛骨架中。     

在吡啶溶剂中氯化镍催化的溴代芳烃自身偶联反应

Pyridine was used as a solvent for homocoupling of aryl bromides catalyzed by nickel chloride/triarylphosphinein the presence of zinc and recycled easily.Triphenylphosphine was the best ligand for nickel in this coupling reac-tion.     

无机纳米管材料合成进展

无机材料的微观结构决定了材料的许多特性,如传输行为、催化活性、分离效率、粘附、储存和释放动力学。具有管状结构纳米尺度的材料由于其特殊的结构及由此带来的特殊性能正成为一个令人兴奋的化学研究领域。文章综述了近年来无机纳米管材料的合成途径和进展。     

Effect of La_2O_3/γAl_2O_3 Catalyst on the Activation of CH_4 and CO_2 to C_02 Hydrocarbons under Non-equilibrium Plasma

The oxidative coupling of methane (OCM) to C2 hydrocarbons using carbon dioxide as oxidant is an attractive process from environmental point of view. Only a few research papers reported for it1-3. In general, the yield of C2 hydrocarbons was about 6%. This indicated that the method of catalytic activation was unfavorable to the reaction. It is necessary for us to find a new method in order to activate reaction and improve C2 hydrocarbon yield. Non-equilibrium plasma is a cold plasma in…     

信息型常见毒物质谱用户库的建立及其在毒物快速筛选上的应用研究

质谱定性是目前世界上最通用的定性分析方法之一,在法庭科学领域毒物分析实践中,质谱一直是对未知样品进行药毒物筛选检测的利器.     

New Type High Efficient Quasi-Solid-State Ionic Liquid Electrolyte for Dye-Sensitized Solar Cells

For the fist time the preparation of a mostly solid-state high efficiem electro-conductive material comprising 1-methyl-3-propylimidazolium iodide （MPII）, benzimidazole （BI）, iodine and lithium iodide was reported. In this electrolyte, BI acts as not only additives but also gelators. With its significant electrochemical properties, an overall efficiency of 3.07% was achieved under AM 1.5 （100 mW/cm^2）.