Ga1-xInxNyAs1-y/GaAs量子阱中电子-LO声子的散射率

在有效质量近似下利用打靶法求出Ga_1-xIn_xN_yAs_1-y/GaAs量子阱中的本征能级E_n, 并通过费米黄金规则计算电子-LO声子由第一激发态到基态的散射率和平均散射率随温度、阱宽以及氮(N)和铟(In)组分变化的规律. 计算结果表明: 在In 组分恒定的情况下, 随着N组分的增加, 散射率和平均散射率增加; 在N组分恒定的情况下, 随着In组分的增加, 散射率和平均散射率减小; 随着温度的增加, 在温度较低时散射率和平均散射率随温度的增加变化不大, 在温度较高时随温度的增加而增加; 随着阱宽的增加, 散射率和平均散射率都是先增加到一个最大值, 然后再减小, 最大值出现在阱宽200 Å附近. 计算结果对Ga_1-xIn_xN_yAs_1-y/GaAs量子阱在光电子器件应用方面有一定的指导意义. 关键词： 费米黄金规则 1-xIn_xN_yAs_1-y/GaAs量子阱')" href="#">Ga_1-xIn_xN_yAs_1-y/GaAs量子阱 LO声子 散射率     

Investigation of Carbon Black Network in Natural Rubber with Different Bound Rubber Contents

A new method was applied to modify the surface activity of virginal carbon black (VCB). LA‐57, one kind of hindered amine light stabilizer, was adsorbed onto the carbon black surface through a strong shear force induced by the screws of a HAAKE internal mixer. The modified carbon black (MCB) was characterized by FT‐IR and thermogravimetric analysis (TGA). The bound rubber content of the natural rubber (NR) compounded with MCB and VCB varied with the fraction of LA‐57 on the MCB surface. The nonlinear effect at small strains, generally referred as the Payne effect, was investigated in the rubber compounds based on the different bound rubber contents. The NR compound containing the lowest bound rubber content had an obvious Payne effect. Based on the bound rubber content, the types of filler network varied from direct contact mode to the joint rubber shell mechanism.     

Interaction between isoamyl adenine and rice cytokinin oxidase

Cytokinin (CTK) dehydrogenase is responsible for regulating the endogenous CTK content by oxidative removal of the side chain. Herein, we have applied fluorescence method to study the interaction between CTK dehydrogenase and CTK in vitro and obtain some parameters of their interaction. We found that addition of isopentenyl adenine can quench the fluorescence of CTK dehydrogenase, and the quenching mechanism was to be a static quenching procedure. We have measured the number of binding sites n and the apparent binding constant K and have calculated the thermodynamics parameter ΔH, ΔG, and ΔS by fluorescence quenching method. Based on thermodynamics parameter’s results, we concluded that their binding reaction was both entropy driven and the enthalpy driven, and the Van der Waals force and hydrogen bond force played a major role in the interaction. Based on the synchronous fluorescence spectrometry results, we demonstrated that the binding site between isopentenyl adenine and CTK dehydrogenase is in the microenvironment of both tryptophan and tyrosine. The fluorescence signal of coenzyme, flavin adenine dinucleotide, decreases gradually with the addition of isopentenyl adenine. And this method can be used for isopentenyl adenine routine assay. Under optimized experimental parameters, the linear segment increases from 0.6 µM to 100 µM with a regression equation of ΔF = 0.04 + 0.15c_ip (r = 0.999, c_ip in µM) with the detection limit of 0.15 µM iP.     

Performance characteristics of single photon pulse ranging system using Monte Carlo simulation

Single photon pulse ranging system with extremely high sensitivity has been widely used in distance measurement and 3D imaging. To analyze the factors that affect the measurement precision and accuracy will help to improve system performance. According to system structure and principle, we mainly discussed the following factors: laser intensity, pulse width, detection efficiency and time jitter. A simulation model based on Monte Carlo stochastic method was constructed in this paper, and we get the specific influence of factors on measurement precision and accuracy by simulation. Finally, we set up laboratory experiment system and took effective experiments on ranging precision and accuracy.     

Microscopy of pentacene thin films

Thin films of pentacene were deposited by vacuum sublimation onto amorphous carbon, glass, silicon and mica substrates, then characterized by X-ray and electron diffraction, transmission electron microscopy (TEM) and atomic-force microscopy (AFM). Sub-monolayer films consist of dendritic islands, which change to more compact fractal shapes upon transforming to a multilayer structure (with decrease in surface area) prior to complete coverage of the substrate. Increased crystallite size was obtained by heating the substrate during deposition and by post-deposition annealing. Irradiation with 200-keV electrons was found to destroy the crystallinity of the films after a dose of 0.6?C/cm² (or 2?C/cm² if the specimen is cooled to 90?K during TEM observation). We argue that, despite this moderate radiation sensitivity, TEM under near-optimal conditions can image monolayers of pentacene with sub-nm resolution.     

提高全息图衍射效率的一种方法

本文介绍用稀释显影提高全息图衍射效率的方法。给出了稀释显影的特性曲线以及衍射效率与显影时间、曝光量之间的关系。得到了三种全息干板的高衍射效率。 关键词：     

均匀磁场下碳离子笔形束的剂量变化分析及位置修正方法

分析外加均匀磁场对于碳离子笔形束剂量分布的影响,并考虑修正这种影响,为磁共振成像引导碳离子放射治疗的临床应用提供指导。本文利用蒙特卡罗方法模拟计算了不同能量碳离子笔形束在不同强度磁场下的剂量分布情况,发现垂直于碳离子束入射方向的均匀磁场对于碳离子笔形束射程缩短的影响很小,磁场对碳离子束的主要影响是引起束流横向偏转,特别是碳离子束布拉格峰位置的横向侧移。横向侧移程度与碳离子束的能量和磁场强度相关,根据模拟结果,得到了一个计算碳离子束布拉格峰在磁场中相对横向偏转的方程,并提出一种校正外加磁场引起的碳离子束布拉格峰横移的角度修正方法。这些结果可用于指导磁共振图像引导碳离子放射治疗计划系统的研发。     

碳离子在不同材料叶片的多叶光栅上产生的次级粒子研究

在碳离子放射治疗中,碳离子束与治疗头设备和患者身体相互作用产生的次级粒子可以到达患者体内的许多区域,在产生的次级粒子中以中子和$\gamma $射线的产额为最大。在不影响束流配送功能的情况下,减少碳离子放疗中产生的次级中子和$\gamma $射线对于降低放疗后出现的正常组织并发症及二次肿瘤风险有着非常重要的意义。本文利用蒙特卡罗(Monte Carlo)方法模拟计算了被动式束流配送系统下,400 MeV/u碳离子束照射到由不同材料叶片构成的多叶光栅(MLC)形成典型的10 cm×10 cm方形射野时,在水模体中产生的次级中子和$\gamma $射线所沉积的剂量及空间分布等。模拟结果显示:碳离子束通过MLC形成射野后在水模体中产生的次级中子主要分布在水模体的入射端,次级$\gamma $射线较为均匀的分布在整个水模体内,且较多分布在具有展宽Bragg峰(SOBP)射野在水模体中贯穿时的坪区。对于MLC叶片材料的选择,则需根据实际情况对叶片厚度以及次级粒子当量剂量的要求来确定。本文通过模拟研究不同MLC叶片材料产生次级粒子的情况,为被动式束流配送系统中MLC叶片及其他元件的材料选择提供了科学依据。     

241Am-Be中子参考辐射的蒙特卡罗模拟研究

研究用于校准场所中子剂量监测仪表的241Am-Be中子参考辐射场计量特性。采用蒙特卡罗方法模拟了空气自由中子参考辐射(FRNR),GB/T 14055规定的最小尺寸中子参考辐射(SRNR)和实际中子参考辐射(ARNR)中不同检验点处中子周围剂量当量率、散射中子占比和能谱分布特征。研究结果表明,空气对FRNR中的剂量率和能谱分布影响小,近似为理想中子参考辐射;采用5%含硼聚乙烯作屏蔽的最小尺寸SRNR可减少热中子,降低散射中子占比,影锥法不适用于小尺寸中子参考辐射中对散射中子的修正;ARNR中的散射中子更少、占比更低,影锥法所得散射中子占比与理论值基本一致。     

一种非正交对称条带束流位置监测器设计

介绍了一种条带束流位置监测器（BPM）的设计与仿真方法。在国家同步辐射实验室“太赫兹近场高通量材料物性测试系统”工程项目中,针对波荡器出口处真空室非正交对称性的问题,设计了矩形真空室和跑道形真空室下的两种非正交对称性条带BPM,并与传统的圆形真空室下条带BPM进行对比。基于边界元法,利用MATLAB软件分别对三种真空室下的条带BPM进行建模和仿真。仿真结果表明：相对于传统的圆形真空室下条带BPM,矩形和跑道形真空室下条带BPM灵敏度提高了30%,阻抗匹配误差相对降低了20%,束流位置拟合误差降低了80%。考虑加工精度,矩形真空室下的条带BPM更适用于该工程。