Contribution of the surface dipole moment and the contact potential-induced disjoining pressure to the stress balance at a three-phase contact

The contact between three insulators results in a set up of contact potentials related to the adsorbed dipole moment at each surface. The produced electric field applies force (disjoining pressure) on each interface. This disjoining pressure is a long-ranged force (1/distance²) which is proportional to the difference between the dielectric permittivities of the phases on the two sides of the interface and, for small angles, to the square of the contact angle. The contact potential leads to a logarithmic perturbation of the profile of the three-phase contact zone.     

Determination of gold and palladium in rocks and ores by atomic absorption spectrometry using two-stage probe atomization

The efficiency of two-stage probe atomization for the determination of gold and palladium in geological samples by electrothermal atomic absorption spectrometry is studied. The effects of temperature–time program and the position of the probe in an atomizer on the fractionation of sample components and the magnitude of the analytical signal are studied. It is demonstrated that gold and palladium can be quantitatively determined by atomic absorption spectrometry in rocks and ores, using a two-stage probe atomization with the limits of detection for gold and palladium 0.01 and 0.04 g/t, respectively.     

An electrochemical aptasensor for cytochrome C,based on pillar[5]arene modified with Neutral Red

An electrochemical aptasensor is developed for the highly sensitive determination of cytochrome C, using a change in the redox current of Neutral Red covalently bound to terminal carboxyl groups of decasubstituted pillar[5]arene as a signal. The inclusion of the analyte into the complex with an aptamer reduces peaks of redox current of the dye through the dissociation of electron transfer chain in the surface layer. The aptasensor enables the determination of 1 nM to 1.0 mM of cytochrome C in the presence of 1000-fold excesses of albumin, polyethylene glycol, and lysozyme as models of interfering components in biological fluids.     

A New Approach to Increasing the Resolution of a Mass Spectrometer with Wedge-Shaped Reflectors

The paper describes the investigation of the ion-optical properties of a laser TOF mass spectrometer including two successively positioned wedge-shaped ion mirrors. Some specific properties of the configuration of ion trajectories near their reflection in the second ion reflector are found. The dependence of aberrations on ion energy acquired toothed shape for the resolution of the analyzer higher than 3000–5000. The approximation of the dependence gave a 15^th degree polynomial. The calculation of polynomial coefficients showed a great contribution to the duration of ion packets for aberrations of higher order. The discovered features allowed us to suggest a way of the local correction of nearby trajectories in the total ion flux. By correcting the local motion of individual groups of ions, we could reduce temporary aberration to 1–1.6 ns, depending on ion energy. For the time of ion flight ~35 μs, such duration limits the resolution of the analyzer by a value not less than 10000. The real length of ion drift path was about 30 cm. The total overall sizes of the ionoptical system were ~24 × 19 × 5 cm.     

Alkylation of phenol with olefins in the presence of catalysts based on mesoporous aromatic frameworks

Mesoporous polyaromatic frameworks (PAFs) based on tetraphenylmethane were obtained and modified with sulfonic acid groups. The compounds were characterized by solid-state ¹³C NMR and IR spectroscopy, low-temperature nitrogen adsorption-desorption, and transmission electron microscopy. The acidities of the PAF-1-SO₃H and PAF-2-SO₃H samples determined by titration were 3.99 mmol g^–1 and 0.91 mmol g^–1, respectively. The catalytic activity of PAF-SO₃H for alkylation of phenol with linear terminal olefins was investigated. The reaction products were isomeric monoalkylphenols (C-alkylates), and alkyl phenyl ethers (O-alkylates).     

Synthesis and properties of 1-(R-adamant-1-yl)-3-(1-propionylpiperidin-4-yl)ureas and 4-({4-[3-(R-adamant-1-yl)ureido]cyclohexyl}oxy)benzoic acids,efficient target-oriented human soluble epoxide hydrolase inhibitors

A reaction of R-adamant-1-yl isocyanates with 4-[(4-aminocyclohexyl)oxy]benzoic acid and 1-(4-aminopiperidin-1-yl)propan-1-one in DMF afforded corresponding ureas in 90—95% yield, the target-oriented inhibitors of epoxide hydrolase sEH. The ureas are characterized by reduced melting points and increased solubility in water, as well as by inhibitory activity in the range of 0.5—4.0 nmol L^–1.     

Preconcentration and separation of <Superscript>99</Superscript>Tc in groundwater by using TEVA resin

An effort has been made to optimize the counting time for low-level measurement of naturally occurring radioactive material (NORM) by considering the standard deviation between the activity values of different photopeaks and counting error. It is observed that at lower counting time, relative standard deviation (RSD) varies randomly, but attains a gradual trend with increasing time and also comes closure to the counting error. Therefore minimum counting time for low-level NORM measurement of ²³⁸U and ²³²Th would be the time required to stabilize the RSD values.     

Polyethylenimine and tris(2-aminoethyl)amine modified p(GA–EGMA) microbeads for sorption of uranium ions: equilibrium,kinetic and thermodynamic studies

Poly(glycidyl methacrylate-ethyleneglycol dimethacrylate), p(GA–EGMA), microbeads were prepared through suspension polymerization. It was decorated with polyethylene imine (PEIM) and tris(2-aminoethyl)amine (TAEA) ligands to decorate with polyamine groups. These microbeads were used for sorption of uranium ions from aqueous solution. The maximum sorption of uranium ions on the PEIM and TAEA modified microbeads was observed at pH 6.0. The maximum sorption capacity of acid hydrolyzed p(GA–EGMA)–OH, p(GA–EGMA)–PEIM and p(GA–EGMA)–TAEA microbeads was found to be 7.21, 87.8 and 64.3 mg g^?1. The sorption process conforms to the pseudo-second order kinetic model and the Langmuir and Temkin isotherm models well.     

Measurement of <Superscript>3</Superscript>H,gross <Emphasis Type="Italic">α/β</Emphasis> and <Superscript>222</Superscript>Rn in drinking water using the new Quantulus GCT 6220

Since the introduction of the European Council Directive 2013/51 Euratom in October 2013, the analysis of drinking water has increasingly become the focus of many laboratories in Europe. The activity of tritium, radon and the gross α/β-activity is determined routinely. In order to cope with the increased sample numbers and to reach the necessary detection limits, sensitive measuring devices are required. This work was done with the new Quantulus GCT 6220 to test the sensitivity of this system for drinking water analysis. The results indicate that this instrument is very well suited for this type of analysis and counting times are typically below the required counting times of established systems.