Luminescence investigations of the GaP-based dilute nitride Ga(NAsP) material system

Multi-quantum well heterostructures (MQWHs) of the novel Ga(NAsP)/GaP material system have been grown, pseudomorphically strained to GaP-substrate. The crystalline perfection is verified by transmission electron microscopy (TEM). For As-concentrations in excess of about 70%, a direct band structure and adequate luminescence efficiency for laser device application is observed. Temperature-dependent photoluminescence (PL) investigations show the influence of carrier localisation and non-radiative recombination processes typical for dilute nitride materials. With rising N content in the active material, the emission wavelength shifts towards longer wavelength, leading to Ga(NAs)/GaP MQW structures with photon energies below the indirect band gap of silicon (Si). At the same time the luminescence intensity drops due to an increase in non-radiative carrier traps and/or structural degradation.     

Contact Interaction of Two Elastic Wedges

We consider the problem of contact of two elastic wedges and assume that only the vertices of the wedges touch before loading. After loading, the edges of both wedges come in contact near their common vertex. We reduce the constructed system of dual integral equations to a Fredholm integral equation of the second kind with difference kernel given on the semiaxis. We analytically solve the Fredholm equation by reducing it to the boundary-value Riemann problem for analytic functions. We obtain an analytic expression for contact stresses.     

Raman spectroscopy of topotecan, an inhibitor of DNA topoisomerase I

Topotecan (TPT), a water-soluble derivative of camptothecin (inhibitor of human DNA topoiomerase I), has found wide application in cancer chemotherapy. The central problem in using topotecan is the presence of lactone rings in its molecules, which undergo hydrolysis at a physiological pH yielding an inactive and even toxic form of the drug. The analysis of Raman spectra of TPT in H₂O and D₂O solutions made it possible to assign the spectral bands to the vibrations of particular molecular groups. Spectral features indicative of the opening of the lactone rings of the TPT molecules, deprotonation of the hydroxyl groups in their quinoline fragments, and of possible participation of the hydroxyl and carbonyl groups in H bonding are found. The data obtained are necessary to study the molecular mechanisms of TPT-DNA interaction and the formation of ternary complexes between TPT, DNA, and DNA topoisomerase I.     

Towards Treating Correlations in Bose Condensates

 We use the adiabatic hyperspheric expansion and the Faddeev decomposition of the wave function with only s-waves. We derive for a fixed hyperradius an integro-differential equation for the angular eigenvalue and wave function. The correlations lower the interaction energy for N = 20 by about a factor of 5. Received October 22, 2001; accepted for publication November 5, 2001     

A MODEL OF TROPICAL MARINE RESERVE‐FISHERY LINKAGES

ABSTRACT. The excessive and unsustainable exploitation of our marine resources has led to the promotion of marine reserves as a fisheries management tool. Marine reserves, areas in which fishing is restricted or prohibited, can offer opportunities for the recovery of exploited stock and fishery enhancement. In this paper we examine the contribution of fully protected tropical marine reserves to fishery enhancement by modeling marine reserve‐fishery linkages. The consequences of reserve establishment on the long‐run equilibrium fish biomass and fishery catch levels are evaluated. In contrast to earlier models this study highlights the roles of both adult (and juvenile) fish migration and larval dispersal between the reserve and fishing grounds by employing a spawner‐recruit model. Uniform larval dispersal, uniform larval retention and complete larval retention combined with zero, moderate and high fish migration scenarios are analyzed in turn. The numerical simulations are based on Mombasa Marine National Park, Kenya, a fully protected coral reef marine reserve comprising approximately 30% of former fishing grounds. Simulation results suggest that the establishment of a fully protected marine reserve will always lead to an increase in total fish biomass. If the fishery is moderately to heavily exploited, total fishery catch will be greater with the reserve in all scenarios of fish and larval movement. If the fishery faces low levels of exploitation, catches can be optimized without a reserve but with controlled fishing effort. With high fish migration from the reserve, catches are optimized with the reserve. The optimal area of the marine reserve depends on the exploitation rate in the neighboring fishing grounds. For example, if exploitation is maintained at 40%, the ‘optimal’ reserve size would be 10%. If the rate increases to 50%, then the reserve needs to be 30% of the management area in order to maximize catches. However, even in lower exploitation fisheries (below 40%), a small reserve (up to 20%) provides significantly higher gains in fish biomass than losses in catch. Marine reserves are a valuable fisheries management tool. To achieve maximum fishery benefits they should be complemented by fishing effort controls.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

High-temperature expansions to fifteenth order

High-temperature series expansions of the susceptibility and second moment to 15th order are calculated for zero external field on the linear chain (LC), plane square (PSQ), simple cubic (SC), and body-centered cubic (BCC) lattices. Checks for specific models against pertinent work in the literature are detailed.     

Semi‐analytical integration of the 8‐node plane element stiffness matrix using symbolic computation

The semi‐analytical integration of an 8‐node plane strain finite element stiffness matrix is presented in this work. The element is assumed to be super‐parametric, having straight sides. Before carrying out the integration, the integral expressions are classified into several groups, thus avoiding duplication of calculations. Symbolic manipulation and integration is used to obtain the basic formulae to evaluate the stiffness matrix. Then, the resulting expressions are postprocessed, optimized, and simplified in order to reduce the computation time. Maple symbolic‐manipulation software was used to generate the closed expressions and to develop the corresponding Fortran code. Comparisons between semi‐analytical integration and numerical integration were made. It was demonstrated that semi‐analytical integration required less CPU time than conventional numerical integration (using Gaussian‐Legendre quadrature) to obtain the stiffness matrix. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Co-Segregation Effects on Boundary Migration

We analyze the effect of co-segregation on the mobility of grain boundaries within the framework of the impurity drag theory originally proposed by Cahn and Lücke and Stüwe for an ideal solution. The new derivation extends this model to the case where there are two types of impurities (or three components in the alloy). Since the resultant expression for the boundary mobility is complicated, numerical solutions were obtained for several cases to show how co-segregation affects the boundary mobility. Depending on the relative diffusivities of the two impurities which are both attracted to the boundary, the mobility may either increase or decrease with increasing concentration of one of the impurities. When one of the impurities is attracted to the boundary and the other repelled from the boundary, increasing the concentration of the attractive impurity can lead to a sharp decrease in the boundary mobility.